| Naslov: | Impact of sintering temperature on structural, microstructural and electrical properties of screen-printed ▫$0.7Pb(Fe_{0.5}Nb_{0.5})O_3–0.3BiFeO_3$▫ thick films |
|---|
| Avtorji: | ID Goričan, Ivana, Institut "Jožef Stefan" (Avtor)
ID Benčan, Andreja, Institut "Jožef Stefan" (Avtor)
ID Drnovšek, Silvo, Institut "Jožef Stefan" (Avtor)
ID Iacomini, Antonio, Institut "Jožef Stefan" (Avtor)
ID Suban, Nejc, Institut "Jožef Stefan" (Avtor)
ID Kmet, Brigita, Institut "Jožef Stefan" (Avtor)
ID Prah, Uroš, Institut "Jožef Stefan" (Avtor)
ID Rojac, Tadej, Institut "Jožef Stefan" (Avtor)
ID Uršič Nemevšek, Hana, Institut "Jožef Stefan" (Avtor) |
|---|
| Datoteke: |  URL - Izvorni URL, za dostop obiščite https://www.sciencedirect.com/science/article/pii/S0955221926001937
 PDF - Predstavitvena datoteka, prenos (12,02 MB)
MD5: 4ACD0AB9C565FC59BDD1CA77CABE161F
|
|---|
| Jezik: | Angleški jezik |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: |  IJS - Institut Jožef Stefan
|
|---|
| Povzetek: | (1–x)Pb(Fe0.5Nb0.5)O3–xBiFeO3 (PFN–100xBFO) ceramics exhibit versatile functional properties, from ferroelectric, relaxor to antiferroelectric behaviour, but have not yet been prepared as ceramic thick films, which are the key to miniaturization of electronic components. In this work, screen-printed thick films of PFN–30BFO were prepared on gold-coated alumina substrates and sintered at 800 °C, 850 °C and 930 °C. The impact of the sintering temperature on their properties was studied. The films annealed at 930 °C exhibited excessive electrical conductivity. In contrast, well developed polarization versus electric field hysteresis loops were observed in the films treated at 800 °C and 850 °C. The films annealed at 800 °C had the smallest grain size and dielectric permittivity values but achieved the highest dielectric breakdown strength. The findings of this study highlight the potential of PFN–30BFO screen-printed films, sintered at 800 °C, for use in miniaturized high-voltage electronic devices. |
|---|
| Ključne besede: | thick films, electronic ceramics, sintering temperature |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 05.12.2025 |
|---|
| Datum sprejetja članka: | 16.03.2026 |
|---|
| Datum objave: | 17.03.2026 |
|---|
| Založnik: | Elsevier |
|---|
| Leto izida: | 2026 |
|---|
| Št. strani: | str. 1-28 |
|---|
| Številčenje: | Vol. 46, iss. 11, [article no.] 118317 |
|---|
| Izvor: | Nizozemska |
|---|
| PID: | 20.500.12556/DiRROS-29083  |
|---|
| UDK: | 620.1/.2 |
|---|
| ISSN pri članku: | 1873-619X |
|---|
| DOI: | 10.1016/j.jeurceramsoc.2026.118317 |
|---|
| COBISS.SI-ID: | 272220419 |
|---|
| Avtorske pravice: | © 2026 The Authors. |
|---|
| Opomba: | Nasl. z nasl. zaslona;
Soavtorji: Andreja Benčan, Silvo Drnovšek, Antonio Iacomini, Nejc Suban, Brigita Kmet, Uroš Prah, Tadej Rojac, Hana Uršič;
Opis vira z dne 19. 3. 2026;
|
|---|
| Datum objave v DiRROS: | 20.04.2026 |
|---|
| Število ogledov: | 121 |
|---|
| Število prenosov: | 72 |
|---|
| Metapodatki: |    |
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
