| Naslov: | Fire performance of thin intumescent coatings : material characterisation and application to mass timber structures |
|---|
| Avtorji: | ID Spyridakis, Stavros (Korespondenčni avtor) ID Wiesner, Felix (Avtor) ID Lucherini, Andrea (Avtor) ID Wu, Wenxuan (Avtor) ID Maluk, Cristian (Avtor) ID Orabi, Anwar (Avtor) |
| Datoteke: | URL - Izvorni URL, za dostop obiščite https://www.sciencedirect.com/science/article/pii/S0379711226000792
PDF - Predstavitvena datoteka, prenos (8,52 MB) MD5: F7912FBFB610FC3CFF768F41B56B8586
|
|---|
| Jezik: | Angleški jezik |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | ZAG - Zavod za gradbeništvo Slovenije
|
|---|
| Povzetek: | This study investigates the thermal behaviour of two opaque and one transparent thin intumescent coating at material level (coating only) and system level (coating applied at real scale on timber), and their effects on timber in fire. Micro-scale tests were conducted to examine the underlying mechanisms of intumescence and degradation for each coating individually, while bench-scale tests demonstrated how these behaviours translate to larger scales. Critical temperature and heat flux thresholds were identified at which the coatings begin to insulate the timber through the formation of the intumescent char layer, as well as those marking degradation of the layer and the reduction of its insulating efficacy. The findings highlight that coating type and thickness, heating conditions and exposure duration influence mass retention, swelling pattern, and the integrity of the intumescent char layer. Overall, the transparent coating exhibited lower durability than the opaque ones. It was also shown that, due to the similar temperature ranges of timber pyrolysis and coating swelling, timber degradation occurs close to the coated surface during the transient swelling process, resulting in a heated region of 15- 20 mm with negligible mechanical properties by the end of swelling. Therefore, intumescent coatings provide insulation progressively rather than immediately. |
|---|
| Ključne besede: | mass timber, thin intumescent coatings, swelling, fire testing, charring, fire safety |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Datum objave: | 12.03.2026 |
|---|
| Založnik: | Elsevier |
|---|
| Leto izida: | 2026 |
|---|
| Št. strani: | str. 1-13 |
|---|
| Številčenje: | Vol. 162, [article no.] 104711 |
|---|
| PID: | 20.500.12556/DiRROS-28806  |
|---|
| UDK: | 62 |
|---|
| ISSN pri članku: | 1873-7226 |
|---|
| DOI: | 10.1016/j.firesaf.2026.104711  |
|---|
| COBISS.SI-ID: | 273029379  |
|---|
| Avtorske pravice: | © 2026 The Authors |
|---|
| Opomba: | This special issue is based on the selection of works presented at the 15th International Symposium on Fire Safety Science (IAFSS 2026);
|
|---|
| Datum objave v DiRROS: | 08.04.2026 |
|---|
| Število ogledov: | 129 |
|---|
| Število prenosov: | 111 |
|---|
| Metapodatki: |  |
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |