| Naslov: | Linear thermal expansion of ▫$0.5Ba(Zr_{0.2}Ti_{0.8})O_3-0.5(Ba_{0.7}Ca_{0.3})TiO_3$▫ bulk ceramic |
|---|
| Avtorji: | ID Konsago, Sabi William, Institut "Jožef Stefan" (Avtor) ID Debevec, Andrej, Institut "Jožef Stefan" (Avtor) ID Cilenšek, Jena, Institut "Jožef Stefan" (Avtor) ID Kmet, Brigita, Institut "Jožef Stefan" (Avtor) ID Malič, Barbara, Institut "Jožef Stefan" (Avtor) |
| Datoteke: | PDF - Predstavitvena datoteka, prenos (850,08 KB) MD5: 349F1DF99204B1E566A996C7719F4E96
|
|---|
| Jezik: | Angleški jezik |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | IJS - Institut Jožef Stefan
|
|---|
| Povzetek: | We report the linear thermal expansion coefficient of lead-free ferroelectric ceramic barium zirconate titanate - barium calcium titanate 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3 (BZT-BCT). The material was prepared by solid-state synthesis and consolidated by sintering at 1450 °C. BZT-BCT crystallizes in the perovskite phase. The microstructure of the ceramic with about 95 % relative density consists of about 10 mm-sized grains. The contact dilatometry of the ceramic specimen reveals the change of slope of the linear thermal expansion curve at 84 °C. This is in good agreement with the peak of the dielectric permittivity versus temperature at about 85 °C indicating the transition from the low-temperature polar ferroelectric phase to a high-temperature nonpolar phase or Curie temperature. The thermal expansion coefficients of the polar tetragonal and nonpolar cubic phases of BZT-BCT are 7.69×10-6 K-1 (40°C – 80°C) and 12.39×10-6 K-1 (100°C – 600°C), respectively. The thermal expansion data are among the material data needed in the design of thin- and thick-film structures for energy-harvesting and energy-storage applications. |
|---|
| Ključne besede: | lead-free, ferroelectric ceramic, linear thermal expansion |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 09.01.2024 |
|---|
| Datum sprejetja članka: | 13.02.2024 |
|---|
| Založnik: | Strokovno društvo za mikroelektroniko, elektronske sestavne dele in materiale |
|---|
| Leto izida: | 2023 |
|---|
| Št. strani: | str. 233-238 |
|---|
| Številčenje: | Vol. 53, no. 4 |
|---|
| Izvor: | Slovenija |
|---|
| PID: | 20.500.12556/DiRROS-25332  |
|---|
| UDK: | 620.1/.2 |
|---|
| ISSN pri članku: | 0352-9045 |
|---|
| DOI: | 10.33180/InfMIDEM2023.403  |
|---|
| COBISS.SI-ID: | 187559427  |
|---|
| Avtorske pravice: | Copyright © 2023 by the Authors. |
|---|
| Opomba: | Besedilo v angl.;
|
|---|
| Datum objave v DiRROS: | 16.01.2026 |
|---|
| Število ogledov: | 149 |
|---|
| Število prenosov: | 46 |
|---|
| Metapodatki: |  |
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |