| Naslov: | Heat treatment optimisation of 18 % Ni maraging steel produced by DED-ARC for enhancing mechanical properties |
|---|
| Avtorji: | ID Lindič, Maja (Avtor)
ID Klobčar, Damjan (Avtor)
ID Nagode, Aleš (Avtor)
ID Mole, Nikolaj (Avtor)
ID Žužek, Borut (Avtor)
ID Vuherer, Tomaž (Avtor) |
|---|
| Datoteke: |  PDF - Predstavitvena datoteka, prenos (22,02 MB)
MD5: BFD3B321950A21850974C4280D182A48
 URL - Izvorni URL, za dostop obiščite https://www.sciencedirect.com/science/article/pii/S2666330925000330
|
|---|
| Jezik: | Angleški jezik |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: |  IMT - Inštitut za kovinske materiale in tehnologije
|
|---|
| Povzetek: | This article deals with the Directed Energy Deposition using Wire and Arc (DED-ARC) for maraging steel cladding. A technology for cladding using Gas Metal Arc Welding (GMAW) has been developed that enables the perfect deposition of maraging steel. The material characterisation was carried out in different material states: in the as-built, solution annealed and aged. The research included visual examinations, optical microscopy, Scanning Electron Microscopy / Energy-dispersive X-ray spectroscopy (SEM/EDS), fractography, hardness testing, tensile testing and impact toughness testing. The as-deposited state exhibited a microstructure with very long crystal grains and microsegregations orientated the direction of the heat sink, consisting of lath martensite. Consequently, a subsequent heat treatment is absolutely necessary in order to obtain a uniform fine-grained microstructure. Two different solution annealing processes were analysed, which allowed us to select the most suitable process for the first step of heat treatment followed by aging. A response surface methodology was used to optimise the aging conditions. The results show that additively manufactured maraging steel reaches a tensile strength of 1947 MPa, a hardness of 657 HV5 and a Charpy impact toughness of 11 J at peak aging condition, which is comparable to conventionally manufactured maraging steel. |
|---|
| Ključne besede: | maraging steel, heat treatment, material properties optimisation, DED-ARC, GMAW, RSM |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Datum objave: | 01.06.2025 |
|---|
| Založnik: | Elsevier |
|---|
| Leto izida: | 2025 |
|---|
| Št. strani: | str. 1-12 |
|---|
| Številčenje: | Vol. 11, 100312 |
|---|
| Izvor: | Nizozemska |
|---|
| PID: | 20.500.12556/DiRROS-24583  |
|---|
| UDK: | 621.791.75:669.14 |
|---|
| ISSN pri članku: | 2666-3309 |
|---|
| DOI: | 10.1016/j.jajp.2025.100312 |
|---|
| COBISS.SI-ID: | 237223939 |
|---|
| Avtorske pravice: | © 2025 The Author(s). Published by Elsevier B.V. |
|---|
| Opomba: | Nasl. z nasl. zaslona;
Opis vira z dne 26. 5. 2025;
Soavtorji: Damjan Klobčar, Aleš Nagode, Nikolaj Mole, Borut Žužek, Tomaž Vuherer;
|
|---|
| Datum objave v DiRROS: | 08.12.2025 |
|---|
| Število ogledov: | 69 |
|---|
| Število prenosov: | 41 |
|---|
| Metapodatki: |    |
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
