| Naslov: | Dataset for the article Comparing methods for determining the CO2 content in CO2-Sequestering materials and natural rock |
|---|
| Avtorji: | ID Tominc, Sara, Zavod za gradbeništvo Slovenije (Avtor)
ID Kavčič, Nika, Zavod za gradbeništvo Slovenije (Avtor)
ID Žibret, Lea, Zavod za gradbeništvo Slovenije (Avtor)
ID Žibret, Gorazd, Geološki zavod Slovenije (Avtor)
ID Kolar, Mitja, Fakulteta za kemijo in kemijsko tehnologijo, Univerza v Ljubljani (Avtor)
ID Ducman, Vilma, Zavod za gradbeništvo Slovenije (Avtor) |
|---|
| Datoteke: |  XLSX - Raziskovalni podatki, prenos (551,68 KB)
MD5: 340355E949B84C7E2E1F9FEA0385F053
Opis: This dataset contains the original X-ray fluorescence measurements for all samples before carbonation treatment. Two measurements were made for each sample and the mean values and standard deviations were calculated for each oxide. The data are linked to Table 2 in the article.
The dataset contains the original masses of the samples before and during the carbonation treatment (after 7, 10 and 14 days and additionally after 16, 20, 26 and 28 days for the gravimetric analysis). It contains the calcimetric measurements of each sample before (labeled »as received«) and after CO2 treatment (after 7 and 14 days), as well as the masses of standard CaCO3 and the measured pressure (in psi) used to generate the calibration curve. The CaCO3 content in the sample was calculated based on the pressure difference after 30 seconds of reaction and for the dolomite after 40 minutes of reaction. The dataset also contains the original results of the TG analysis of all samples after 14 days of CO2 exposure using TA Universal Analysis 2000 v.4.5A software, as well as all masses and calculations for gravimetry. The data are linked to Table 3-6 and Figures 3 and 4.
The dataset contains calculations of the measurement uncertainty for the calcimetric, gravimetric and TG analysis. Type A measurement uncertaintiy (uA) was calculated based on the standard deviation of precision (sA), which is the standard deviation of five measurement replicates for the same type of sample by the same operator. The type B measurement uncertainty (uB) was calculated based on the standard deviation of precision (sB), which is the absolute value of the difference between the theoretical CO2 content for each standard and the CO2 content with the largest deviation from the theoretical value. The combined uncertainty of measurement (uC) was calculated according to equation 5 in the article and the expanded uncertainty of measurement for a confidence interval of 95.5% (U95.5%) was calculated by multiplying the combined uncertainty of measurement (uC) by a factor of 2. The data are linked to Table 7 in the article.
XLSX - Raziskovalni podatki, prenos (4,57 MB)
MD5: EF98BD50C9A4A30A2B713A2505BE2F06
Opis: This dataset contains data from XRD analyzes using X'Pert Highscore plus 4 software, linked to Figures 1, 2 and 5 in the article. It also contains XRD analyzes with Rietveld refinement for a standard sample with 2, 5, 7 and 10 % CaCO3 (linked to subchapter 3.5. Measurement uncertainty) in the article.
|
|---|
| Jezik: | Angleški jezik |
|---|
| Tipologija: | 2.20 - Zaključena znanstvena zbirka raziskovalnih podatkov |
|---|
| Organizacija: |  ZAG - Zavod za gradbeništvo Slovenije
|
|---|
| Povzetek: | The dataset supports the data in the tables and figures of the scientific article Comparing methods for determining the CO2 content in CO2-Sequestering materials and natural rock (doi: https://doi.org/10.1016/j.ceramint.2025.07.109). It contains the calcimetric measurements, the original results of the XRF measurements and the original data of the TGA, gravimetric and XRD analyzes as well as the calculations of the measurement uncertainty for the calcimetric, gravimetric and TG analyzes. |
|---|
| Ključne besede: | sekvestracija CO2, pepel, žlindre, naravni kamen, TGA, kalcimetrija, merilna negotovost, CO2 sequestration, ash, slags, natural rocks, TGA, calcimetry, measurement uncertainty |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Datum objave: | 09.07.2025 |
|---|
| Kraj izida: | Ljubljana |
|---|
| Založnik: | Zavod za gradbeništvo Slovenije |
|---|
| Leto izida: | 2025 |
|---|
| Št. strani: | 1 spletni vir |
|---|
| PID: | 20.500.12556/DiRROS-22772  |
|---|
| COBISS.SI-ID: | 242465027 |
|---|
| Avtorske pravice: | © authors, 2025 |
|---|
| Metode zbir. podatkov: | Opazovanje: Laboratorij
Poskus: Laboratorij
Meritve in testi |
|---|
| Datum objave v DiRROS: | 24.06.2025 |
|---|
| Število ogledov: | 490 |
|---|
| Število prenosov: | 229 |
|---|
| Metapodatki: |    |
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
