| Naslov: | Lightweight aggregates made from fly ash using the cold-bond process and their use in lightweight concrete |
|---|
| Avtorji: | ID Frankovič, Ana (Avtor)
ID Bokan-Bosiljkov, Violeta (Avtor)
ID Ducman, Vilma (Avtor) |
|---|
| Datoteke: |  PDF - Predstavitvena datoteka, prenos (1,65 MB)
MD5: A6802ACCC3F6337DBBA304AD80DAB72C
 URL - Izvorni URL, za dostop obiščite https://doi.org/10.17222/mit.2015.337
|
|---|
| Jezik: | Angleški jezik |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: |  ZAG - Zavod za gradbeništvo Slovenije
|
|---|
| Povzetek: | Aggregates made from fly ash have been developed by means of the cold-bonding process, with the addition of Portland cement as a binder at (10, 20, and 30) % of mass fractions, and by pouring the mixtures into moulds. After curing for 28 d the samples were processed into aggregate by crushing and sieving. An aggregate containing a weight percentage of 10 % of cement was additionally produced by pelletization on a granulating plate. The density, water-adsorption capacity, porosity, compressive strengths, and frost resistance of the samples were determined. The aggregates prepared by both routes were then used to make concrete samples, whose properties were then compared to those of conventional concrete made using limestone aggregate. The compressive strength of the concrete made with the granulated aggregate reached 16.0 MPa after 28 d, whereas that of the concrete made with crushed aggregate amounted to 24.1 MPa, and that of the conventional concrete was 34.6 MPa. |
|---|
| Ključne besede: | fly ash, lightweight aggregates, density, compressive strength, frost resistance |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Datum objave: | 19.04.2017 |
|---|
| Založnik: | Inštitut za kovinske materiale in tehnologije |
|---|
| Leto izida: | 2017 |
|---|
| Št. strani: | str. 267-274 |
|---|
| Številčenje: | Letn. 51, št. 2 |
|---|
| PID: | 20.500.12556/DiRROS-20211  |
|---|
| UDK: | 67.017:666.96:620.173 |
|---|
| ISSN pri članku: | 1580-2949 |
|---|
| DOI: | 10.17222/mit.2015.337 |
|---|
| COBISS.SI-ID: | 8049505 |
|---|
| Avtorske pravice: | © MATERIALI IN TEHNOLOGIJE |
|---|
| Datum objave v DiRROS: | 14.08.2024 |
|---|
| Število ogledov: | 357 |
|---|
| Število prenosov: | 254 |
|---|
| Metapodatki: |    |
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
