| Naslov: | An evaluation of marine sediments in terms of their usability in the brick industry : case study Port of Koper |
|---|
| Avtorji: | ID Baksa, Patrik (Avtor)
ID Cepak, Franka (Avtor)
ID Kovačič Lukman, Rebeka (Avtor)
ID Ducman, Vilma (Avtor) |
|---|
| Datoteke: |  URL - Izvorni URL, za dostop obiščite http://dx.doi.org/10.13044/j.sdewes.d5.0183
 PDF - Predstavitvena datoteka, prenos (448,54 KB)
MD5: AC6516EBF26D0A075F87E5BBDBBCFE91
|
|---|
| Jezik: | Angleški jezik |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: |  ZAG - Zavod za gradbeništvo Slovenije
|
|---|
| Povzetek: | A dredging process is essential for the development of harbours and ports, allowing the functional daily operation of the port. The management of dredged material represents a worldwide challenge, especially considering unwanted deposition of material. Because of their chemical, petrographic, mineralogical and homogeneity composition, marine sediments could represent an appropriate raw material for the brick industry, particularly for the production of clay blocks, roofing and ceramic tiles. In this study dredged material from Port of Koper was tested for such use, thus various analyses were carried out in order to determine if the dredged material is environmentally friendly and suitable for use in the brick industry. These included: chemical analysis, mineralogical analysis, particle size analysis, chloride content analysis and tests of firing in a gradient furnace. Furthermore, tests of mechanical properties, as well as tests of the frost-resistance of the samples were carried out. On the basis of the primary analyses and samples prepared in a laboratory, it was confirmed that marine sediments from the Port of Koper, without any additives are only conditionally suitable as a source material for producing brick products, because without additives they exhibit too much shrinkage on drying and firing, as well as high water absorption, this can be improved by the incorporation of suitable additives, for example, virgin clay or other suitable waste material. The approach described herewith can also be followed to assess sediments from other ports and rivers regarding its potential use in clay brick sector. |
|---|
| Ključne besede: | dredge marine sediment, recycling, clay bricks, mechanical properties, chemical analysis |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Založnik: | SDEWES Centre |
|---|
| Leto izida: | 2018 |
|---|
| Št. strani: | str. 78-88 |
|---|
| Številčenje: | Vol. 6, iss. 1 |
|---|
| PID: | 20.500.12556/DiRROS-20210  |
|---|
| UDK: | 620.1/.2 |
|---|
| ISSN pri članku: | 1848-9257 |
|---|
| DOI: | 10.13044/j.sdewes.d5.0183 |
|---|
| COBISS.SI-ID: | 2323047 |
|---|
| Datum objave v DiRROS: | 14.08.2024 |
|---|
| Število ogledov: | 361 |
|---|
| Število prenosov: | 206 |
|---|
| Metapodatki: |    |
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
