| Naslov: | Efficiency of FRPU strengthening of a damaged masonry infill wall under in-plane cyclic shear loading and elevated temperatures |
|---|
| Avtorji: | ID Triller, Petra (Avtor)
ID Kwiecień, Konrad (Avtor)
ID Kwiecień, Arkadiusz (Avtor)
ID Bohinc, Uroš (Avtor)
ID Zając, BogusŁaw (Avtor)
ID Tekieli, Marcin (Avtor)
ID Szumera, Magdalena (Avtor)
ID Rousakis, Theodoros (Avtor)
ID Vanian, Vachan (Avtor)
ID Akyildiz, Ahmet Tugrul (Avtor)
ID Viskovic, Alberto (Avtor) |
|---|
| Datoteke: |  URL - Izvorni URL, za dostop obiščite https://www.sciencedirect.com/science/article/pii/S0141029624012148
 PDF - Predstavitvena datoteka, prenos (21,68 MB)
MD5: 9AA0F5CD2A8DBFAAC2192BA4461988B4
|
|---|
| Jezik: | Angleški jezik |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: |  ZAG - Zavod za gradbeništvo Slovenije
|
|---|
| Povzetek: | This paper presents results of in-plane shear tests carried out at the ZAG laboratory in Ljubljana (Slovenia) on a RC frame with masonry infill made of clay blocks (KEBE OrthoBlock). The frame was loaded with constant vertical loads at the top of the columns and then by gradually increasing horizontal cyclic loads at the top beam level. Acquired forces and measured displacements allowed capturing hysteretic behavior for determination of dissipation energy. In addition, two Digital Image Correlation (DIC) systems, Aramis and the CivEng Vision, were used to visualize the behavior of the tested specimens, with an emphasis on computing locally required information about the behavior of highly deformable interfaces. Three types of specimens were tested in-plane: the reference specimen in form of plain RC frame, the reference specimen with constructed masonry infill without any strengthening and the specimen, previously damaged and then strengthened on both sides using glass mesh bonded to the infill and the RC frame using flexible adhesive made of polyurethane matrix (Glass Fiber Reinforced PolyUrethane - GFRPU system). The strengthening process, allowed the specimen to withstand additional cyclic loads, reaching a maximum drift of 3.6 % without serious damage disqualifying the structure from further exploitation. The GFRPU strengthening system was found to be highly effective in preventing infill collapse of damaged masonry infill wall during in-plane loading. Additionally, the results of extended thermal analysis of PU are presented as polymers are, in general, a material, poorly resistant to heat. However, the analyzed PU manifested stable properties up to 200 degrees Celsius, which makes this material promising in civil engineering applications at elevated temperatures. |
|---|
| Ključne besede: | masonry blocks, damaged infill, fiber Reinforced PolyUrethane, external composite strengthening, in-plane shear, thermal tests, DIC measurements |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Datum objave: | 29.07.2024 |
|---|
| Založnik: | Elsevier |
|---|
| Leto izida: | 2024 |
|---|
| Št. strani: | str. 1-17 |
|---|
| Številčenje: | Vol. 317, [article no.] 118652 |
|---|
| PID: | 20.500.12556/DiRROS-20204  |
|---|
| UDK: | 624 |
|---|
| ISSN pri članku: | 1873-7323 |
|---|
| DOI: | 10.1016/j.engstruct.2024.118652 |
|---|
| COBISS.SI-ID: | 204091651 |
|---|
| Avtorske pravice: | © 2024 The Author(s). |
|---|
| Datum objave v DiRROS: | 14.08.2024 |
|---|
| Število ogledov: | 5 |
|---|
| Število prenosov: | 2 |
|---|
| Metapodatki: |     |
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
