| Naslov: | The influence of different fibres quantity on mechanical and microstructural properties of alkali-activated foams |
|---|
| Avtorji: | ID Traven, Katja (Avtor)
ID Češnovar, Mark (Avtor)
ID Horvat, Barbara (Avtor)
ID Ducman, Vilma (Avtor) |
|---|
| Datoteke: |  PDF - Predstavitvena datoteka, prenos (4,05 MB)
MD5: 069599B83E22B0C3D206195D63637E24
 URL - Izvorni URL, za dostop obiščite http://dx.doi.org/10.18690/um.fkkt.2.2022.9
|
|---|
| Jezik: | Angleški jezik |
|---|
| Tipologija: | 1.08 - Objavljeni znanstveni prispevek na konferenci |
|---|
| Organizacija: |  ZAG - Zavod za gradbeništvo Slovenije
|
|---|
| Povzetek: | Alkali activated foams (AAFs) were produced using electric arc furnace steel slag (EAF) and ladle furnace basic slag (LS), obtained from two metallurgical companies in Slovenia. They were activated with a mixture of sodium water glass (Na2SiO3) and solid NaOH and foamed with hydrogen peroxide (H2O2). Pores were stabilized with the addition of Triton as a surfactant. Four types of fibres were added to the studied mixture (polypropylene (PP), polyvinyl-alcohol (PVA), basalt (B), and glass wool (GW)) in five different quantities: 0.5, 1.0, 1.25, 1.5 and 2.0 vol % in order to additionally stabilize the structure and thus improve its mechanical properties. The results of mechanical properties showed, that compressive strength was increased in all 20 specimens, partially due to the increased density as well as to the fibre addition. Flexural strength on the other hand was the most improved in the samples where PP and PVA fibres were added. The samples with the addition of B and GW fibres on the other hand showed only small or no improvement in flexural strength in comparison to the referenced sample. Additionally, the microstructure of used fibres and selected foams was also investigated by the means of SEM analysis. |
|---|
| Ključne besede: | fibers, alkali activated foams, properties |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Datum objave: | 30.05.2022 |
|---|
| Založnik: | University of Maribor, University Press, Faculty of Chemistry and Chemical Engineering |
|---|
| Leto izida: | 2022 |
|---|
| Št. strani: | Str. 114-126 |
|---|
| PID: | 20.500.12556/DiRROS-18066  |
|---|
| UDK: | 620.1/.2 |
|---|
| DOI: | 10.18690/um.fkkt.2.2022.9 |
|---|
| COBISS.SI-ID: | 111157763 |
|---|
| Avtorske pravice: | © Authors & Potrč, Bogataj, Kravanja, Novak Pintarič, 2022 |
|---|
| Opomba: | Nasl. z nasl. zaslona;
Opis vira z dne 9. 6. 2022;
|
|---|
| Datum objave v DiRROS: | 31.01.2024 |
|---|
| Število ogledov: | 506 |
|---|
| Število prenosov: | 270 |
|---|
| Metapodatki: |    |
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
