Digitalni repozitorij raziskovalnih organizacij Slovenije

Izpis gradiva
A+ | A- | Pomoč | SLO | ENG

Naslov:Pilot production of façade panels : variability of mix design
Avtorji:ID Pavlin, Majda (Avtor)
ID Horvat, Barbara (Avtor)
ID Ducman, Vilma (Avtor)
Datoteke:URL URL - Izvorni URL, za dostop obiščite https://doi.org/10.18690/um.fkkt.1.2023
 
.pdf PDF - Predstavitvena datoteka, prenos (1000,34 KB)
MD5: 65E1559B03C8D8F6052385B033DF04C2
 
Jezik:Angleški jezik
Tipologija:1.08 - Objavljeni znanstveni prispevek na konferenci
Organizacija:Logo ZAG - Zavod za gradbeništvo Slovenije
Povzetek:As part of the WOOL2LOOP project, the Slovenian National Building and Civil Engineering Institute (ZAG), in collaboration with Termit d.d. were responsible for the production of façade panels. An initial mix design was developed at ZAG, where alkali-activated façade panels were produced, primarily from stone wool waste, while production took place at Termit. The mix design was changed twice during the pilot production, before a final product with suitable durability was developed. A compressive strength of up to 60 MPa and bending strength of approximately 20 MPa was achieved. The mechanical properties, however, varied, due to the unevenly milled batches of the milled mineral wool. Milling on a larger scale is very challenging, and it is difficult to obtain consistent quality of the milled material. Once the correct curing process had been found, however, the panels produced showed good performance. Moreover, the results from leaching tests showed that the elevated concentrations of certain elements (Cr, As and Mo) did not exceed the legal limits for non- hazardous waste.
Ključne besede:waste mineral wool, alkali activated material, façade panels, pilot production, circular economy
Status publikacije:Objavljeno
Verzija publikacije:Objavljena publikacija
Datum objave:30.01.2023
Založnik:University of Maribor, University Press, Faculty of Chemistry and Chemical Engineering
Leto izida:2023
Št. strani:Str. 25-43
PID:20.500.12556/DiRROS-17381 Novo okno
UDK:620.1/.2
COBISS.SI-ID:140435971 Novo okno
Avtorske pravice:© Authors & Potrč, Bogataj, Kravanja, Novak Pintarič, 2023
Opomba:Nasl. z nasl. zaslona; Opis vira z dne 2. 2. 2023;
Datum objave v DiRROS:28.11.2023
Število ogledov:604
Število prenosov:301
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
  
Objavi na:Bookmark and Share


Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše podrobnosti ali sproži prenos.

Gradivo je del monografije

Naslov:5th International Conference on Technologies & Business Models for Circular Economy : conference proceedings
Uredniki:Sanja Potrč, Miloš Bogataj, Zdravko Kravanja, Zorka Novak-Pintarič
Kraj izida:Maribor
Založnik:University of Maribor, University Press, Faculty of Chemistry and Chemical Engineering
Leto izida:2023
ISBN:978-961-286-692-1
COBISS.SI-ID:139091459 Novo okno

Gradivo je financirano iz projekta

Financer:EC - European Commission
Program financ.:H2020
Številka projekta:821000
Naslov:Mineral wool waste back to loop with advanced sorting, pre-treatment, and alkali activation
Akronim:WOOL2LOOP

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:Z2-3199
Naslov:Imobilizacija in izluževanje škodljivih elementov v sledovih iz alkalijsko aktiviranih materialov pripravljenih iz lokalno pridobljenih odpadnih in stranskih produktov

Licence

Licenca:CC BY-NC-ND 4.0, Creative Commons Priznanje avtorstva-Nekomercialno-Brez predelav 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by-nc-nd/4.0/deed.sl
Opis:Najbolj omejujoča licenca Creative Commons. Uporabniki lahko prenesejo in delijo delo v nekomercialne namene in ga ne smejo uporabiti za nobene druge namene.

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:odpadna mineralna volna, alkalijsko aktivirani materiali, fasadne plošče, pilotna proizvodnja, krožna ekonomija


Nazaj