Naslov: | Loss of oxygen atoms on well-oxidized cobalt by heterogeneous surface recombination |
---|
Avtorji: | ID Paul, Domen, Institut Jožef Stefan (Avtor) ID Mozetič, Miran, Institut Jožef Stefan (Avtor) ID Zaplotnik, Rok, Institut Jožef Stefan (Avtor) ID Ekar, Jernej, Institut Jožef Stefan (Avtor) ID Vesel, Alenka, Institut Jožef Stefan (Avtor) ID Primc, Gregor, Institut Jožef Stefan (Avtor) ID Đonlagić, Denis (Avtor) |
Datoteke: | URL - Izvorni URL, za dostop obiščite https://www.mdpi.com/1996-1944/16/17/5806
PDF - Predstavitvena datoteka, prenos (3,59 MB) MD5: 58F44125BE18426EC22333D91226ADC2
|
---|
Jezik: | Angleški jezik |
---|
Tipologija: | 1.01 - Izvirni znanstveni članek |
---|
Organizacija: | IJS - Institut Jožef Stefan
|
---|
Povzetek: | Calorimetry is a commonly used method in plasma characterization, but the accuracy of the method is tied to the accuracy of the recombination coefficient, which in turn depends on a number of surface effects. Surface effects also govern the kinetics in advanced methods such as atomic layer oxidation of inorganic materials and functionalization of organic materials. The flux of the reactive oxygen atoms for the controlled oxidation of such materials depends on the recombination coefficient of materials placed into the reaction chamber, which in turn depends on the surface morphology, temperature, and pressure in the processing chamber. The recombination coefficient of a well-oxidized cobalt surface was studied systematically in a range of temperatures from 300 to 800 K and pressures from 40 to 200 Pa. The coefficient increased monotonously with decreasing pressure and increasing temperature. The lowest value was about 0.05, and the highest was about 0.30. These values were measured for cobalt foils previously oxidized with oxygen plasma at the temperature of 1300 K. The oxidation caused a rich morphology with an average roughness as deduced from atomic force images of 0.9 µm. The results were compared with literature data, and the discrepancy between results reported by different authors was explained by taking into account the peculiarities of their experimental conditions. |
---|
Status objave pri reviji: | Objavljeno |
---|
Verzija članka: | Založnikova različica članka |
---|
Poslano v recenzijo: | 03.08.2023 |
---|
Datum sprejetja članka: | 23.08.2023 |
---|
Datum objave: | 24.08.2023 |
---|
Založnik: | MDPI |
---|
Leto izida: | 2023 |
---|
Št. strani: | 1-14 str. |
---|
Številčenje: | Vol. 16, iss. 17 |
---|
Izvor: | Švica |
---|
PID: | 20.500.12556/DiRROS-16841  |
---|
UDK: | 66.01 |
---|
ISSN pri članku: | 1996-1944 |
---|
DOI: | doi.org/10.3390/ma16175806  |
---|
COBISS.SI-ID: | 162250755  |
---|
Avtorske pravice: | © 2023 by the authors |
---|
Opomba: | Nasl. z nasl. zaslona;
Opis vira z dne 25. 8. 2023;
|
---|
Datum objave v DiRROS: | 25.08.2023 |
---|
Število ogledov: | 71 |
---|
Število prenosov: | 25 |
---|
Metapodatki: |  |
---|
:
|
Kopiraj citat |
---|
| | | Objavi na: |  |
---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |