| Naslov: | Influence of the calcination duration of ▫$g-C_3N_4/TiO_2$▫ veggie-toast-like photocatalyst on the visible-light triggered photocatalytic oxidation of bisphenol A |
|---|
| Avtorji: | ID Roškarič, Matevž (Avtor)
ID Žerjav, Gregor (Avtor)
ID Finšgar, Matjaž (Avtor)
ID Zavašnik, Janez (Avtor)
ID Pintar, Albin (Avtor) |
|---|
| Datoteke: |  URL - Izvorni URL, za dostop obiščite https://www.sciencedirect.com/science/article/pii/S0925838823008885?via%3Dihub
 PDF - Predstavitvena datoteka, prenos (3,13 MB)
MD5: 5D541D9B397BCB45035B9514A6D1ED0F
|
|---|
| Jezik: | Angleški jezik |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: |  KI - Kemijski inštitut
 IJS - Institut Jožef Stefan
|
|---|
| Povzetek: | Two commercially available TiO2 (hexagonal-like and spherical-like particles) were used to investigate the effect of g-C3N4 “melting” on the photocatalytic properties of g-C3N4/TiO2 composites. Improvement in the contact between the components was observed when they were thermally treated at 350 °C for an extended period of time (between 2 and 72 h) due to the partial melting and phase fusion of g-C3N4. Consequently, the enhanced contact between the phases allows easier injection of photogenerated electrons from the conduction band of g-C3N4 into TiO2, improving charge carrier separation. The prepared composites were tested for bisphenol A degradation under visible-light illumination, which showed that the components that had been calcined for 24 h performed better due to the improved charge carrier separation. Superoxide anionic radicals and photogenerated holes were identified as active species in the photooxidation experiments conducted under visible-light illumination. |
|---|
| Ključne besede: | titanium dioxide, photocatalyst, calcination time, photocatalysis under visible-light illumination, water remediation, bisphenol A |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Datum objave: | 25.06.2023 |
|---|
| Založnik: | Elsevier Science |
|---|
| Leto izida: | 2023 |
|---|
| Št. strani: | str. 1-16 |
|---|
| Številčenje: | Vol. 947, article no. 169585 |
|---|
| Izvor: | Journal of alloys and compounds |
|---|
| PID: | 20.500.12556/DiRROS-16374  |
|---|
| UDK: | 544.5/.6 |
|---|
| ISSN pri članku: | 1873-4669 |
|---|
| DOI: | 10.1016/j.jallcom.2023.169585 |
|---|
| COBISS.SI-ID: | 144950275 |
|---|
| Avtorske pravice: | © 2023 The Author(s). Published by Elsevier B.V. |
|---|
| Opomba: | Nasl. z nasl. zaslona;
Soavtorji: Gregor Žerjav, Matjaž Finšgar, Janez Zavašnik, Albin Pintar;
Opis vira z dne 13. 3. 2023;
|
|---|
| Datum objave v DiRROS: | 17.03.2023 |
|---|
| Število ogledov: | 1079 |
|---|
| Število prenosov: | 476 |
|---|
| Metapodatki: |    |
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
