| Naslov: | Differences between 3-D printed and traditionally milled CoCr dental alloy from casted block in oral environment |
|---|
| Avtorji: | ID Bajt Leban, Mirjam (Avtor)
ID Kurnik, Matej (Avtor)
ID Kopač, Igor (Avtor)
ID Klug Jovičević, Matic (Avtor)
ID Podgornik, Bojan (Avtor)
ID Kosec, Tadeja (Avtor) |
|---|
| Datoteke: |  URL - Izvorni URL, za dostop obiščite https://www.sciencedirect.com/science/article/pii/S0013468623002530
 PDF - Predstavitvena datoteka, prenos (9,28 MB)
MD5: 2C1555FA42D3BE3C83EFEEC4DD714487
 DOCX - Priloga, prenos (18,19 KB)
MD5: 90123C98A98E2C306FAEB1077420EC0D
|
|---|
| Jezik: | Angleški jezik |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: |  ZAG - Zavod za gradbeništvo Slovenije
 IMT - Inštitut za kovinske materiale in tehnologije
|
|---|
| Povzetek: | The aim of this study was to compare corrosion resistance and ion release in CoCr dental alloys with identical chemical compositions produced using different technologies (SLM – selective laser melting and milling from cast blocks) and heat treatment (SLM parts only). The corrosion properties were tested in artificial saliva, artificial saliva with fluoride ions, and artificial saliva with added lactic acid to simulate inflammations. The study included electrochemical tests, microstructural investigation and ion release tests in the three different environments for a total of 42 days. The best performance of CoCr as a result of potentiodynamic polarization was observed in the artificial saliva with added lactic acid, which is in contradiction with the highest ion release measured from all the materials tested and electrochemical impedance spectroscopy that showed a deterioration of the passive layer in an acidic environment. Microstructural investigation revealed that different phases precipitated by heat treatment trigger increased release of Mo and W ions. The printing method does not raise critically ion release from CoCr alloy, while the state of the surface greatly impacts the extent of the ion release. This study demonstrates the importance of an interdisciplinary approach to the study of corrosion and biocompatibility in dental alloys. |
|---|
| Ključne besede: | CoCr dental alloy, selective laser melting, corrosion, ion release, artificial saliva |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Datum objave: | 19.02.2023 |
|---|
| Založnik: | Elsevier |
|---|
| Leto izida: | 2023 |
|---|
| Št. strani: | str. 1-11 |
|---|
| Številčenje: | [article no. 142066] |
|---|
| PID: | 20.500.12556/DiRROS-16322  |
|---|
| UDK: | 616.31 |
|---|
| ISSN pri članku: | 1873-3859 |
|---|
| DOI: | 10.1016/j.electacta.2023.142066 |
|---|
| COBISS.SI-ID: | 142379779 |
|---|
| Avtorske pravice: | © 2023 The Author(s). Published by Elsevier Ltd. |
|---|
| Datum objave v DiRROS: | 29.05.2023 |
|---|
| Število ogledov: | 340 |
|---|
| Število prenosov: | 287 |
|---|
| Metapodatki: |     |
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
