| Naslov: | Investigation of surface treatment effects on the environmentally-assisted cracking behaviour of Alloy 182 in boiling water reactor environment |
|---|
| Avtorji: | ID Que, Zaiqing (Avtor)
ID Zajec, Bojan (Avtor)
ID Ritter, Stefan (Avtor)
ID Seppänen, Tommi (Avtor)
ID Saario, Timo (Avtor)
ID Toivonen, Aki (Avtor)
ID Treichel, Aleksandra (Avtor)
ID Lautaru, Valentin (Avtor)
ID Scenini, Fabio (Avtor) |
|---|
| Datoteke: |  PDF - Predstavitvena datoteka, prenos (4,12 MB)
MD5: 59D720D0A913AEE702273B6A0C8161C9
 URL - Izvorni URL, za dostop obiščite https://www.tandfonline.com/doi/full/10.1080/1478422X.2022.2083746
|
|---|
| Jezik: | Angleški jezik |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: |  ZAG - Zavod za gradbeništvo Slovenije
|
|---|
| Povzetek: | Surface treatments of primary circuit components in light water reactors are regarded as possible ways to mitigate environmentally-assisted cracking (EAC). To date, it is not fully conclusive which surface condition is suitable to reduce the EAC initiation susceptibility. Constant extension rate tensile (CERT) tests were performed by several labs using flat tapered tensile specimens with different surface conditions (ground, industrial face milled, advanced face milled and shot peened), exposed to a boiling water reactor normal water chemistry environment at 288°C. Despite some scatter in the results, the CERT tests revealed that the EAC initiation susceptibility seems lowest for the advanced face milled surface and highest for the shot peened surface. However, it must be emphasised that the differences were moderate and that the surprising behaviour of the shot peened surface can be explained. The mechanical grinding of the surface did not significantly retard EAC initiation compared to industrial face milling. |
|---|
| Ključne besede: | crack initiation, environmentally-assisted cracking, Alloy 182, surface machining, boiling water reactor, open access |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Datum objave: | 09.06.2022 |
|---|
| Založnik: | Maney on behalf of the Institute of Materials, Minerals and Mining |
|---|
| Leto izida: | 2022 |
|---|
| Št. strani: | str. 474-485 |
|---|
| Številčenje: | Vol. 57, no. 5 |
|---|
| PID: | 20.500.12556/DiRROS-15843  |
|---|
| UDK: | 54 |
|---|
| ISSN pri članku: | 1478-422X |
|---|
| DOI: | 10.1080/1478422X.2022.2083746 |
|---|
| COBISS.SI-ID: | 123445251 |
|---|
| Avtorske pravice: | © 2022 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group |
|---|
| Datum objave v DiRROS: | 05.05.2023 |
|---|
| Število ogledov: | 364 |
|---|
| Število prenosov: | 152 |
|---|
| Metapodatki: |     |
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
