11. Degradation and Stabilization of Polymer MaterialsBranka Mušič, Andrijana Sever Škapin, 2023, kratki znanstveni prispevek Ključne besede: polymer-based materials, nano, micro, and macro composites, effects on (micro) organisms and toxicity, impact on the ecosystem, mechanisms and products of accelerated aging and degradation, physical, chemical, mechanical, thermal, and morphological, analysis, biodegradability, sustainability, life cycle, renewable and recycled resources and the circular economy
Objavljeno v DiRROS: 21.12.2023; Ogledov: 254; Prenosov: 90
 Celotno besedilo (226,05 KB)
Gradivo ima več datotek! Več... |
12. Detoxified spent pot lining from aluminum production as (alumino-)silicate source for composite cement and autoclaved aerated concreteArne Peys, Mateja Košir, Ruben Snellings, Ana Mladenovič, Liesbeth Horckmans, 2021, izvirni znanstveni članek Povzetek: New sources of supplementary cementitious materials (SCMs) are needed to meet the future demand. A potential new source of SCM is spent pot lining, a residue from aluminum production. The present work showed that the refined aluminosilicate part of spent pot lining (SPL) has a moderate chemical reactivity in a cementitious system measured in the R3 calorimetry test, comparable to commercially used coal fly ash. The reaction of SPL led to the consumption of Ca(OH)2 in a cement paste beyond 7 days after mixing. At 28 and 90 days a significant contribution to strength development was therefore observed, reaching a relative strength, which is similar to composite cements with coal fly ash. At early age a retardation of the cement hydration is caused by the SPL, which should most likely be associated with the presence of trace amounts of NH3. The spent pot lining is also investigated as silica source for autoclaved aerated concrete blocks. The replacement of quartz by spent pot lining did not show an adverse effect on the strength-density relation of the lightweight blocks up to 50 wt% quartz substitution. Overall, spent pot lining can be used in small replacement volumes (30 wt%) as SCM or as replacement of quartz (50 wt%) in autoclaved aerated concrete blocks.
Ključne besede: spent pot lining, construction materials, recycling, autoclaved aerated conctrte, supplementary cementitious material
Objavljeno v DiRROS: 04.12.2023; Ogledov: 196; Prenosov: 85
Celotno besedilo (15,66 MB)
Gradivo ima več datotek! Več... |
13. The importance of educating younger generations about raw materials and their uses in our daily lifeKim Mezga, Petra Vrhovnik, Janja Žmavc, Lidia Gullon, 2021, izvirni znanstveni članek Povzetek: Raw materials are of great importance for humankind as they enable the development of technology, drive industry and economy, and overall the lifestyle we know today. The paper is addressing the topic of interactive learning about the mineral raw materials, i.e. metals and non-metals. Due to population growth and consequently in-creased global demand for raw materials, there is a need to educate younger generations about the raw materials and their properties and origin, so they would know from an early age where the mineral products they use come from and how purchase decisions affect the social environments of people who live in countries with resources exploitation.Todayʼs trends in mining are oriented towards more sustainable exploitation and management, taking into account the economic, social and environmental aspects. An example of such is exploitation of secondary raw materials from tail-ings and heaps. But in some countries, mining is stuck in the past, using obsolete technologies causing increased pol-lution and strongly present linear economy approaches of take-use-dispose attitudes or even unethical approaches, such as children being exploited as a cheap workforce, people being abducted, tortured and even killed over minerals (min-erals being exploited in such way are called blood or conflict minerals). Further, due to the potential negative impacts on health and safety, due to the emissions in air, water and surface disturbance, the public perception of mining is still perceived as negative in most cases. School curriculums most often lack description of current situations in the global mining. Therefore, within the EIT RawMaterials BRIEFCASE and 3D BRIEFCASE projects the project partners provide the comprehensive view of the issues of todayʼs mining and use of raw materials. The paper presents the description of both projects and the non-conventional teaching methods - the hands-on and digital tools for pupils and teachers, i.e. the briefcases, the "Briefcase of mineral applications" game, workshops and the supporting materials. The main objective of projects is to raise the pupils awareness about the utility and indispensability of minerals and mining and the consequences of their uses and production systems, which would increasein the long term the awareness about the social and environmental consequences of raw material production.
Ključne besede: raw materials, mining, pupils and students, non-conventional teaching tools, BRIEFCASE, 3D BRIEFCASE, curricular planning, EIT RawMaterials
Objavljeno v DiRROS: 04.12.2023; Ogledov: 226; Prenosov: 104
Celotno besedilo (988,03 KB)
Gradivo ima več datotek! Več... |
14. Particle size manipulation as an influential parameter in the development of mechanical properties in electric arc furnace slag-based AAMKatja Traven, Mark Češnovar, Vilma Ducman, 2019, izvirni znanstveni članek Povzetek: Alkali-activated materials (AAM) have gained recognition as a promising alternative to technical ceramic and building materials owing to the lower energy demands for production and the potential to use slag as a precursor. In the present study, five sets of slag-based AAM pastes were prepared with different particle sizes (fractions d < 63, 63 < d < 90, and 90 < d < 125 μm in different mass ratios) under the same curing regime and using a fixed precursor to activator (water) mass ratio. Precursors and the hardened AAM are evaluated using BET, XRD, XRF, SEM, FTIR, reactivity of precursors by leaching, and mercury intrusion porosimetry (MIP). Chemical analysis indicated only marginal differences among the different-sized fractions of input materials, whereas the BET surface area and reactivity among the precursors differed significantly-smaller particles had the largest surface area, and thus, higher reactivity. The mineralogical differences between the precursors and hardened AAM were negligible. The results revealed that compressive strength was significantly influenced by particle size, i.e., a threefold increase in strength when the particle size was halved. Microstructural evaluation using MIP confirmed that the porosity was the lowest in AAM with the smallest particle size. The low porosity and high reactivity of the fine fractions led to the highest compressive strength, confirming that manipulation of particle size can significantly influence the mechanical properties.
Ključne besede: alkalijsko aktivirani materiali, žlindra iz obločne peči, mehanska aktivacija, mehanske lastnosti, poroznost, alkali-activated materials (AAM), electric arc furnace steel slag, mechanical activation, mechanical properties, porosity
Objavljeno v DiRROS: 22.11.2023; Ogledov: 254; Prenosov: 132
Celotno besedilo (2,26 MB)
Gradivo ima več datotek! Več... |
15. The corrosion properties of steel in pore solutions obtained from alkali‐activated mortarsNina Gartner, Tadeja Kosec, Stéphane Poyet, Andraž Legat, 2023, izvirni znanstveni članek Povzetek: Alkali‐activated materials (AAMs) are considered a promising alternative to materials made from ordinary Portland cement (OPC). Other than considering the durability of the material itself, the use of AAMs for reinforced concrete elements also raises the question of steel corrosion processes in these materials, which are still relatively unknown. Three different alkali‐activated mortars were prepared for this study, based on either fly ash, slag, or metakaolin. Pore solutions were then extracted from each mortar and chemically analyzed. Electrochemical techniques were used to study the corrosion of steel in synthetic pore solutions containing varying concentrations of chlorides. In parallel, the same corrosion tests were performed in a generic pore solution representing OPC mortar. It was shown that the chemical composition differed in each pore solution tested, thus affecting the corrosion properties of the steel. The addition of chloride also had a varying effect on the corrosion properties of the steel in each type of pore solution tested. This study provided a basic overview of the corrosion behavior and mechanisms of the various AAM environments in comparison to that of OPC.
Ključne besede: alkali-aktivated materials, corrosion, electrochemical corrosion techniques, extracted pore solution
Objavljeno v DiRROS: 20.11.2023; Ogledov: 238; Prenosov: 36
Celotno besedilo (2,73 MB)
Gradivo ima več datotek! Več... |
16. Recovery of phosphorus and metals from the ash of sewage sludge, municipal solid waste, or wood biomass : a review and proposals for further useSara Tominc, Vilma Ducman, Wolfgang Wisniewski, Terttu Luukkonen, Kirkelund Gunvor M., Ottosen Lisbeth M., 2023, izvirni znanstveni članek Povzetek: This review provides an overview of methods to extract valuable resources from the ash fractions of sewage sludge, municipal solid waste, and wood biomass combustion. The resources addressed here include critical raw materials, such as phosphorus, base and precious metals, and rare earth elements for which it is increasingly important to tap into secondary sources in addition to the mining of primary raw materials. The extraction technologies prioritized in this review are based on recycled acids or excess renewable energy to achieve an optimum environmental profile for the extracted resources and provide benefits in the form of local industrial symbioses. The extraction methods cover all scarce and valuable chemical elements contained in the ashes above certain concentration limits. Another important part of this review is defining potential applications for the mineral residues remaining after extraction. Therefore, the aim of this review is to combine the knowledge of resource extraction technology from ashes with possible applications of mineral residues in construction and related sectors to fully close material cycle loops.
Ključne besede: critical raw materials, extraction, sewage sludge ash, municipal solid waste incineration ash, wood biomass ash
Objavljeno v DiRROS: 03.11.2023; Ogledov: 355; Prenosov: 128
Celotno besedilo (1,12 MB)
Gradivo ima več datotek! Več... |
17. Characterisation of 20th century cementitious materials from selected cultural heritage structures in SloveniaMateja Golež, Vesna Zalar Serjun, Mateja Štefančič, Darja Rant, Sabina Dolenec, 2023, izvirni znanstveni članek Povzetek: This paper deals with the characterisation of cementitious materials from selected cultural heritage structures in Slovenia. The mineralogical–petrographic compositions of an aggregate, a type of binder and secondary minerals were studied via electron microscopy and X-ray powder diffraction. The porosity and pore network were determined using a mercury porosimeter. The results show that the aggregate of the samples was highly diverse, ranging from limestone, dolomite, quartz, feldspar and mica. The binder of the investigated samples was cementitious; either ordinary Portland cement was used, or ordinary Portland cement blended with ground granulated blast furnace slag was used. Some samples consisted of cement–lime binders. The investigated examples entailing cement materials for their construction contribute to a better understanding of the technology used to prepare historical cementitious and cement–lime mixtures.
Ključne besede: 20th century, cementitious materials, historical concrete, cultural heritage
Objavljeno v DiRROS: 15.09.2023; Ogledov: 262; Prenosov: 169
Celotno besedilo (2,05 MB)
Gradivo ima več datotek! Več... |
18. RILEM TC 247-DTA round robin test : mix design and reproducibility of compressive strength of alkaliactivated concretesJohn L. Provis, Kamel Arbi, Susana Bernal, Dali Bondar, Anja Buchwald, Arnaud Castel, Sundararaman Chithiraputhiran, Martin Cyr, Alireza Dehghan, Katja Dombrowski-Daube, Ashish Dubey, Vilma Ducman, Gregor J. G. Gluth, Sreejith Nanukuttan, Karl Peterson, Francisca Puertas, Arie van Riessen, Manuel Torres-Carrasco, Guang Ye, Yibing Zuo, 2019, izvirni znanstveni članek Povzetek: The aim of RILEM TC 247-DTA Durability Testing of Alkali-Activated Materials is to identify and validate methodologies for testing the durability of alkali-activated concretes. To underpin the durability testing work of this committee, five alkali-activated concrete mixes were developed based on blast furnace slag, fly ash, and flash-calcined metakaolin. The concretes were designed with different intended performance levels, aiming to assess the capability of test methods to discriminate between concretes on this basis. A total of fifteen laboratories worldwide participated in this round robin test programme, where all concretes were produced with the same mix designs, from single-source aluminosilicate precursors and locally available aggregates. This paper reports the mix designs tested, and the compressive strength results obtained, including critical insight into reasons for the observed variability in strength within and between laboratories.
Ključne besede: alkali-activated materials (AAM), mechanical properties, test method, Rilem TC, durability
Objavljeno v DiRROS: 14.09.2023; Ogledov: 235; Prenosov: 138
Celotno besedilo (431,19 KB)
Gradivo ima več datotek! Več... |
19. Entering voltage hysteresis in phase-separating materials : revealing the electrochemical signature of the intraparticle phase-separated stateTomaž Katrašnik, Jože Moškon, Klemen Zelič, Igor Mele, Francisco Ruiz-Zepeda, Miran Gaberšček, 2023, izvirni znanstveni članek Povzetek: Hysteresis is a general phenomenon regularly observed in various materials. Usually, hysteretic behavior is an intrinsic property that cannot be circumvented in the non-equilibrium operation of the system. Herein, we show that, at least with regard to the hysteretic behavior of phase-separating battery materials, it is possible to enter (deeply) the hysteretic loop at finite battery currents. This newly observed electric response of the electrode, which is inherent to phase-separating materials, is, for the first time, related to its microscopic origin arising from a (significant) share of the active material residing in an intraparticle phase-separated state. This intriguing observation was further generalized by revealing that a phase-separating material can feature (significantly) different chemical potentials at the same bulk lithiation level and temperature when exposed to the same finite current and external voltage hysteresis. Therefore, the intraparticle phase-separated state significantly affected the DC and AC characteristics of the battery. The experimental evidence for entering the intraparticle phase-separated state is supported by thermodynamic reasoning and advanced modeling. The current findings will help advance the understanding, control, diagnostics, and monitoring of batteries composed of phase-separating materials while also providing pertinent motivation for the enhancement of battery design and performance.
Ključne besede: battery, phase-separating materials, Lithium iron phosphate, voltage hysteresis, intraparticle phase-separated
Objavljeno v DiRROS: 06.09.2023; Ogledov: 340; Prenosov: 164
Celotno besedilo (5,07 MB)
Gradivo ima več datotek! Več... |
20. Life cycle assessment of prefabricated geopolymeric façade cladding panels made from large fractions of recycled construction and demolition wasteDavor Kvočka, Anja Lešek, Friderik Knez, Vilma Ducman, Matteo Panizza, Constantinos Tsoutis, Adriana Bernardi, 2020, izvirni znanstveni članek Povzetek: The construction and demolition sector is one of the biggest consumers of natural resources in the world and consequently, one of the biggest waste producers worldwide. The proper management of construction and demolition waste (CDW) can provide major benefits for the construction and recycling industry. However, the recycling rate of CDW is relatively low, as there is still a lack of confidence in the quality of recycled CDW materials. Therefore, new research projects are looking for innovative solutions within recycling of CDW in order to overcome uncertainties currently associated with the use of construction products made from recycled or re-used CDW. In this paper, a “cradle-to-cradle” life cycle assessment (LCA) study has been conducted to investigate the environmental performance of the prefabricated geopolymeric façade cladding panels made from large fractions of CDW. The LCA results indicate that the majority of the environmental burden arises within the manufacturing stage; however, the environmental burden can be reduced with simple optimisation of the manufacturing process. Furthermore, the environmental impact of the prefabricated geopolymeric façade cladding panels is generally lower than the environmental burden associated with the façade cladding panels made from virgin materials.
Ključne besede: construction and demolition waste, alkali activated materials, geopolymers, LCA
Objavljeno v DiRROS: 24.08.2023; Ogledov: 246; Prenosov: 126
Celotno besedilo (2,03 MB)
Gradivo ima več datotek! Več... |
