1. Life cycle assessment of metal alloys for structural applicationsKatja Malovrh Rebec, Boštjan Markoli, Blaž Leskovar, 2018, objavljeni znanstveni prispevek na konferenci (vabljeno predavanje) Povzetek: The study compared environmental footprints of two types of Al-alloys: well-known 5083 aluminium alloy with magnesium and traces of manganese and chromium in its composition. This material is highly resistant to seawater corrosion and the influence of industrial chemicals. Furthermore, it retains exceptional strength after welding. The comparisons were made to an innovative alloy where the aluminium based matrix is reinforced by metastable quasicrystals (QC), thus avoiding magnesium in its composition. Furthermore, we checked other aluminium ingots' footprints and compared European average and Germany country specific production data. Environmental footprints were assessed via cradle to gate life cycle assessment. Our findings normalized to 1 m2 plate suggest, that newly proposed alloy could save around 50 % in value of parameters abiotic resources depletion of fossil fuels, acidification, eutrophication, global warming potential and photochemical ozone creation potential if we compare Qc5 to 6 mm 5083 alloy plate. Only abiotic resources depletion of elements and ozone depletion parameters increase for Qc5 compared to 6 mm 5083 alloy plate.
Ključne besede: environmental footprints, LCA, Al-alloys
Objavljeno v DiRROS: 05.04.2024; Ogledov: 83; Prenosov: 60
 Celotno besedilo (2,29 MB)
Gradivo ima več datotek! Več... |
2. Relevance of cold-rolling technology for the texture and anisotropy of EN AW-8011A aluminum alloysJakob Kraner, Kyung Il Kim, Bonghwan Kim, Shae K. Kim, Irena Paulin, 2023, izvirni znanstveni članek Ključne besede: aluminium alloys, cold rolling, SEM-EBSD, textures, anisotropy
Objavljeno v DiRROS: 08.03.2024; Ogledov: 122; Prenosov: 57
Celotno besedilo (2,04 MB)
Gradivo ima več datotek! Več... |
3. In vitro and in vivo degradation behavior of Mg-0.45Zn-0.45Ca (ZX00) screws for orthopedic applicationsDiana C. Martinez, Anna Dobkowska, Romy Marek, Hanna Ćwieka, Jakub Jaroszewicz, T. Plociński, Črtomir Donik, Heike Helmholz, Bérengère Luthringer-Feyerabend, Berit Zeller-Plumhoff, Regine Willumeit-Römer, Wojciech Święszkowski, 2023, izvirni znanstveni članek Ključne besede: magnesium alloys, biodegradable implants, microstructure, electron microscopy, corrosion layers
Objavljeno v DiRROS: 08.03.2024; Ogledov: 101; Prenosov: 102
Celotno besedilo (23,65 MB)
Gradivo ima več datotek! Več... |
4. In vitro evaluation of stress corrosion cracking susceptibility of PEO-coated rare-earth magnesium alloy WE43Julia Nachtsheim, Songyun Ma, Jaka Burja, Bernd Markert, 2024, izvirni znanstveni članek Ključne besede: stress corrosion cracking, PEO coating, biodegradable magnesium alloys, SCC test setup, in vitro experiments
Objavljeno v DiRROS: 07.02.2024; Ogledov: 164; Prenosov: 78
Celotno besedilo (16,00 MB)
Gradivo ima več datotek! Več... |
5. Influence of precipitation hardening on the mechanical properties of Co-Cr-Mo and Co-Cr-W-Mo dental alloysMarko Sedlaček, Katja Zupančič, Barbara Šetina, Borut Kosec, Matija Zorc, Aleš Nagode, 2023, izvirni znanstveni članek Ključne besede: Co-Cr alloys, microstructure analysis, hardness, wear resistance
Objavljeno v DiRROS: 01.02.2024; Ogledov: 192; Prenosov: 118
Celotno besedilo (53,05 MB)
Gradivo ima več datotek! Več... |
6. Estimation of the corrosion properties for titanium dental alloys produced by SLMTadeja Kosec, Mirjam Bajt Leban, Maja Ovsenik, Matej Kurnik, Igor Kopač, 2022, izvirni znanstveni članek Povzetek: Titanium alloys are known for their excellent biocompatible properties. The development of additive-manufacturing technologies has increased the interest in the use of Ti-6Al-4V, produced by selective laser melting (SLM) method, also in dentistry, i.e., prosthodontics and orthodontics. In the present paper, the effect of laser printing parameters in the selective laser melting (SLM) process on the porosity and corrosion behavior of Ti-6Al-4V dental alloy was metallographically and electrochemically studied. All the tests were performed in artificial saliva at 37 °C. Different forms of Ti-6Al-4V alloy were selected: a reference sample, i.e., pre-fabricated milling disc in wrought condition and four different 3D-printed samples made from Ti-6Al-4V powder using the SLM method, one being heat treated. Electrochemical, spectroscopic and hardness measurements were employed in the study. It was shown that the SLM-produced Ti-6Al-4V samples with different printing parameters have similar microstructural and electrochemical properties, while the electrochemical properties of a reference and thermally treated 3D-printed sample were different, most probably due to the change in the microstructure of the alloys. The corrosion properties were related to the microstructural properties as well as to the pore density.
Ključne besede: Ti-6Al-4V, dental alloys, artificial saliva, selective laser melting, corrosion
Objavljeno v DiRROS: 31.05.2023; Ogledov: 255; Prenosov: 114
Celotno besedilo (1,97 MB)
Gradivo ima več datotek! Več... |
7. The influence of the hot-rolling technique for EN AW-8021B aluminium alloy on the microstructural properties of a cold-rolled foilJakob Kraner, Tomaž Smolar, Darja Volšak, Marjana Lažeta, Robert Skrbinek, Damijan Fridrih, Peter Cvahte, Matjaž Godec, Irena Paulin, 2021, izvirni znanstveni članek Ključne besede: aluminium alloys, hot rolling, microstructure, EBSD, burst test
Objavljeno v DiRROS: 06.05.2022; Ogledov: 510; Prenosov: 137
 Povezava na datoteko |
