Iskanje po repozitoriju

A+ | A- | | SLO | ENG

Povzetek: Belite-sulfoaluminate (BCSA) cements are low-carbon mineral binders, which require low energy consumption and allow the incorporation of various secondary raw materials in the clinker raw meal. In this study two types of unprocessed steel slags, coming from stainless steel production, were incorporated in the BCSA clinkers. The clinker phase composition, clinker reactivity, and the compressive strength of the cement were studied to evaluate the possible use of the slag in BCSA clinkers. The cement clinkers were synthesized by using natural raw materials, white titanogypsum, mill scale, as well as two different steel slags: (i) EAF S slag, which is a by-product of melting the recycled steel scrap in an electric arc furnace, and (ii) la dle slag as a by-product of the processes of secondary metallurgy, in various quantities. Raw mixtures with two different targeted phase compositions varying in belite, calcium sulfoaluminate and ferrite phases were sintered at 1250 °C. Clinker phases were determined by Rietveld quantitative phase analysis, while their distribution, morphology and incorporation of foreign ions in the phases were studied by SEM/EDS analysis. The clinker reactivity was determined by isothermal calorimetry. BCSA cements were prepared by adding titanogypsum. The compressive strength of the cement pastes was determined after 7 days of hydration. The presence of a predicted major clinker phases was confirmed by Rietveld analysis, however periclase was also detected. Microscopy revealed subhedral grains of belite and euhedral grains of calcium sulfoaluminate phases, while ferrite occurred as an interstitial phase. The results showed differences in the microstructure and reactivity of the clinker and cement, which can be attributed to varying amounts of ettringite due to different slag types
Ključne besede: belite-sulfoaluminate cement, cement clinker, steel slags, clinker microstructure, cement reactivity
Objavljeno v DiRROS: 19.01.2024; Ogledov: 187; Prenosov: 82
Celotno besedilo (18,89 MB)
Gradivo ima več datotek! Več...

Povzetek: The construction sector is recognised as having a key impact on the life on Earth. Consequently, the EU has set clear environmental goals for 2030 and 2050, and is developing policies and tools to achieve them. One of the tools for achieving these goals is to establish a system for the evaluation of the environmental performance of buildings, with the priorities of reducing GHG emissions, saving with natural resources and preserving the environment, while maintaining sustainable development and ensuring a healthy living environment. Slovenia has joined in achieving this goal with a study on the state-of-play, commissioned a few years ago by the Ministry of the Environment and Spatial Planning, as the starting point for the development of sustainable building indicators (SBIs). The research, which included an analysis of the Slovenian legislation, commercial certification systems for sustainable buildings and development in the field of green public procurement, exposed complementary but rather different goals and views. It further showed that the Level(s), which provides a common EU approach in assessing the environmental performance of buildings, seems to be the most appropriate framework and the basis for the development of the Slovenian system of SBIs. The development of the Slovenian SBIs is currently underway within the project LIFE IP CARE4CLIMATE with the preparation of guidelines, data sources and procedures for determining the value of individual indicators for the assessment of buildings. Initial research with key construction stakeholders has shown that the solution must be linked to the national building legislation, computational methods and software tools, and also to the established planning procedures. The analyses have also shown that, parallel to developing such a system, it is essential to provide a functional supporting environment and a specific, purposely designed information platform to connect the stakeholders with the developers of the sustainable building indicators system.
Ključne besede: sustainable building indicators, evaluation, assessment, Level(s), CARE4CLIMATE
Objavljeno v DiRROS: 19.01.2024; Ogledov: 152; Prenosov: 74
Celotno besedilo (18,89 MB)
Gradivo ima več datotek! Več...

Povzetek: To determine the possibilities for the implementation of sustainable building indicators in Slovenia, testing of the first version of the indicators, developed in the CARE4CLIMATE project and based on the EU Level(s) framework, was carried out in 2022. Invited and interested stakeholders of the construction process were provided with video content and instructions on the Slovenian e-platform of sustainable building indicators. In addition, workshops and lectures with individual subjects were also performed. The final phase of the training and testing procedure included a questionnaire, which was used to obtain information about the participants' opinions regarding the indicators. The analysis of the results of the testing, which was focused on level 2, confirmed the key preliminary finding of the development group, namely that currently, due to the lack of certain knowledge, data, and tools, all indicators for this level are not yet feasible in practice. The research also highlighted the greater need for training and specialization of experts in this field. At the same time, it showed that the testing of the first version itself was a big challenge: only 30 experts fully participated and filled out the online questionnaire. This number seems alarmingly low at first glance, but compared to level(s) testing in the EU member states, it is much more than 50 times higher. However, for the further execution of the indicators in Slovenia, it will therefore be necessary to invest a lot of effort and engagement. It is likely that state support will also be needed, for example, in the form of financial mechanisms or incentives and/or legislative background.
Ključne besede: sustainability, building, indicators, implementation, testing, questionnaire
Objavljeno v DiRROS: 04.01.2024; Ogledov: 202; Prenosov: 88
Celotno besedilo (290,30 KB)
Gradivo ima več datotek! Več...

Povzetek: Garnets (19 pieces) of Late Antique S-fibulae from the archaeological site at Lajh-Kranj (Slovenia) were analysed with Raman microspectroscopy to obtain their mineral characteristic, including inclusion assemblage. Most garnets were determined as almandines Type I of pyralspite solid solution series; however, three garnets showed a higher Mg, Mn and Ca contents and were determined as almandines Type II. Most significant Raman bands were determined in the range of 169–173 cm−1 (T(X2+)), 346–352 cm−1 (R(SiO4)), 557–559 cm−1 (ν2), 633–637 cm−1 (ν4), 917–919 cm−1 (ν1), and 1042–1045 cm−1 (ν3). Shifting of certain Raman bands toward higher frequencies was the result of an increase of the Mg content in the garnet composition, which also indicates the presence of pyrope end member in solid garnet solutions. Inclusions of apatite, quartz, mica, magnetite, ilmenite, as well as inclusions with pleochroic or radiation halo and tension fissures (zircon), were found in most of the garnets. Rutile and sillimanite were found only in garnets with the highest pyrope content. Spherical inclusions were also observed in two garnets, which may indicate the presence of melt or gas residues. The determined inclusion assemblage indicates the formation of garnets during medium- to high-grade metamorphism of amphibolite or granulite facies. According to earlier investigations of the garnets from Late Antique jewellery, the investigated garnets are believed to originate from India.
Ključne besede: garnets, inclusions, Sfibulae, Late Antiquity, provenance, Raman microspectroscopy, XRF spectroscopy
Objavljeno v DiRROS: 20.12.2023; Ogledov: 169; Prenosov: 144
Celotno besedilo (35,45 MB)
Gradivo ima več datotek! Več...

Povzetek: The pozzolanic activity of five different types of ash was studied using various direct and indirect methods. In addition to strength activity index (SAI) determination and the Frattini test, ash pozzolanicity was assessed via differential thermal and thermogravimetric analyses (DTA/TG) after curing for 7, 28 and 90 days. The results showed that, due to their respective mineralogical, chemical and physical characteristics, the ashes exhibited different levels of pozzolanic activity in terms of the amount of lime with which they could chemically bind, as well as reaction kinetics. Although SAI and Frattini test results were not in agreement in the case of some of the ashes, DTA/TG analysis revealed that a certain amount of portlandite was consumed, thus confirming the occurrence of a pozzolanic reaction. The results also showed that ashes with higher amounts of reactive SiO2 were more reactive, while those with higher BET surface areas displayed a faster pozzolanic reaction rate.
Ključne besede: biomass ash, DTA/TG, fly ash, Frattini test, pozzolanic activity, SAI
Objavljeno v DiRROS: 11.12.2023; Ogledov: 195; Prenosov: 97
Celotno besedilo (1,05 MB)
Gradivo ima več datotek! Več...