Search the repository

A+ | A- | | SLO | ENG

Abstract: Uneven road surfaces are the primary source of excitation in the dynamic interaction between a bridge and a vehicle and can lead to errors in bridge weigh-in-motion (B-WIM) systems. In order to correctly reproduce this interaction in a numerical model of a bridge, it is essential to know the magnitude and location of the various roadway irregularities. This paper presents a methodology for measuring the 3D road surface using static terrestrial laser scanning and a numerical model for simulating vehicle passage over a bridge with a measured road surface. This model allows the evaluation of strain responses in the time domain at any bridge location considering different parameters such as vehicle type, lateral position and speed, road surface unevenness, bridge type, etc. Since the time domain strains are crucial for B-WIM algorithms, the proposed approach facilitates the analysis of the different factors affecting the B-WIM results. The first validation of the proposed methodology was carried out on a real bridge, where extensive measurements were performed using different sensors, including measurements of the road surface, the response of the bridge when crossed by a test vehicle and the dynamic properties of the bridge and vehicle. The comparison between the simulated and measured bridge response marks a promising step towards investigating the influence of unevenness on the results of B-WIM.
Keywords: interakcija vozilo in most, terestično lasersko skeniranje, neravnost vozišča, numerično modeliranje
Published in DiRROS: 26.01.2024; Views: 214; Downloads: 87
Full text (12,08 MB)
This document has many files! More...

Abstract: V publikaciji je predstavljen Zavod za gradbeništvo Slovenije, ob 70-letnici. V osmih poglavjih je predstavljeno znanstveno-raziskovalno in strokovno delo. V nadaljevanju sledijo poglavja, ki predstavljajo posamezne zanszveno-raziskovalne laboratorije in strokovne službe.
Keywords: Zavod za gradbeništvo Slovenije, ZAG Ljubljana, gradbeništvo, znanstveno-raziskovalna dejavnost, strokovna dejavnost, laboratoriji, predstavitev, 70 let, sedemdeset let, grajeno okolje, digitalizacija, gradnja, les, krožno gospodarstvo, napredni materiali v gradbeništvu, potresi, stavbe, trajnostna gradnja, bivanje, ekologija, voda, zrak, zemlja
Published in DiRROS: 19.01.2024; Views: 190; Downloads: 149
Full text (19,25 MB)
This document has many files! More...

Abstract: Optimalno upravljanje mostov, ki vključuje stroške vzdrževanja, potencialna tveganja in vzdrževanje funkcionalnosti, zahteva natančne informacije o stanju konstrukcij. Eden od ključnih kazalnikov obnašanja je konstrukcijska varnost mostu, ki zahteva poglobljeno poznavanje prometnih obremenitev in njegove odpornosti proti obremenitvam. Vrednotenje varnosti je predvsem ključno za stare mostove, ki so poškodovani in se bližajo koncu življenjskega cikla. Varnost takšnih mostov z uporabo tradicionalnih računskih metod pogosto težko dokažemo. Da bi se izognili nepotrebnim ukrepom, kot je ojačitev ali celo zamenjava mostu, je priporočljivo narediti celovito analizo, ki vključuje preiskave materialov in meritve obnašanja mostu pod prometno obtežbo. Prispevek predstavlja tehnologijo tehtanja vozil med vožnjo v prostem prometnem toku na mostovih (angl. bridge weigh-in-motion oz. B-WIM), ki lahko učinkovito izmeri parametre obnašanja mostu, ki so ključni za določitev njihove realne varnosti: osne obremenitve in medosne razdalje vozil ter vplivnice, faktorje porazdelitve obtežbe in dinamični odziv konstrukcije. Poznavanje pravih vrednosti teh parametrov zmanjšuje negotovosti, povezane z obremenitvami in odzivom konstrukcije. Poleg tega lahko zaradi večje zanesljivosti izmerjenih parametrov v analizah zmanjšamo varnostne faktorje. To omogoča bolj optimalno vzdrževanje in uporabo infrastrukture ter racionalnejšo uporabo razpoložljivih finančnih sredstev.
Keywords: upravljanje mostov, konstrukcijska varnost, odziv na prometno obtežbo, tehtanja vozil med vožnjo, prosti prometni tok na mostovih
Published in DiRROS: 04.12.2023; Views: 237; Downloads: 89
Full text (2,22 MB)
This document has many files! More...

Abstract: The paper presents a case study of a considerably cracked and degraded bridge in Slovenia: with the implementation of in-situ measurements under bending and shear and the use of a non-destructive acoustic emission technique. Despite the existing crack system, the latter was able to detect microstructural changes. These were characterised by low values of average frequency (AF), as well as lower values of the rise time-amplitude ratio (RA), and energy. A correlation between shear capacity and acoustic activity was observed. This promises to expand the use of AE in the process of assessing of the load-bearing capacity of existing concrete structures.
Keywords: shear resistance, shear crack, crack width, acoustic emission (AE) parameters, bridge girder, stiffness, elasticity, damage evaluation
Published in DiRROS: 28.11.2023; Views: 192; Downloads: 105
Full text (1,08 MB)
This document has many files! More...

Abstract: Finite element (FE) model updating of bridges is based on the measured modal parameters and less frequently on the measured structural response under a known load. Until recently, the FE model updating did not consider strain measurements from sensors installed for weighing vehicles with bridge weigh-in-motion (B-WIM) systems. A 50-year-old multi-span concrete highway viaduct, renovated between 2017 and 2019, was equipped with continuous monitoring system with over 200 sensors, and a B-WIM system. In the most heavily instrumented span, the maximum measured longitudinal strains induced by the full-speed calibration vehicle passages were compared with the modelled strains. Based on the sensitivity study results, three variables that affected its overall stiffness were updated: Young’s modulus adjustment factor of all structural elements, and two anchorage reduction factors that considered the interaction between the superstructure and non-structural elements. The analysis confirmed the importance of the initial manual FE model updating to correctly reflect the non-structural elements during the automatic nonlinear optimisation. It also demonstrated a successful use of pseudo-static B-WIM loading data during the model updating process and the potential to extend the proposed approach to using random B-WIM-weighed vehicles for FE model updating and long-term monitoring of structural parameters and load-dependent phenomena.
Keywords: monitoring, bridge, viaduct, bridge weigh-in-motion (B-WIM), structural health monitoring (SHM), finite element (FE), calibration, model updating
Published in DiRROS: 29.05.2023; Views: 395; Downloads: 218
Full text (26,28 MB)
This document has many files! More...