Iskanje po repozitoriju

A+ | A- | | SLO | ENG

Povzetek: Edible jellyfish are a traditional Southeast Asian food, usually prepared as a rehydrated product using a salt and alum mixture, whereas they are uncommon in Western Countries and considered as a novel food in Europe. Here, a recently developed, new approach for jellyfish processing and stabilization with calcium salt brining was upgraded by modifying the pre-treatment step of freshly caught jellyfish and successfully applied to several edible species. Treated jellyfish obtained by the application of the optimized version of this method respected both quality and safety parameters set by EU law, including no pathogenic microorganisms, absence or negligible levels of histamine and of total volatile basic nitrogen, no heavy metals; and the total bacterial, yeast, and mold counts were either negligible or undetectable. Jellyfish treated by the presented method exhibited unique protein content, amino acid and fatty acid profiles, antioxidant activity, and texture. The optimized method, initially set up on Rhiszostoma pulmo, was also successfully applied to other edible jellyfish species (such as Cotylorhiza tuberculata, Phyllorhiza punctata, and Rhopilema nomadica) present in the Mediterranean Sea. This study discloses an innovative process for the preparation of jellyfish-based food products for potential future distribution in Europe.
Ključne besede: jellyfish, novel food, safety, quality, nutritional traits, organic calcium salts
Objavljeno v DiRROS: 17.07.2024; Ogledov: 301; Prenosov: 216
Celotno besedilo (1,11 MB)
Gradivo ima več datotek! Več...

Povzetek: This study investigated the influence of different cooling regimes on the microstructure and consequent reactivity of belite-sulfoaluminate clinkers. The cement clinkers were synthesized by incorporating secondary raw materials, such as titanogypsum and bottom ash, to the natural raw materials. Clinker phases were determined by Rietveld quantitative phase analysis, while the distribution morphology and the incorporation of substitute ions in the phases were characterized by scanning electron microscopy using energy-dispersive X-ray spectroscopy (SEM/EDS). Clinker reactivity was studied using isothermal calorimetry and was additionally investigated through compressive strength, which was determined for the cement prepared from the synthesized clinkers. X-ray diffraction analysis showed that, as well as the three main phases (belite, calcium sulfoaluminate, and ferrite), the clinkers contained additional minor phases (mayenite, gehlenite, arkanite, periclase, and perovskite), the ratios of which varied according to the cooling regime utilized. Microscopic observations indicated that the cooling regime also influenced the crystal size and morphology of the main phases, which consequently affected clinker reactivity. Furthermore, a smaller amount of substitute elements was incorporated in the main phases when cooling was slowed. Results showed that, in comparison to clinkers cooled at slower rates, air quenched clinkers reacted faster and exhibited a higher compressive strength at 7 days.
Ključne besede: clinkers, belite, calcium sulfoaluminate, cooling, microstructure, reactivity
Objavljeno v DiRROS: 20.12.2023; Ogledov: 596; Prenosov: 264
Celotno besedilo (4,18 MB)
Gradivo ima več datotek! Več...

Povzetek: Calcium acetoacetate, Ca(OAcAc)2, was exposed 7, 30 and 365 days to different values of relative humidity (33%, 48%, 75% and 96%) at 40 °C in order to study its transformation to CaCO3. The resulting Ca(OAcAc)2 decomposition and the time dependence of the phase transformations were monitored and critically evaluated by Fourier transform infrared spectroscopy, field emission scanning electron microscopy and X-ray powder diffraction. The impact of relative humidity on CaCO3 polymorph formation was thoroughly assessed. In all of the conditions used and for all ageing periods, the formed crystal structure is found to be vaterite. At the lowest relative humidity (33%), the amorphous CaCO3 remains more or less almost untransformed even after one year of exposure. It is proposed that the reason for the stability of amorphous CaCO3 is due to the limited amount of physisorbed water on the surfaces of the particles, which is considered the driving force for its transformation. However, the carbonation process is faster in the case of the highest humidity (96%). The findings are not only important for better solutions in the field of cultural heritage, but also shed new light on the fundamental mechanism of CaCO3 crystallization.
Ključne besede: calcium acetoacetate, relative humidity, carbonation, amorphous carbonate, vaterite, mechanism
Objavljeno v DiRROS: 22.11.2023; Ogledov: 765; Prenosov: 368
Celotno besedilo (6,55 MB)
Gradivo ima več datotek! Več...

Povzetek: The influence of different curing temperatures on the hydration of belite-calcium sulfoaluminate cement was investigated at 20, 40 and 60 °C. The hydration kinetics and the hydrated phase assemblages were studied by isothermal calorimetry, X-ray powder diffraction, differential thermal analysis and thermogravimetric analysis, as well as field emission scanning electron microscopy. The compressive strength development of the cement pastes was also determined. Results showed that, at early ages, hydration was faster and early compressive strength was higher at elevated temperatures than at ambient temperature. On the other hand, at late ages in cement pastes cured at 60 °C, the amount of ettringite decreased, leading to lower compressive strength, indicating that the degree of hydration was lower at higher temperatures. Moreover, at elevated temperatures prismatic ettringite crystals became smaller due to faster hydration. Other hydration products present were aluminium hydroxide, which is formed together with ettringite from the hydration of calcium sulfoaluminate and gypsum, and C–S–H which precipitates as a main hydration product of belite. Belite hydrated in a lesser amount, especially at 60 °C, when the lowest amount of C–S–H was observed.
Ključne besede: hydration, cement, temperature, belite, calcium sulfoaluminate, open access, hidratacija, cement, temperatura, belit, kalcijev sulfoaluminat
Objavljeno v DiRROS: 04.08.2023; Ogledov: 688; Prenosov: 480
Celotno besedilo (7,33 MB)
Gradivo ima več datotek! Več...

Povzetek: The influence of different amounts of gypsum on the hydration of a belite-rich and a yeʼelimite-rich belite-calcium sulfoaluminate clinker (BCSA) was investigated. The hydration kinetics, phase assemblages and compressive strength development of cements prepared using yeʼelimite/ calcium sulfate molar ratios of 1, 1.5 and 2 were studied. Besides ettringite and monosulfate, aluminium hydroxide, strätlingite, C-S-H, iron-containing siliceous hydrogarnet and hydrotalcite were present as hydration products. Increasing the amount of gypsum increased the ratio of ettringite to monosulfate formed in the cement paste, lowered the amount of pore solution, delayed the dissolution of belite and ferrite, decreased the formation of strätlingite and, in the case of the yeʼelimite-rich BCSA, led to an increase in compressive strength. Increased amounts of belite in the clinker led to the formation of higher quantities of C-S-H, at the expense of straätlingite and a lower compressive strength, as belite has a lower degree of reaction than yeʼelimite and due to the formation of more C-S-H and stratlingite compared to the more space-filling ettringite. The thermodynamic model established for BCSA cement hydration agrees well with the experimental data. Compressive strength directly correlated with bound water from thermogravimetric analyses and inversely correlated with the porosity calculated from thermodynamic modelling.
Ključne besede: belite-calcium sulfoaluminate cement, gypsum, hydration, thermodynamic modelling
Objavljeno v DiRROS: 28.07.2023; Ogledov: 625; Prenosov: 533
Celotno besedilo (1,74 MB)
Gradivo ima več datotek! Več...