31. Effect of laser texturing pattern on Ti6Al4Vtribocorrosion in a physiological solutionMarjetka Conradi, Tadeja Kosec, Bojan Podgornik, Aleksandra Kocijan, Janez Kovač, Damjan Klobčar, 2022, original scientific article Abstract: Laser texturing is a process that alters a material’s surface properties by modifying its morphology, which can improve properties like adherence, wettability, thermal and electrical conductivity and friction. Here, the effect of laser texturing was studied on an alpha-beta titanium alloy (Ti6Al4V) biomedical material. Two types of patterned surfaces, cross-hatch with varying scan-line separations, Dx = 100, 180 and 280 μm and dimples of 200 μm size, were prepared on the surface of alpha-beta titanium alloy by laser technology. Prepared samples were characterised for their surface properties, such as corrosion, wear-induced corrosion, friction and wettability. Electrochemical and tribocorrosion properties in a physiological solution were studied on the samples with different texture densities of cross-hatch pattern and dimples and compared to the as-received alpha-beta titanium alloy surface. Corrosion rate decreased for laser-textured samples, especially for cross-hatch texture (down to 1 μm/year for Dx = 180 μm) when compared to the as-received alpha-beta titanium alloy surface due to the changed laser-induced surface film and wetting properties. Friction coefficient slightly decreased for all laser-textured surfaces, most noticeably for cross-hatch patterns, from 0.38 (as-received) down to 0.34 (Dx = 180 and 280 μm). The main contribution to total wear in physiological solution increased due to the mechanical wear, which is governed by the removal of the surface oxide layer induced by laser texturing.
Keywords: TiAIV, laser texturing, tribocorrosion, open access
Published in DiRROS: 17.05.2023; Views: 294; Downloads: 119
 Full text (2,19 MB)
This document has many files! More... |
32. Investigation of surface treatment effects on the environmentally-assisted cracking behaviour of Alloy 182 in boiling water reactor environmentZaiqing Que, Bojan Zajec, Stefan Ritter, Tommi Seppänen, Timo Saario, Aki Toivonen, Aleksandra Treichel, Valentin Lautaru, Fabio Scenini, 2022, original scientific article Abstract: Surface treatments of primary circuit components in light water reactors are regarded as possible ways to mitigate environmentally-assisted cracking (EAC). To date, it is not fully conclusive which surface condition is suitable to reduce the EAC initiation susceptibility. Constant extension rate tensile (CERT) tests were performed by several labs using flat tapered tensile specimens with different surface conditions (ground, industrial face milled, advanced face milled and shot peened), exposed to a boiling water reactor normal water chemistry environment at 288°C. Despite some scatter in the results, the CERT tests revealed that the EAC initiation susceptibility seems lowest for the advanced face milled surface and highest for the shot peened surface. However, it must be emphasised that the differences were moderate and that the surprising behaviour of the shot peened surface can be explained. The mechanical grinding of the surface did not significantly retard EAC initiation compared to industrial face milling.
Keywords: crack initiation, environmentally-assisted cracking, Alloy 182, surface machining, boiling water reactor, open access
Published in DiRROS: 05.05.2023; Views: 360; Downloads: 151
Full text (4,12 MB)
This document has many files! More... |
33. |
34. Genska terapija v onkologiji, prvi razvojni koraki v SlovenijiMaja Čemažar, Tanja Jesenko, Maša Omerzel, Boštjan Markelc, Urška Kamenšek, Simona Kranjc Brezar, Špela Kos, Urša Lampreht Tratar, Katarina Žnidar, Andrej Renčelj, Urška Matkovič, Teja Valant, Kristina Levpušček, Živa Modic, Tilen Komel, Tim Božič, Urša Kešar, Barbara Starešinič, Katja Uršič Valentinuzzi, Monika Savarin, Primož Strojan, Gorana Gašljević, Maja Ota, Aleš Grošelj, Črt Jamšek, Rosana Hudej, Matjaž Peterka, Franc Smrekar, Barbara Hubad, Marjan Hosta, Jaka Kužnik, Alojz Hosta, Damijan Miklavčič, Matej Reberšek, Aleksandra Cvetkoska, Anja Zajc, Janja Dermol-Černe, Nataša Tozon, Nina Milevoj, Alenka Nemec Svete, Gregor Serša, 2022, professional article Abstract: Genska terapija postaja čedalje bolj zanimiva tudi v onkologiji. Med aplikacijami je morda najzanimivejša imunostimulacija. Pripravimo lahko plazmidno DNA, ki nosi zapis za različne imunostimulatorne molekule, ki jih vnesemo v celice tumorjev ali normalnih tkiv. Ta tkiva postanejo proizvajalci teh molekul, ki lahko delujejo lokalno ali pa se izločajo tudi sistemsko v krvni obtok. Ker plazmidna DNA ne prehaja celične membrane, so potrebni dostavni sistemi, virusni ali nevirusni. V naših študijah uporabljamo predvsem nevirusni dostavni sistem – elektroporacijo. Interlevkin 12 (IL-12) je eden od zanimivih citokinov, za katerega je znano protitumorsko delovanje s spodbujanjem imunskega odziva in antiangiogenim delovanjem. Namen projekta SmartGene.si je bil pripraviti plazmid z zapisom za interlevkin 12 (plazmid phIL12) in pripraviti vse potrebno za njegovo klinično testiranje za zdravljenje kožnih tumorjev. V konzorciju smo združili moči s partnerji z akademskega in industrijskega področja. Treba je bilo pripraviti plazmid za uporabo v humani onkologiji po zahtevah Evropske agencije za zdravila (EMA). Za prijavo klinične študije na Javno agencijo za zdravila in medicinske pripomočke (JAZMP) smo morali izvesti tudi vse neklinične raziskave o varnosti in učinkovitosti zdravila. Nato je bilo treba razviti postopek priprave zdravila, zagotoviti primerne prostore za pripravo in izvedbo postopka priprave zdravila. V treh letih smo dosegli vse te zastavljene cilje in dobili dovoljenje za izvajanje klinične študije na kožnih tumorjih, ki ga je izdala JAZMP na osnovi pozitivnega mnenja Komisije Republike Slovenije za medicinsko etiko. Zdaj poteka klinična študija faze I preizkušanja plazmida phIL12 na kožnih tumorjih glave in vratu z namenom preveriti varnost in sprejemljivost genskega elektroprenosa plazmida v tumorje. Cilj študije je prav tako določiti primeren odmerek zdravila, ki bi ga v nadaljnji klinični študiji uporabili kot adjuvantno zdravljenje k ablativnim terapijam, kot sta radioterapija ali elektrokemoterapija.
Keywords: genska terapija, interlevkin-12, plazmidna DNA, elektroprenos genov, rak kože
Published in DiRROS: 01.07.2022; Views: 1191; Downloads: 241
Full text (420,40 KB) |
35. Current trends on mechanical, corrosion resistance, and antibacterial properties of metallic materials : editorialMarjetka Conradi, Aleksandra Kocijan, 2022, preface, editorial, afterword Keywords: steel, corrosion resistance, mechanical properties, antibacterial properties
Published in DiRROS: 22.06.2022; Views: 498; Downloads: 136
 Link to file |
36. Water versus oil lubrication of laser-textured Ti6Al4V alloy upon addition of MoS2 nanotubes for green tribologyMarjetka Conradi, Bojan Podgornik, Aleksandra Kocijan, Maja Remškar, Damjan Klobčar, 2022, original scientific article Keywords: green tribology, surface texturing, MoS2 nanotubes, lubrication, Ti6Al4V alloy
Published in DiRROS: 06.05.2022; Views: 485; Downloads: 160
Link to file |
37. The influence of the plasma-nitriding temperature on the microstructure evolution and surface properties of additive-manufactured 18Ni300 maraging steelMatjaž Godec, Francisco Ruiz-Zepeda, Bojan Podgornik, Črtomir Donik, Aleksandra Kocijan, Danijela Anica Skobir Balantič, 2022, original scientific article Keywords: maraging steel, powder bed fusion, plasma nitriding, microstructure, wear resistance, corrosion resistance
Published in DiRROS: 06.05.2022; Views: 591; Downloads: 206
Full text (6,68 MB)
This document has many files! More... |
38. |
39. |
40. Preparation and characterization of the sulfur-impregnated natural zeolite clinoptilolite for Hg(II) removal fromaqueous solutionsMarin Ugrina, Martin Gaberšek, Aleksandra Daković, Ivona Nuić, 2021, original scientific article Abstract: Sulfur-impregnated zeolite has been obtained from the natural zeolite clinoptilolite by chemical modification with Na2S at 150 °C. The purpose of zeolite impregnation was to enhance the sorption of Hg(II) from aqueous solutions. Chemical analysis, acid and basic properties determined by Bohem’s method, chemical behavior at different pHo values, zeta potential, cation-exchange capacity (CEC), specific surface area, X-ray powder diffraction (XRPD), scanning electron microscopy with energy-dispersive X-ray analysis (SEM-EDS), Fourier transform infrared spectroscopy (FTIR), as well as thermogravimetry with derivative thermogravimetry (TG-DTG) were used for detailed comparative mineralogical and physico-chemical characterization of natural and sulfur-impregnated zeolites.
Keywords: zeolit, klinoptilolit, živo srebro, onesnaženje okolja
Published in DiRROS: 03.03.2022; Views: 611; Downloads: 267
Full text (6,88 MB) |
