1. Microstructural, corrosion and mechanical properties of a WE43 alloy : conventional extrusion versus SPDAnna Dobkowska, Aleksandra Zielińska, Irena Paulin, Črtomir Donik, Milena Koralnik, Bogusława Adamczyk-Cieślak, Monika Wieczorek-Czarnocka, Dariusz Kuc, Jiří Kubásek, Tomasz Mikuszewski, Matjaž Godec, Jarosław Mizera, 2024, original scientific article Abstract: A hexagonal close-packed-structure WE43 alloy was extruded without any preheating of the initial billet using extrusion with an oscillating die to improve the corrosion and mechanical properties. The WE43 alloy was extruded at high ratios of R 1 5:1, R 2 7:1 and R 3 10:1. Electron back-scatter diffraction and transmission electron microscopy were used to determine the microstructural properties of the alloys. The influence of the extrusion method and the extrusion ratios on the corrosion and mechanical properties were investigated. Electrochemical tests were performed, and the corrosion damage was inspected. Tensile tests were made using micro specimens. When compared to conventional extrusion, the microstructural changes obtained with the KoBo method at R 5:1 increased the corrosion resistance, which was not only due to the grain refinement, but also due to the intensity of the texture. A decline in the corrosion resistance of the alloys deformed at higher extrusion ratios was observed. This was a result of the massive plastic strain imposed by the KoBo die. The room-temperature mechanical properties of the KoBo-extruded alloys were improved. However, at higher temperatures the mechanical properties decreased due to the solutioning of tiny triple precipitates.
Keywords: WE43, several plastic deformation, microstructure, corrosion, mechanical properties
Published in DiRROS: 23.07.2024; Views: 167; Downloads: 53
 Link to file |
2. Microstructure and properties of an AZ61 alloy after extrusion with a forward-backward oscillating die without preheating of the initial billetAnna Dobkowska, Aleksandra Zielińska, Irena Paulin, Črtomir Donik, Maciej Łojkowski, Milena Koralnik, Bogusława Adamczyk-Cieślak, Krystian Paradowski, Marek Tkocz, Dariusz Kuc, Jiří Kubásek, Matjaž Godec, Wojciech Święszkowski, 2023, original scientific article Keywords: magnesium alloys, severe plastic deformation, microstructure, mechanical properties, corrosion, extrusion, high deformation ratio
Published in DiRROS: 17.05.2024; Views: 323; Downloads: 191
Link to file |
3. |
4. Monitoring the galvanic corrosion of copper–steel coupling in bentonite slurry during the early oxic phase using coupled multielectrode arraysTadeja Kosec, Miha Hren, Klara Prijatelj, Bojan Zajec, Nina Gartner, Andraž Legat, 2023, original scientific article Abstract: In the case of a two-part container for spent nuclear fuel, consisting of an iron-based inner structure with a copper coating, the potential perforation of copper through minor damage may result in intensive galvanic corrosion between copper and steel. The present work focuses on the corrosion of steel galvanically coupled to copper and exposed to a slightly saline environment under oxic conditions. The electrochemical processes on individual electrodes were monitored by coupled multielectrode arrays (CMEAs). The CMEAs were either in contact with groundwater saturated with bentonite or immersed in groundwater only. Very high galvanic corrosion currents were detected between carbon steel and pure copper in the early oxic phase. Additionally, the use of CMEAs further made it possible to monitor the distribution of cathodic currents around the steel electrode, which behaved anodically. Various microscopy and spectroscopy techniques were applied to identify the modes of corrosion and the type of corrosion products present at the end of the period of exposure.
Keywords: copper, steel, bentonite, Aspö groundwater, coupled multi electrode array, electrochemical properties, Raman analysis, corrosion
Published in DiRROS: 16.11.2023; Views: 692; Downloads: 211
 Full text (1,66 MB)
This document has many files! More... |
5. Current trends on mechanical, corrosion resistance, and antibacterial properties of metallic materials : editorialMarjetka Conradi, Aleksandra Kocijan, 2022, preface, editorial, afterword Keywords: steel, corrosion resistance, mechanical properties, antibacterial properties
Published in DiRROS: 22.06.2022; Views: 725; Downloads: 190
Link to file |
