1. Stabilization of fish protein‐based adhesive by reduction of its hygroscopicityBranka Mušič, Jaka Gašper Pečnik, Andreja Pondelak, 2024, original scientific article Abstract: Protein-based fish adhesives have historically been used in various bonding applications; however, due to the protein’s high affinity for water absorption, these adhesives become destabilized in high-moisture environments, resulting in reduced bondline strength and early failure. This limitation makes them unsuitable for industrial applications with higher demands. To address this issue, water-insoluble raw powder materials such as iron, copper, or zeolite were incorporated into natural fish adhesives. In this study, the hygroscopicity, dry matter content, thermal analysis (TGA/DSC), FT-IR spectroscopy, surface tension measurements, vapour permeability, and scanning electron microscope (SEM) of the modified adhesives were determined. In addition, the bonding properties of the modified adhesives were evaluated by the tensile shear strength of the lap joints, and mould growth was visually inspected. The resulting modified protein-based adhesives demonstrated improved stability in high humidity environments. Enhancing the hygroscopic properties of protein-based fish adhesives has the potential to unlock new opportunities and applications, providing a healthier and more environmentally sustainable alternative to petroleum-based adhesives.
Keywords: protein‐based adhesive, polymer stabilization, hygroscopicity, fish adhesive modification, fish industry waste, circular economy, bonding properties
Published in DiRROS: 12.08.2024; Views: 65; Downloads: 213
 Full text (15,12 MB)
This document has many files! More... |
2. Identification of marine biotechnology value chains with high potential in the Northern Mediterranean regionAna Rotter, Antonia Giannakourou, Jesús E. Argente García, Grazia Marina Quero, Charlène Auregan, Ernesta Grigalionyte-Bembič, Jan Ulčar, 2023, original scientific article Abstract: Marine (blue) biotechnology is an emerging field enabling the valorization of new products and processes with massive potential for innovation and economic growth. In the Mediterranean region, this innovation potential is not exploited as well as in other European regions due to a lack of a clear identification of the different value chains and the high fragmentation of business innovation initiatives. As a result, several opportunities to create an innovative society are being missed. To address this problem, eight Northern Mediterranean countries (Croatia, France, Greece, Italy, Montenegro, Portugal, Slovenia and Spain) established five national blue biotechnology hubs to identify and address the bottlenecks that prevent the development of marine biotechnology in the region. Following a three-step approach (1. Analysis: setting the scene; 2. Transfer: identification of promising value chains; 3. Capitalization: community creation), we identified the three value chains that are most promising for the Northern Mediterranean region: algae production for added-value compounds, integrated multi-trophic aquaculture (IMTA) and valorization aquaculture/fisheries/processing by-products, unavoidable/unwanted catches and discards. The potential for the development and the technical and non-technical skills that are necessary to advance in this exciting field were identified through several stakeholder events which provided valuable insight and feedback that should be addressed for marine biotechnology in the Northern Mediterranean region to reach its full potential.
Keywords: marine biotechnology, blue biotechnology, innovation, value chains, Northern Mediterranean, microalgae, macroalgae, IMTA, circular economy, discards valorization
Published in DiRROS: 12.07.2024; Views: 128; Downloads: 109
Full text (2,41 MB)
This document has many files! More... |
3. Site-specific dataset of mining and metallurgical residues for resource managementCarlo Cormio, Marta Fernández-Alonso, Peter Cleall, Soraya Heuss-Aßbichler, Daniela Guglietta, Danielle Sinnett, Katalin Szabó, Gorazd Žibret, Maria Teresa Carvalho, Ulrich Kral, Tim T. Werner, Bruno Lemiere, 2024, other scientific articles Abstract: This geospatial dataset provides a compilation of findings from an evidence-based review of site-specific resource assessments of mining and metallurgical residues. Information pertaining to location, target material, geological knowledge, extractability, resource classification and stakeholder perspectives was collected from publicly available reports, articles, academic theses, and databases. The dataset includes 44 relevant data attributes from 64 mining and metallurgical sites in 27 countries. Resource classification is available for 38 sites. The dataset can be used by evaluators of recovery projects, authorities that provide permits, as well as by decision makers in support of developing regulatory policies. The dataset facilitates future addition of sites by the research community and can be further used as a starting point to bridge the estimates on recoverable quantities to the United Nations Framework Classification (UNFC). The UNFC is a universally applicable scheme for the sustainable management of all energy, primary and secondary mineral resources. Its use is stimulated by the European Commission and is intended to be adopted by geological surveys to harmonize the data on the availability of primary and secondary raw materials in Europe in future.
Keywords: resources, reserves, mining waste, secondary raw materials, tailings, geodatabase, circular economy, resource assessment
Published in DiRROS: 10.06.2024; Views: 167; Downloads: 136
Full text (2,19 MB) |
4. Utilisation of reused steel and slag : analysing the circular economy benefits through three case studiesGenesis Camila Cervantes Puma, Adriana Salles, Janez Turk, Viorel Ungureanu, Luís Bragança, 2024, review article Abstract: This research explores sustainable construction practices focusing on material reuse, specifically reclaimed structural steel and slag. In general, the building stock is not designed for deconstruction, and material recovery for reuse at the end of life of buildings is complex and challenging. The study evaluates the benefits of content reuse through a thorough analysis of three case studies— BedZED eco-friendly housing, Angus Technopôle building, and the use of steel slag aggregate in road construction. It highlights the value of reclaimed structural steel and by-products like steel slag in waste reduction, energy conservation, and resource preservation. The BedZED case study showcases recycled steel’s cost-effectiveness and economic viability in construction, while the Angus Technopôle building exemplifies the adaptive reuse of an old steel frame building. Additionally, the third case study showcases the benefits of using Electric Arc Furnace C slag in asphalt-wearing courses, highlighting the reduction in greenhouse gas emissions and environmental impact. The versatility of reclaimed structural steel and slag is evident in integrating material reuse in building construction and road infrastructure. These case studies illustrate the potential for reusing steel and its by-products in various construction contexts, from eco-friendly housing to road development. Therefore, the study aims to demonstrate the feasibility and benefits of sustainable practices within the construction industry by showcasing the successful incorporation of reclaimed steel and slag in these projects. Considering the significant contributions of building construction to global greenhouse gas emissions, raw material extraction, and waste production, the study advocates for adopting circular economy (CE) principles within the construction industry. Finally, the analysis of case studies underscores the advantages of reclaimed structural steel and the valorisation of steel slag through the lens of CE and their contribution to sustainable development.
Keywords: circular economy, reused steel, steel slag aggregate, reclaimed steel, steel members
Published in DiRROS: 12.04.2024; Views: 308; Downloads: 141
Full text (1,17 MB)
This document has many files! More... |
5. Green transition in slovenian building and civil engineering industry : 10 years of research on alkali-activated materials and alkali-activated foamsBarbara Horvat, Branka Mušič, 2024, published scientific conference contribution (invited lecture) Abstract: The building and civil engineering industry yearly causes more than 40% of man-made CO2 and consumes raw materials for two-thirds of Mont Everest. To decrease the carbon footprint and consumption of raw materials, alkali-activated materials (AAMs) are researched as an alternative to conventional building and civil engineering products like cements, mortar, and ceramics. Ideally, locally available waste materials are used as ingredients: (i) as precursors that react with alkali and form an aluminosilicate network, and (ii) as fillers that get permanently encapsulated and safely stored in AAMs. The addition of gas bubbles and lightweight fillers transforms AAMs into alkali-activated foams and alkali-activated lightweight materials that have the potential to be used as thermal and acoustic insulation materials. Although AAMs are researched worldwide, this review focuses on the state-of-the-art localised solely to Slovenia, particularly on the materials and curing procedures used, as well as on the scientific contribution of the basic research. Besides, the year 2024 marks 10 years of research on alkali activation of raw and waste inorganic materials in Slovenia.
Keywords: secondary raw material, alkali-activated material, alkali-activated foams, alkali, circular economy, microwave irradiation, mechanical strength
Published in DiRROS: 12.03.2024; Views: 341; Downloads: 290
Full text (84,58 MB)
This document has many files! More... |
6. Degradation and Stabilization of Polymer MaterialsBranka Mušič, Andrijana Sever Škapin, 2023, other scientific articles Keywords: polymer-based materials, nano, micro, and macro composites, effects on (micro) organisms and toxicity, impact on the ecosystem, mechanisms and products of accelerated aging and degradation, physical, chemical, mechanical, thermal, and morphological, analysis, biodegradability, sustainability, life cycle, renewable and recycled resources and the circular economy
Published in DiRROS: 21.12.2023; Views: 539; Downloads: 183
Full text (226,05 KB)
This document has many files! More... |
7. Mining waste in circular economy - legislative aspectSenko Pličanič, Ana Mladenovič, Alenka Mauko Pranjić, Petra Vrhovnik, 2020, original scientific article Abstract: One of the common European commitments is a transition towards a green circular economy in which waste is not discarded and considered to be just an environmental problem, but should be recognized as an important potential source of raw materials for industry. In a priority order in waste management activities, introduced by the Waste Directive in 2012, recycling is set just behind the waste prevention and reuse. Many types of waste can be recycled, the most perspective being construction, industrial and mining wastes. The latter are produced and disposed of at mine sites during the excavation and processing of ore and are extremely perspective due to large quantities and remaining of different metals, however still underutilized, with low recycling rate. Many mining wastes are inert and do not releases contaminants into environment, however, some of them are problematic and even require monitoring. Reprocessing of these wastes, which include beneficiation and sequential extraction of valuable metals in the first phase and recycling of residues in both structural and civil engineering in the second phase establishes a zero waste model with several benefits for economy, environment and society. Out of the South-East European countries, North Macedonia has great potential to establish this model. As a consequence of long mining tradition and abundant ore resources, there are many mining and metallurgical tailings, on the other hand vivid economy and numerous sinks for use of recycled materials in construction sector can accommodate these quantities. However, there are open questions in terms of administrative procedures and legislation. What are those obstacles that accompany the smooth establishment of the proposed model from a legislative point of view? This paper deals with the situation in North Macedonia, in terms of opportunities, legislative options and the need to adopt new legislation, taking also into account the current problems in this field in Europe.
Keywords: circular economy, zero-waste approach, mining waste, construction sector, legislation, krožno gospodarstvo, pristop ničelnega odpadka, rudarski odpadki, gradbeništvo, zakonodaja
Published in DiRROS: 04.12.2023; Views: 414; Downloads: 203
Full text (435,68 KB)
This document has many files! More... |
8. Pilot production of façade panels : variability of mix designMajda Pavlin, Barbara Horvat, Vilma Ducman, 2023, published scientific conference contribution Abstract: As part of the WOOL2LOOP project, the Slovenian National Building and Civil Engineering Institute (ZAG), in collaboration with Termit d.d. were responsible for the production of façade panels. An initial mix design was developed at ZAG, where alkali-activated façade panels were produced, primarily from stone wool waste, while production took place at Termit. The mix design was changed twice during the pilot production, before a final product with suitable durability was developed. A compressive strength of up to 60 MPa and bending strength of approximately 20 MPa was achieved. The mechanical properties, however, varied, due to the unevenly milled batches of the milled mineral wool. Milling on a larger scale is very challenging, and it is difficult to obtain consistent quality of the milled material. Once the correct curing process had been found, however, the panels produced showed good performance. Moreover, the results from leaching tests showed that the elevated concentrations of certain elements (Cr, As and Mo) did not exceed the legal limits for non- hazardous waste.
Keywords: waste mineral wool, alkali activated material, façade panels, pilot production, circular economy
Published in DiRROS: 28.11.2023; Views: 423; Downloads: 200
Full text (1000,34 KB)
This document has many files! More... |
9. |
10. Digital twins and road construction using secondary raw materialsSebastjan Meža, Alenka Mauko Pranjić, Rok Vezočnik, Igor Osmokrović, Stanislav Lenart, 2021, original scientific article Abstract: Secondary raw materials (SRMs) tend to be a valuable replacement for finite virgin materials especially since construction works (i.e., building and civil engineering work such as road construction) require vast quantities of raw materials. Using SRM originating from recycling a broad range of inorganic waste materials (e.g., mining waste, different industrial wastes, construction, and demolition waste) has been recognized as a promising, generally more cost-efficient, and environmentally friendly alternative to the exploitation of natural resources. Despite the benefits of using SRM, several challenges need to be addressed before using SRM even more. One of them is the long-term durability and little-known response of construction works built using such alternative materials. In this paper, we present the activities to establish a fully functioning digital twin (DT) of a road constructed using SRM. The first part of the paper is devoted to the theoretical justification of efforts and ways of establishing the monitoring systems, followed by a DT case study where an integrated data environment synthesizing a Building Information Model and monitored data is presented. Although the paper builds upon a small scale, the case study is methodologically designed to allow parallels to be drawn with much larger construction projects.
Keywords: digital twins, road construction, circular economy
Published in DiRROS: 19.07.2023; Views: 555; Downloads: 289
Full text (4,36 MB)
This document has many files! More... |
