Iskanje po repozitoriju

A+ | A- | | SLO | ENG

Povzetek: Considering the increasing demand for nanocrystalline-cellulose in the industry, due to its exceptional physical and biological properties, cheaper and more efficient production processes are sought. Addressing environmental concerns, especially within the framework of EU policies, this study employs Life Cycle Assessment (LCA) to evaluate the environmental performance of a novel nanocrystalline-cellulose production procedure, encompassing biomass depolymerization, rinsing, and bleaching. The LCA aims to identify environmental hotspots, explore mitigation measures, and enables comparisons with other LCA studies on nanocrystalline-cellulose. The results are calculated and reported for 19 environmental impact categories, using the ReCiPe 2016 impact assessment method. The production of 1 kg of dry nanocrystalline-cellulose using the novel process emits 63.7 kg CO2 equivalent, which is lower than the literature average (68 kg CO2 equivalent). The solvent (e.g. diethylene glycol) is the major contributor to the global warming potential and fossil-fuel depletion potential in the product stage of the nanocellulose, while the electricity requirements and glycerin represent environmental hotspots regarding 15 of the 19 impact categories assessed. In terms of the water-consumption potential, the environmental hotspot is production of raw materials (e.g. cotton fibers). Electricity contributes more than 50 % of the burden to the impact categories associated with ionizing radiation, the pollution of aquatic ecosystems and human toxicity related to cancer. It also holds a significant share of the burdens for terrestrial acidification (48 % of the impact), the formation of fine particulate matter (46 % of the impact), and human toxicity related to non-cancer diseases (37 % of the impact). This underscores the importance of optimizing the production process, possibly through upscaling. Additionally, incorporating on-site renewable energy sources and utilizing biomass-derived diethylene glycol can enhance the environmental performance of nanocrystalline-cellulose.
Ključne besede: LCA, cascade use, cellulose nanocrystals, pilot production, environmental performance
Objavljeno v DiRROS: 06.02.2024; Ogledov: 145; Prenosov: 76
Celotno besedilo (5,07 MB)
Gradivo ima več datotek! Več...

Povzetek: Purpose: An estimation of the environmental impact of buildings by means of a life cycle assessment (LCA) raises uncertainty related to the parameters that are subject to major changes over longer time spans. The main aim of the present study is to evaluate the influence of modifications in the electricity mix and the production efficiency in the chosen reference year on the embodied impacts (i.e., greenhouse gas (GHG) emissions) of building materials and components and the possible impact of this on future refurbishment measures. Methods: A new LCA methodological approach was developed and implemented that can have a significant impact on the way in which existing buildings are assessed at the end of their service lives. The electricity mixes of different reference years were collected and assessed, and the main datasets and sub-datasets were modified according to the predefined substitution criteria. The influence of the electricity-mix modification and production efficiency were illustrated on a selected existing reference building, built in 1970. The relative contribution of the electricity mix to the embodied impact of the production phase was calculated for four different electricity mixes, with this comprising the electricity mix from 1970, the current electricity mix and two possible future electricity-mix scenarios for 2050. The residual value of the building was also estimated. Results and discussion: In the case presented, the relative share of the electricity mix GHG emission towards the total value was as high as 20% for separate building components. If this electricity mix is replaced with an electricity mix having greater environmental emissions, the relative contribution of the electricity mix to the total emissions can be even higher. When, by contrast, the modified electricity mix is almost decarbonized, the relative contribution to the total emissions may well be reduced to a point where it becomes negligible. The modification of the electricity mix can also influence the residual value of a building. In the observed case, the differences due to different electricity mixes were in the range of 10%. Conclusions: It was found that those parameters that are subject to a major change during the reference service period of the building should be treated dynamically in order to obtain reliable results. Future research is foreseen to provide additional knowledge concerning the influence of dynamic parameters on both the use phase and the end-of-life phase of buildings, and these findings will also be important when planning future refurbishment measures.
Ključne besede: global warming potential (GWP), production phase, electricity mix, production efciency, residual value, refurbishment, building components, life cycle assessment (LCA)
Objavljeno v DiRROS: 31.07.2023; Ogledov: 380; Prenosov: 190
Celotno besedilo (1,44 MB)
Gradivo ima več datotek! Več...

Ključne besede: pig meat, dry-fermented sausage, sensory characteristics, production system
Objavljeno v DiRROS: 06.09.2022; Ogledov: 466; Prenosov: 0

Povzetek: Increased frequency and severity of stressful events affects the growth patterns and functioning of trees which adjust their phenology to given conditions. Here, we analysed environmental effects (temperature, precipitation, VPD and SWC) on the timing of leaf phenology, seasonal stem radial growth patterns, and xylem and phloem anatomy of Quercus pubescens in the sub-Mediterranean in the period 2014%2019, when various adverse weather events occurred, i.e. spring drought in 2015, summer fire in 2016 and summer drought in 2017. Results showed that the timings of leaf and cambium phenology do not occur simultaneously in Q. pubescens, reflecting different environmental and internal constraints. Although year-to-year variability in the timings of leaf and cambial phenology exists, their chronological sequence is fairly fixed. Different effects of weather conditions on different stages of leaf development in spring were observed. Common climatic drivers (i.e., negative effect of hot and dry summers and a positive effect of increasing moisture availability in winter and summer) were found to affect the widths of xylem and phloem increments with more pronounced effect on late formed parts. A legacy effect of the timing of leaf and cambial phenology of the previous growing season on the timing of phenology of the following spring was confirmed. Rarely available phloem data permitted a comprehensive insight into the interlinkage of the timing of cambium and leaf phenology and adjustment strategies of vascular tissues in Mediterranean pubescent oak to various environmental constraints, including frequent extreme events (drought, fire). Our results suggest that predicted changes in autumn/winter and spring climatic conditions for this area could affect the timings of leaf and stem cambial phenology of Q. pubescens in the coming years, which would affect stem xylem and phloem structure and hydraulic properties, and ultimately its performance.
Ključne besede: pubescent oak, leaf development, radial growth, initial earlywood vessel, sieve tube, anatomy, cambial cell production, extreme weather events
Objavljeno v DiRROS: 06.09.2021; Ogledov: 975; Prenosov: 292
Celotno besedilo (7,00 MB)
Gradivo ima več datotek! Več...

Povzetek: The aim of our research was to study the impact of various environmental factors on the resin production of pines in the Slovenian Karst. Five plots were established % three in Pinus nigra (Arnold) stands and two in Pinus sylvestris (L.) stands. On each plot, the 19-20 most vigorous dominant or codominant trees with a minimum diameter at breast height (DBH) of 20 cm were selected and their resin yield analysed in 2012. Resin yield in P. nigra was considerably higher than that in P. sylvestris. The average resin yield per tree during the study period of 102 days was 1.144 kg for P. nigra and 0.612 for P. sylvestris. There were substantial differences in resin yield among individual trees in the study period: 0.336-2.487 kg for P. nigra and 0.249-1.270 kg for P. sylvestris. The resin yield in P. nigra was considerably higher for the trees with larger DBH, while this was not the case in P. sylvestris. Tree species was the most important factor in resin yield. Increased precipitation resulted in higher resin yields on most plots, whereas better site productivity positively affected resin yield on all P. nigra plots but not on P. sylvestris plots.
Ključne besede: Black pine, Scots pine, resin production, resin yield, Slovenian Karst
Objavljeno v DiRROS: 05.07.2018; Ogledov: 5026; Prenosov: 3293
Celotno besedilo (1,78 MB)
Gradivo ima več datotek! Več...