21. Good survival of broadleaf tree species in a four-year-old plantation in the Slovenian KarstNina Škrk, Kristjan Jarni, Robert Brus, 2022, original scientific article Abstract: Six broadleaf tree species (Celtis australis L. – Mediterranean hackberry, Quercus petraea (Matt.) Liebl. – sessile oak, Fagus sylvatica L. – European beech, Prunus avium L. – wild cherry, Juglans regia L. – Persian walnut and Acer pseudoplatanus L. – sycamore maple) were planted in 2012 in a trial in the Slovenian Karst on two sites differing in productivity to test their suitability for use in the conversion of old pine stands into ecologically more stable broadleaf forests and to investigate their possible response to the harsher growth conditions predicted in the future. The selected economically interesting tree species have higher timber quality than broadleaves which regenerate naturally (e.g., Ostrya carpinifolia, Fraxinus ornus, Quercus cerris). Measurements were taken in 2017, after four growth seasons. All planted species except Fagus sylvatica had a high survival rate. In total, 70% of all seedlings survived, which shows promising potential. The survival rate was higher at the site on flat terrain than at the site on a slope. Prunus avium was the most successful of all planted species in terms of survival rate, at 83%, and other measured parameters (height, height increment, stem diameter, vitality and quality), and Fagus sylvatica was the least successful, with a survival rate of only 20%. Celtis australis had the highest survival rate, at 87%. Acer pseudoplatanus had the largest differences in measured parameters between the more and less productive sites among all planted species. Quercus petraea showed high resistance to xeric conditions and is expected to be the most successful in conversions. All planted species except Fagus sylvatica show favourable initial potential for the future conversion of Karst pine forests. Keywords: forest conversion, broadleaves, survival rate, seedlings quality, climate change Published in DiRROS: 28.06.2022; Views: 2201; Downloads: 988 File (3,13 MB) |
22. Hands-on guidelines for private woodlot owners in Slovenia, Latvia, Estonia, Sweden and Spain2021, dictionary, encyclopaedia, lexicon, manual, atlas, map Keywords: Net4Forest, Erasmus+, quality classes, wood defects, quality wood, forest fires, roundwood sales Published in DiRROS: 22.03.2021; Views: 868; Downloads: 490 Full text (6,55 MB) This document has many files! More... |
23. Documenting metrological traceability as intended by ISO 15189:2012 : a consensus statement about the practice of the implementation and auditing of this norm elementMarc H. M. Thelen, Florent Vanstapel, Pika Meško-Brguljan, Bernard Gouget, Guilaine Boursier, Edward Barrett, Christos Kroupis, Maria Lohmander, Luděk Šprongl, Tatjana Vodnik, 2019, original scientific article Abstract: ISO15189:2012 requires medical laboratories to document metrological traceability of their results. While the ISO17511:2003 standard on metrological traceability in laboratory medicine requires the use of the highest available level in the traceability chain, it recognizes that for many measurands there is no reference above the manufacturer's selected measurement procedure and the manufacturer's working calibrator. Some immunoassays, although they intend to measure the same quantity and may even refer to the same reference material, unfortunately produce different results because of differences in analytical selectivity as manufacturers select different epitopes and antibodies for the same analyte. In other cases, the cause is the use of reference materials, which are not commutable. The uncertainty associated with the result is another important aspect in metrological traceability implementation. As the measurement uncertainty on the clinical samples is influenced by the uncertainty of all steps higher in the traceability chain, laboratories should be provided with adequate and appropriate information on the uncertainty of the value assignment to the commercial calibrators that they use. Although the between-lot variation in value assignment will manifest itself as part of the long-term imprecision as estimated by the end-user, information on worst-case to be expected lot-lot variation has to be communicated to the end-user by the IVD provider. When laboratories use ancillary equipment that potentially could have a critical contribution to the reported results, such equipment needs verification of its proper calibration and criticality to the result uncertainty could be assessed by an approach based on risk analysis, which is a key element of ISO15189:2012 anyway. This paper discusses how the requirement for metrological traceability as stated in ISO15189 should be met by the medical laboratory and how this should be assessed by accreditation bodies. Keywords: laboratories, medical laboratory science, risk management, quality control, quality improvement, health care quality assurance, metrological traceability Published in DiRROS: 22.10.2020; Views: 1297; Downloads: 285 Link to file |
24. |
25. Factors influencing growth of mature sycamore trees (Acer pseudoplatanus L.) on carbonate bedrockAleš Kadunc, Marijan Kotar, 2005, original scientific article Abstract: This paper presents the growth potential of sycamore (Acer pseudoplatanus L.) on four types of forest sites located on carbonate bedrock. The research covers sycamore sites (Aceri-Fraxinetum ill.), beech sites (Lamio orvalae-Fagetum), beech sites planted with Norway spruce, and silver fir-beechsites (Omphalodo-Fagetum aceretosum). The analyses for each forest type were carried out on five plots. Our aim was to determine the effect of site factors and stand parameters on sycamore growth. Site productivity (SP) is positively correlated with soil depth, coarse silt percentage in the cambichorizon, the content of phosphorus in leaves and, partly, with potassium. The effect of nitrogen supply on height growth or SP was not confirmed. Furthermore, height growth on sites with a higher rate of nutrient cycling, higher macronutrient supply and higher sand percentage in the cambic horizon is significantly faster. As to the growth of basal area, in addition to positive dependences of crown size, many other correlations with site factors were confirmed. Keywords: beech stand, growing stock, stand value, current volume increment, current value increment, quality structure, social collective Published in DiRROS: 12.07.2017; Views: 4480; Downloads: 1827 Full text (185,52 KB) |
26. Amino- and ionic liquid-functionalised nanocrystalline ZnO via silane anchoring - an antimicrobial synergyMarjeta Čepin, Vasko Jovanovski, Matejka Podlogar, Zorica Crnjak Orel, 2015, original scientific article Abstract: Temperature has critical impact on food quality and
safety within food supply chain, therefore, food should
be kept at the defined storage temperature range.
Final consumer should be assured when buying food
about actual temperature and thermal history of the
selected food product and this is why it should be indicated
on the packed or prepacked item.
The chromogenic temperature indicator for cold food
chain was prepared from suitable active material
packed in the properly structured holder. When temperature
rises above the defined storage temperature,
the active material changes colour and physical state
(solid/liquid). Simultaneously, special packaging structure
enables irreversible recording of the time exposed
to the elevated temperature. The active material was
made of thermochromic composite, consisting of dye,
developer and solvent. It changes colour at its melting
point, being coloured below and discoloured above
it. The temperature is called activation temperature of
the composite. Its value was adjusted by appropriate
solvent and additives used for preparation of the composite,
to reach the desired value. The temperature
dependent colour change of the composite was determined
by colorimetric measurements. The conditions
for best observation of the change by naked eye were
also examined. The structure of the active material’s
holder was analyzed for best displaying of the time
spend at high temperature (above the activation temperature).
Functioning of the indicator was examined with
growth of pathogens as a function of migration of
the active material at temperature above the required
storage temperature of the food. It was found out that
the described chromogenic temperature indicator for
cold food chain shows the thermal history of food storage
by colour-, phase- and migration changes of the
active composite material and consequently would be
reliable as indicator in cold food chain to indicate temperature
abuse and would disclose potential growth of
psychrophilic microorganisms. Keywords: Chromogenic temperature indicator, Food
cold chain, Food quality and safety, Temperature control, Thermal history Published in DiRROS: 16.12.2014; Views: 6198; Downloads: 955 Link to full text |