Search the repository

A+ | A- | | SLO | ENG

Abstract: Polyurethane foam (PUR) is a lightweight, thermally insulating, widely used, and highly flammable material that has after its use an adverse effect on the environment, i.e., PUR disposal is considered hazardous. Its flammability can be mitigated using various fire retardants, but they do not change the hazardous nature of waste PUR. Therefore, in the current study, waste PUR with and without flame retardants based on N and P was incorporated into a geopolymer, the alkali-activated material (AAM) based solely on metakaolin, to evaluate the potential recycling route of waste PUR while taking into account its flammability, so it can enter safely into the circular economy through the building industry. To enhance the mechanical properties of the composite, a fresh mixture was irradiated with microwaves. However, the irradiation of geopolymer containing PUR negatively influenced mechanical performance, which led to the evaluation of the behaviour of the complex dielectric constant of PUR and fire retardants. Materials and composites were evaluated regarding their chemistry, mineralogy, microstructure, and porosity to connect the structure with extrinsic properties like geometrical density, thermal conductivity, and fire properties. Nonetheless, positive influences of PUR being encapsulated in the geopolymer were lowered density (from 1.8 to 1.6 kg/l) and improved thermal insulation ability (from 940 to 860 mW/(m·K)) of the composites: with the inclusion of <5 % of PUR, thermal insulation improved by nearly 10 %. However, the contribution of PUR to the composite originated from its skeleton, which has more than 15 times bigger geometrical density (0.81 kg/l) compared to the density of the skeleton (0.047 kg/l). This offers an open field for further advancements of thermal properties, but would also lead to a decrease of the compressive strength, which was already lowered from 90 MPa for 30 % with <5 % of added grated PUR. Furthermore, the flammable nature of PUR and its other drawbacks can be controlled by permanent embedding in the noncombustible structure of geopolymer, making the envelope of sustainable buildings green and safer. Overall, including grated waste PUR in geopolymer represents a promising, easy, cost-effective recycling path with low energy consumption, where the composite cannot develop fire on a scale of pure PUR, even in the worst-case scenario, but only if the composite is designed in a way, that flammable materials cannot join flames during their combustion. This paper gives prospects to other flammable waste materials to be safely used in the circular economy, and to porous materials to shape properties of the composite by their intrinsic and/or extrinsic properties.
Keywords: waste polyurethane foam, polymeric flame retardants, alkali activated material, metakaolin, microwave irradiation, thermal-fire behaviour, mechanical strength
Published in DiRROS: 01.03.2024; Views: 197; Downloads: 176
Full text (29,74 MB)
This document has many files! More...

Abstract: A novel environmentally friendly method for in situ formation of CaCO3 deep inside a wood’s structure is presented. The method is based on vacuum-pressure impregnation using a one-component treatment medium – a water solution of calcium acetoacetate - and a single stage process to significantly improve the fire retardancy of the treated material.
Keywords: mineralisation, flame retardancy, calcium acetoacetate, calcium carbonate, wood
Published in DiRROS: 31.07.2023; Views: 292; Downloads: 208
Full text (2,69 MB)
This document has many files! More...

Abstract: The ISO 5660-1 cone calorimeter is an affordable, practical, and commonly used solution for the measurement of main fire properties of products and materials. Among its chief drawbacks is its limited ability to reproduce combustion conditions found in real fires. This deficiency is mainly due to its inability to control oxygen availability in order to simulate an underventilated fire. As several toxic or potentially toxic species are formed primarily in oxygen-poor conditions, the controlled atmosphere cone calorimeter (CACC), now defined in ISO 5660-5, is a major improvement when trying to study the toxicity of fire effluents. A proposed additional modification of the CACC via the introduction of chimney sampling ports and oxygen sensors improves the reproducibility and veracity of effluent sampling. This approach allows the implementation of various techniques to sample, collect, and analyze the generated fire effluents. In this study, the experimental set-up was used to capture fire effluents generated by burning wood under different ventilation conditions. A gas chromatograph coupled with mass spectrometer was used to assess and compare the chemical composition of the collected samples. The results obtained with the new experimental set-up proved the ability of the system to reproducibly generate fire effluents under various controlled burning circumstances. It could prove useful as a tool in characterizing the toxicity of fire effluents from various materials on a benchtop scale and ultimately contribute data for the numerical modeling of toxicity of fire effluents in real buildings.
Keywords: modified cone calorimeter, controlled atmosphere, wood, fire effluents, open access
Published in DiRROS: 14.07.2023; Views: 320; Downloads: 209
Full text (1,67 MB)
This document has many files! More...

Abstract: In the presented work, the influence of two flame retardants—ammonium polyphosphates and 2,4,6-triamino-1,3,5-triazine on the polyurethane foam (PUR) systems were studied. In this paper, these interactive properties are studied by using the thermal analytical techniques, TGA and DTA, which enable the various thermal transitions and associated volatilization to be studied and enable the connection of the results with thermal and mechanical analysis, as are thermal conductivities, compression and bending behavior, hardness, flammability, and surface morphology. In this way, a greater understanding of what the addition of fire retardants to polyurethane foams means for system flammability itself and, on the other hand, how this addition affects the mechanical properties of PUR may be investigated. It was obtained that retardants significantly increase the fire resistance of the PURs systems while they do not affect the thermal conductivity and only slightly decrease the mechanical properties of the systems. Therefore, the presented systems seem to be applicable as thermal insulation where low heat conductivity coupled with high flame resistance is required.
Keywords: flammability, polyurethane polymer, foams, thermal conductivity, mechanical properties, open access
Published in DiRROS: 08.06.2023; Views: 339; Downloads: 166
Full text (10,71 MB)
This document has many files! More...