Digital repository of Slovenian research organisations

Search the repository
A+ | A- | Help | SLO | ENG

Query: search in
search in
search in
search in

Options:
  Reset


Query: "author" (Klemen %C4%8Cernel%C4%8D) .

11 - 20 / 92
First pagePrevious page12345678910Next pageLast page
11.
Temporal and spatial variability of phloem structure in Picea abies and Fagus sylvatica and its link to climate
Jožica Gričar, Jernej Jevšenak, Kyriaki Giagli, Klemen Eler, Dimitrios Tsalagkas, Vladimir Gryc, Hanuš Vavrčík, Katarina Čufar, Peter Prislan, 2024, original scientific article

Abstract: Using a unique 8-year data set (2010–2017) of phloem data, we studied the effect of temperature and precipitation on the phloem anatomy (conduit area, widths of ring, early and late phloem) and xylem-ring width in two coexisting temperate tree species, Picea abies and Fagus sylvatica, from three contrasting European temperate forest sites. Histometric analyses were performed on microcores taken from tree stems in autumn. We found high interannual variability and sensitivity of phloem anatomy and xylem-ring widths to precipitation and temperature; however, the responses were species- and site-specific. The contrasting response of xylem and phloem-ring widths of the same tree species to weather conditions was found at the two Slovenian sites generally well supplied with precipitation, while at the driest Czech site, the influence of weather factors on xylem and phloem ring widths was synchronised. Since widths of mean annual xylem and phloem increments were narrowest at the Czech site, this site is suggested to be most restrictive for the radial growth of both species. By influencing the seasonal patterns of xylem and phloem development, water availability appears to be the most important determinant of tissue- and species-specific responses to local weather conditions.
Keywords: wood anatomy, early phloem, European beech, late phloem, Norway spruce, sieve element area, xylem-ring width
Published in DiRROS: 19.01.2024; Views: 234; Downloads: 102
.pdf Full text (5,31 MB)
This document has many files! More...

12.
O domorodnosti alpskega kozoroga v Sloveniji
Andreja Nève Repe, Elena Bužan, Borut Toškan, Jernej Javornik, Boštjan Pokorny, Andrej Arih, Lars Zver, Maruša Prostor, Miha Krofel, Matija Stergar, Klemen Jerina, Hubert Potočnik, Rok Černe, Aleš Poljanec, 2023, professional article

Abstract: Alpski kozorog (Capra ibex) je alpski endemit. Na območju Slovenije naj bi bila vrsta iztrebljena v drugi polovici 17. stoletja, globalno pa je bila zaradi prelova na robu izumrtja konec 19. stoletja. Preživela je le populacija na širšem območju parka Gran Paradiso na skrajnem zahodu Alp v Italiji. Zaradi naselitev in drugih varstvenih programov sedaj alpski kozorog živi v celotnih Alpah, vključno s Slovenijo. Vendar pri nas njegove populacije nazadujejo in so v zelo slabem stanju, kar je lahko rezultat več dejavnikov. Malo izvornih osebkov ob naselitvah, zgodovinska ozka grla in ločenost kolonij so povzročili parjenje v sorodstvu, kar je slabšalo genetsko stanje populacij in lahko negativno vpliva tudi na demografijo. K številčnemu zmanjševanju vrste so lahko prispevale tudi bolezni. Za dolgoročno ohranitev alpskega kozoroga v Sloveniji so nujni takojšnji aktivni ohranitveni ukrepi, pogoj pa je ustrezna opredelitev izvornosti vrste, saj je (bila) zaradi prejšnjih pomanjkljivih podatkov umeščena med tujerodne. V prispevku na podlagi arheo-zooloških, genetskih in preliminarnih habitatnih analiz utemeljujemo, da je v Sloveniji kozorog domorodna vrsta. V raziskavah smo pokazali, da je vrsta živela na ozemlju zdajšnje Slovenije v poznoantičnem in zgodnje srednjeveškem obdobju. Preliminarno smo določili tudi primernost in povezanost habitata kozoroga v slovenskem alpskem svetu ter nakazali verjetne potrebne ukrepe za ohranitev vrste v Sloveniji.
Keywords: Capra ibex, izvornost vrste, programi varstva, Alpe, habitat, genetika
Published in DiRROS: 09.01.2024; Views: 263; Downloads: 74
.pdf Full text (475,48 KB)

13.
Antibacterial effect of polymethyl methacrylate resin base containing TiO2 nanoparticles
Anamarija Zore, Anže Abram, Aleksander Učakar, Ivo Godina, Franc Rojko, Roman Štukelj, Andrijana Sever Škapin, Rajko Vidrih, Olivera Dolić, Valentina Veselinović, Klemen Bohinc, 2022, original scientific article

Abstract: Restorations in dentistry must reproduce the aspect of the patient’s natural teeth and require non-toxicity, biocompatibility, and good mechanical properties in order to last longer. Restorations are permanently in contact with microbes that can adhere to and form biofilms. The purpose of this study was to determine the adhesion extent of Streptococcus mutans to polymethyl methacrylate (PMMA) resin base containing TiO2 nanoparticles. To understand the adhesion of Streptococcus mutans on the modified resin-based surfaces, the following surface properties were measured: the roughness, contact angle, zeta potential and CIE color parameters. Evaluation of tensile stress performance in TiO2 modified PMMA showed that the maximum tensile stress of the modified PMMA resin decreases with an increasing amount of TiO2 nanoparticles. The increasing amount of TiO2 decreases the roughness and causes contact angles in the border between hydrophilic and hydrophobic surfaces. All the studied surfaces are negatively charged and added TiO2 tends to increase the zeta potential. The addition of TiO2 nanoparticles increases the lightness and decreases the intensity of the red and yellow color. The increasing addition of TiO2 nanoparticles into PMMA increases the morphological change of bacterial cells.
Keywords: bacterial adhesion, Streptococcus mutans, polymethyl methacrylate resin, TiO2, surface properties
Published in DiRROS: 20.12.2023; Views: 170; Downloads: 86
.pdf Full text (14,32 MB)
This document has many files! More...

14.
Zagotavljanje migracijskih koridorjev za prostoživeče živali na območju železniške infrastrukture
Samar Al Sayegh-Petkovšek, Klemen Kotnik, 2023, review article

Abstract: Železniški transport je okoljsko in ekonomsko sprejemljivejši od drugih vrst kopenskega transporta, vendar lahko negativno vpliva na prostoživeče živali, saj pomeni oviro za njihovo gibanje (barierni učinek) ter neposredno povečuje umrljivost zaradi trkov z vlaki. Zaradi tovrstnih vplivov je smiselno načrtovati in implementirati omilitvene ukrepe, ki zagotavljajo ekološko povezljivost in zmanjšujejo umrljivost prostoživečih živali na območju železniške infrastrukture. Ukrepi morajo biti usmerjeni predvsem k preprečevanju vstopanja in zadrževanja živali na območju železniških tirov, saj se vlaki praviloma ne morejo izogniti trku. Še posebej primerni so omilitveni ukrepi, ki zmanjšujejo število trkov in ne povečujejo bariernega učinka. V preglednem članku smo se osredotočili na ukrepe, ki so bili obravnavani oz. implementirani na območju železniške infrastrukture in na novejše raziskave, v okviru katerih so preverjali možnost uporabe alternativnih omilitvenih ukrepov, npr. opozorilnih sistemov, testiranih v Kanadi in na Švedskem. V drugem delu prispevka predstavljamo predlog protokola za zagotovitev migracijskih koridorjev na območju železnice, ki smo ga oblikovali na podlagi relevantne tuje literature in lastnih izkušenj, pridobljenih z načrtovanjem in spremljanjem ukrepov za zmanjšanje povoza prostoživečih živali (s poudarkom na parkljarjih) na cestah, hitrih cestah ter avtocestah in z analizo povozov na območju slovenske železniške infrastrukture v izbranem petletnem obdobju.
Keywords: migracijski koridorji, železniška infrastruktura, barierni učinek, protokol, omilitveni ukrepi, trki prostoživečih živali z vlaki
Published in DiRROS: 30.11.2023; Views: 525; Downloads: 156
.pdf Full text (2,58 MB)

15.
Entering voltage hysteresis in phase-separating materials : revealing the electrochemical signature of the intraparticle phase-separated state
Tomaž Katrašnik, Jože Moškon, Klemen Zelič, Igor Mele, Francisco Ruiz-Zepeda, Miran Gaberšček, 2023, original scientific article

Abstract: Hysteresis is a general phenomenon regularly observed in various materials. Usually, hysteretic behavior is an intrinsic property that cannot be circumvented in the non-equilibrium operation of the system. Herein, we show that, at least with regard to the hysteretic behavior of phase-separating battery materials, it is possible to enter (deeply) the hysteretic loop at finite battery currents. This newly observed electric response of the electrode, which is inherent to phase-separating materials, is, for the first time, related to its microscopic origin arising from a (significant) share of the active material residing in an intraparticle phase-separated state. This intriguing observation was further generalized by revealing that a phase-separating material can feature (significantly) different chemical potentials at the same bulk lithiation level and temperature when exposed to the same finite current and external voltage hysteresis. Therefore, the intraparticle phase-separated state significantly affected the DC and AC characteristics of the battery. The experimental evidence for entering the intraparticle phase-separated state is supported by thermodynamic reasoning and advanced modeling. The current findings will help advance the understanding, control, diagnostics, and monitoring of batteries composed of phase-separating materials while also providing pertinent motivation for the enhancement of battery design and performance.
Keywords: battery, phase-separating materials, Lithium iron phosphate, voltage hysteresis, intraparticle phase-separated
Published in DiRROS: 06.09.2023; Views: 354; Downloads: 171
.pdf Full text (5,07 MB)
This document has many files! More...

16.
Antifungal effect of polymethyl methacrylate resin base with embedded Au nanoparticles
Ivan Marić, Anamarija Zore, Franc Rojko, Andrijana Sever Škapin, Roman Štukelj, Aleksander Učakar, Rajko Vidrih, Valentina Veselinović, Marijan Gotić, Klemen Bohinc, 2023, original scientific article

Abstract: Full and partial restorations in dentistry must replicate the characteristics of the patient’s natural teeth. Materials must have good mechanical properties and be non-toxic and biocompatible. Microbes, which can form biofilms, are constantly in contact with restorations. In this study, we investigate how well Candida albicans adheres to a polymethyl methacrylate (PMMA) resin base with gold (Au) nanoparticles. We synthesized Au nanoparticles and characterized them. The average size of Au nanoparticles embedded in PMMA was 11 nm. The color difference ∆E between PMMA and PMMA/Au composites was 2.7 and was still esthetically acceptable to patients. PMMA/Au surfaces are rougher and more hydrophilic than pure PMMA surfaces, and the isoelectric point of both types of surfaces was 4.3. Above the isoelectric point, PMMA/Au surfaces are more negatively charged than PMMA surfaces. The added Au nanoparticles decreased the tensile strength, while the hardness did not change significantly. Adhesion measurements showed that PMMA surfaces modified with Au nanoparticles reduced the extent of microbial adhesion of Candida albicans.
Keywords: fungal adhesión, C. albicans, polymethyl methacrylate resin, Au, surface properties, composites
Published in DiRROS: 24.07.2023; Views: 367; Downloads: 145
.pdf Full text (2,90 MB)
This document has many files! More...

17.
Triquinoxalinediol as organic cathode material for rechargeable aqueous zinc-ion batteries
Svit Menart, Klemen Pirnat, David Pahovnik, Robert Dominko, 2023, original scientific article

Published in DiRROS: 28.06.2023; Views: 354; Downloads: 162
.pdf Full text (1,45 MB)
This document has many files! More...

18.
Biophysical properties of foamed and solid polymers used in orthotics and prosthetics
Klemen Bohinc, Anže Abram, Anamarija Zore, Roman Štukelj, Ana Lenarčič, Rajko Vidrih, Andrijana Sever Škapin, 2021, original scientific article

Abstract: Orthotic and prosthetic materials should have good mechanical and antibacterial properties. Therefore, in our study, we consider four common foamed closed-cells and two solid polymeric materials regarding their mechanical behaviour and tendency for bacterial adhesion. For all materials, the surface roughness, hydrophobicity, zeta potential, tensile properties, hardness and CIE color parameters were measured. We found that foamed polymeric materials have higher roughness, higher hydrophobicity, lower Young's modulus, lower maximum tensile strength and lower hardness than solid materials. Bacterial adhesion test measurements based on observation by scanning electron microscopy show much a lower adhesion extent of S. aureus on solid materials than on foamed materials. The measured biophysical properties could be the key data for users to select the optimal materials.
Keywords: surface characterization, bacterial adhesion, foamed materials, prosthetic and orthotic material, surfaces
Published in DiRROS: 22.05.2023; Views: 274; Downloads: 174
.pdf Full text (3,14 MB)
This document has many files! More...

19.
The effects of large-scale forest disturbances on hydrology : an overview with special emphasis on karst aquifer systems
Urša Vilhar, Janez Kermavnar, Erika Kozamernik, Metka Petrič, Nataša Ravbar, 2022, original scientific article

Abstract: Large-scale forest disturbances (LSFD) are an essential component of forest ecosystem dynamics. The effects of rapid loss of forest cover and other changes in forest ecosystems are inextricably linked to hydrologic processes such as evapotranspiration, soil and recharge processes. Among all hydrogeological systems, karst aquifers are important because of their exceptionally rich and unique biodiversity, biomass, and groundwater resources. At the same time, they are characterized by specific hydrological processes that make them highly vulnerable to environmental changes. Therefore, this study paid special attention to the effects of LSFD on karst hydrology. Using the PRISMA checklist, a thorough literature review of studies published between 2001 and 2020 was compiled into a comprehensive matrix dataset. In addition, an initial assessment of the global and regional distribution of forests on carbonate rocks was made based on publicly available geodatabases of forests and karst aquifers. The compiled information provides the first global overview of hydrological processes affected by LSFD, and identifies important knowledge gaps and future research challenges. The matrix dataset contained 117 full-text articles with a total of 160 case studies. Most publications were from 2011 to 2017, with more than half of the studies at the plot level and more than one-third at the catchment level. Studies on the effects of fires and pest and diseases infestations predominated. However, no articles were found on the effects of ice storms on hydrology in general or on the effects of pest and disease infestations on hydrology in karst areas. Of the 45.6 M km2 of forested land worldwide, 6.3 M km2 or 13.9% of all forests are underlain by carbonate rocks. Carbonate rocks cover about 15% of the land surface, which means that 31.3% of the world's karst aquifers are covered by forest. 29% of all case studies were conducted in karst areas, which is a high proportion compared to the proportion of forests in karst areas. However, these studies are unevenly distributed geographically. Most studies were conducted at the plot level, and only 21% of studies focused on natural LSFD, so forest management and land use change studies predominated. Although studies on the effects of LSFD on evapotranspiration processes between vegetation, air and soil are fairly well represented, infiltration and recharge processes in karst areas remain poorly understood and knowledge is lacking, particularly on groundwater flow and related hydrological processes. Regional studies and impacts on groundwater resources are also insufficient. The results indicate an urgent need for an integrated holistic interdisciplinary approach and a comprehensive understanding of the individual influencing factors, which would allow more accurate modelling of hydrological processes in forested karst aquifers.
Keywords: natural disasters, climatic changes, evapotranspiration, hydrology, karst aquifers
Published in DiRROS: 19.05.2023; Views: 374; Downloads: 214
.pdf Full text (16,50 MB)
This document has many files! More...

20.
Search done in 0.28 sec.
Back to top