101. Single-layer and double-layer filtration materials based on polyvinylidene fluoride-co-hexafluoropropylene nanofibers coated on melamine microfibersTilen Potisk, Maja Remškar, Luka Pirker, Gregor Filipič, Igor Mihelič, Marjan Ješelnik, Urban Čoko, Miha Ravnik, 2023, original scientific article Keywords: nanofibers, aerosols, filtration
Published in DiRROS: 15.09.2023; Views: 279; Downloads: 158
 Full text (2,07 MB)
This document has many files! More... |
102. |
103. |
104. |
105. |
106. RILEM TC 247-DTA round robin test : mix design and reproducibility of compressive strength of alkaliactivated concretesJohn L. Provis, Kamel Arbi, Susana Bernal, Dali Bondar, Anja Buchwald, Arnaud Castel, Sundararaman Chithiraputhiran, Martin Cyr, Alireza Dehghan, Katja Dombrowski-Daube, Ashish Dubey, Vilma Ducman, Gregor J. G. Gluth, Sreejith Nanukuttan, Karl Peterson, Francisca Puertas, Arie van Riessen, Manuel Torres-Carrasco, Guang Ye, Yibing Zuo, 2019, original scientific article Abstract: The aim of RILEM TC 247-DTA Durability Testing of Alkali-Activated Materials is to identify and validate methodologies for testing the durability of alkali-activated concretes. To underpin the durability testing work of this committee, five alkali-activated concrete mixes were developed based on blast furnace slag, fly ash, and flash-calcined metakaolin. The concretes were designed with different intended performance levels, aiming to assess the capability of test methods to discriminate between concretes on this basis. A total of fifteen laboratories worldwide participated in this round robin test programme, where all concretes were produced with the same mix designs, from single-source aluminosilicate precursors and locally available aggregates. This paper reports the mix designs tested, and the compressive strength results obtained, including critical insight into reasons for the observed variability in strength within and between laboratories.
Keywords: alkali-activated materials (AAM), mechanical properties, test method, Rilem TC, durability
Published in DiRROS: 14.09.2023; Views: 245; Downloads: 144
Full text (431,19 KB)
This document has many files! More... |
107. Monitoring and control of forest seedling quality in EuropeMilan Mataruga, Branislav Cvjetković, Bart De Cuyper, Ina Aneva, Petr Zhelev, Pavel Cudlin, Marek Metslaid, Ville Kankaanhuhta, Catherine Collet, Peter Annighöfer, Gregor Božič, Hojka Kraigher, 2023, original scientific article Abstract: The relationship between the quality of forest seedlings and their outplanting survival and growth has long been recognized. Various attributes have been proposed to measure the quality of planted seedlings in forest regeneration projects, ranging from simple morphological traits to more complex physiological and performance attributes, or a combination thereof. However, the utility and meaning of seedling quality attributes can differ significantly among regions, nursery practices, site planting conditions, species and the establishment purpose. Here, forest scientists compiled information using a common agreed questionnaire to provide a review of current practices, experiences, legislation and standards for seedling quality across 23 European countries.
Large differences exist in measuring seedling quality across countries. The control of the origin of seed and vegetative material (genetic component of plant quality), and control of pests and diseases are common practices in all countries. Morphological attributes are widely used and mandatory in most cases. However, physiological attributes are hardly used at the operative level and mainly concentrated to Fennoscandia. Quality control legislation and seedling quality standards are less strict in northern European countries where seedling production is high, and quality control relies more on the agreements between producers and local plant material users. In contrast, quality standards are stricter in Southern Europe, especially in the Mediterranean countries.
The control of seedling quality based on plantation and reforestation success is uncommon and depends on the conditions of the planting site, the traditional practices and the financial support provided by each country. Overall, European countries do not apply the “target seedling concept” for seedling production except for seed origin. Seedling production in many countries is still driven by traditional “know-how” and much less by scientific knowledge progress, which is not adequately disseminated and transferred to the end-users.
Our review highlights the need for greater harmonization of seedling quality practices across Europe and the increased dissemination of scientific knowledge to improve seedling quality in forest regeneration activities.
Keywords: forest nursery, forestation, legislation, morphological and physiological quality, standards, forest reproductive material, FRM
Published in DiRROS: 04.09.2023; Views: 315; Downloads: 168
 Link to file
This document has many files! More... |
108. Quality control of thermally modified timber using dynamic vapor sorption (DVS) analysisMiha Humar, Rožle Repič, Davor Kržišnik, Boštjan Lesar, Romana Cerc Korošec, Christian Brischke, Lukas Emmerich, Gregor Rep, 2020, original scientific article Abstract: The importance of thermal modification is increasing worldwide. Increased use of thermally modified timber (TMT) has resulted in a need for reliable quality control, comprising control of variation of the production within defined limits, allowing third-party control in the case of certification and the regulation of customer complaints and claims. Techniques are thus needed to characterise the modification of quality in terms of improved target properties of TMT during industrial production, and of TMT products that have been in service for an arbitrary time. In this study, we aimed to utilise dynamic vapor sorption (DVS) for this purpose. Norway spruce (Picea abies) and European beech (Fagus sylvatica) samples were thermally modified at different temperatures according to different heat treatment techniques: (1) the Silvapro process based on an initial vacuum; (2) an air heat treatment, whereby samples were wrapped in aluminium foil; (3) thermal modification of wood samples in the ambient atmosphere in a laboratory oven. Wood samples from closed processes were analysed for validation. TMT was characterised with respect to mass loss, colour and density. Mass loss of wood due to modification (MLTM) was correlated with factors derived from DVS analysis. The present DVS measurements suggest that the equilibrium wood moisture content (EMC95% RH), the time to reach 10% wood moisture content (t10% MC), and the elongation factor, c, derived from a logarithmic function, can serve as alternative parameters to characterise the quality of several thermal modification processes. Further studies are recommended using other wood species, different modification processes and further parameters gained from DVS measurements to understand the robustness and the predictive power of the applied technique
Keywords: thermal modification, quality control, dynamic vapour sorption, wood, moisture content
Published in DiRROS: 31.08.2023; Views: 320; Downloads: 158
Full text (1,91 MB)
This document has many files! More... |
109. Depassivation and repassivation of stainless steels by stepwise pH changeEmir Mujanović, Bojan Zajec, Andraž Legat, Tadeja Kosec, Janez Kovač, Gregor Mori, Stefan Hönig, Gerald Zehethofer, 2020, original scientific article Abstract: Immersion tests with different stainless steels have been performed, while the pH was stepwise decreased and then increased again. During 8.5-day exposure, the depassivation and repassivation pH values as a function of pitting resistance equivalent number were determined. There is always a gap between both pH values (depassivation and repassivation), indicating that for every steel, there are conditions where an existing passive layer can be maintained but cannot be rebuilt after depassivation. In such environments, the passive layer is thicker, consisting mainly of molybdenum and iron rich oxides, while chromium is dissolved. Usually, depending on conditions, the passive layer is more chromium-rich, especially the inner layer. This is relevant, for example, for acidizing jobs in oil and gas industry, proving that repassivation after acidizing will happen promptly, when the pH is increased again.
Keywords: stress corrosion cracking, surface finish impact, tapered tensile specimen, autoclave, accelerated testing, light water nuclear reactor, critical threshold stress
Published in DiRROS: 30.08.2023; Views: 308; Downloads: 160
Full text (4,01 MB)
This document has many files! More... |
110. Recombination of oxygen atoms on the surface of oxidized polycrystalline nickel—temperature and pressure dependencesDomen Paul, Miran Mozetič, Rok Zaplotnik, Jernej Ekar, Alenka Vesel, Gregor Primc, Denis Đonlagić, 2023, original scientific article Abstract: The recombination of neutral oxygen atoms in the ground state on the oxidized nickel samples was studied experimentally in the range of pressures where the maximum density occurs in weakly ionized low-pressure oxygen plasma, i.e. between 40 and 200 Pa. The recombination coefficient was determined in the flowing afterglow. The source of oxygen atoms was plasma sustained in a quartz tube of inner diameter 4.7 mm by a microwave discharge in the surfatron mode. The recombination coefficient was determined in the afterglow chamber, which was a Pyrex tube with an inner diameter of 36 mm. The density of oxygen atoms in the afterglow chamber was varied by adjusting the discharge power, the gas flow, the pressure, and the position of a recombinator. Such flexibility of the experimental system enabled adjustment of the temperature of the oxidized nickel samples independently from the O-atom density in its vicinity or other parameters. The density of oxygen atoms in the afterglow chamber at various system parameters was determined by the Šorli method, which is reliable, and has an accuracy of about 20%. The recombination coefficient was determined by calorimetry. The coefficient was inversely proportional to the square root of the pressure and exponentially to the sample temperature. Systematic measurements performed at various pressures and temperatures enabled empirical formula, which were explained qualitatively by recombination kinetics.
Keywords: heterogenous surface recombination, recombination coefficient, nickel, nickel oxide, temperature
Published in DiRROS: 30.08.2023; Views: 350; Downloads: 204
Full text (2,44 MB)
This document has many files! More... |
