1. Use of steel slag for the synthesis of belite-sulfoaluminate clinkerLea Žibret, Martina Cvetković, Maruša Mrak, Mojca Loncnar, Andrej Ipavec, Sabina Dolenec, 2020, published scientific conference contribution Abstract: Belite-sulfoaluminate (BCSA) cements are low-carbon mineral binders, which require low energy consumption and allow the incorporation of various secondary raw materials in the clinker raw meal. In this study two types of unprocessed steel slags, coming from stainless steel production, were incorporated in the BCSA clinkers. The clinker phase composition, clinker reactivity, and the compressive strength of the cement were studied to evaluate the possible use of the slag in BCSA clinkers. The cement clinkers were synthesized by using natural raw materials, white titanogypsum, mill scale, as well as two different steel slags: (i) EAF S slag, which is a by-product of melting the recycled steel scrap in an electric arc furnace, and (ii) la dle slag as a by-product of the processes of secondary metallurgy, in various quantities. Raw mixtures with two different targeted phase compositions varying in belite, calcium sulfoaluminate and ferrite phases were sintered at 1250 °C. Clinker phases were determined by Rietveld quantitative phase analysis, while their distribution, morphology and incorporation of foreign ions in the phases were studied by SEM/EDS analysis. The clinker reactivity was determined by isothermal calorimetry. BCSA cements were prepared by adding titanogypsum. The compressive strength of the cement pastes was determined after 7 days of hydration. The presence of a predicted major clinker phases was confirmed by Rietveld analysis, however periclase was also detected. Microscopy revealed subhedral grains of belite and euhedral grains of calcium sulfoaluminate phases, while ferrite occurred as an interstitial phase. The results showed differences in the microstructure and reactivity of the clinker and cement, which can be attributed to varying amounts of ettringite due to different slag types
Keywords: belite-sulfoaluminate cement, cement clinker, steel slags, clinker microstructure, cement reactivity
Published in DiRROS: 19.01.2024; Views: 186; Downloads: 82
 Full text (18,89 MB)
This document has many files! More... |
2. Building of the Al-Containing secondary raw materials registry for the production of low CO2 mineral binders in South-Eastern European regionGorazd Žibret, Klemen Teran, Lea Žibret, Katarina Šter, Sabina Dolenec, 2021, original scientific article Abstract: The bottleneck in the process for increasing production of low CO2 mineral binders, based on BCSA (belite sulfoaluminate) clinkers, is the availability of Al-rich raw materials. For that purpose, a new registry of Al-containing secondary mineral residues (industrial and mine waste) has been developed and is presented in this paper. The methodology of creating the registry consists of three main steps: Gathering ideas, consolidation of ideas, and implementation. In order to achieve this, the following methodology was adopted: Analysis of similar registries by potential end-users and seeking potential solutions and tools to be used, and conducting 3 rounds of stakeholder consultations via workshops in order to determine crucial parameters and features the registry needs to contain. The key discussion points were about which data the registry needs to contain, who shall be the potential users, and what are the stakeholderʼs expectations from the registryʼs portal. Potential individual registry variables were identified as being relevant/irrelevant or available/unavailable, and potential solutions for the registrys sustainability were explored. Each Al-rich waste/residue data entry is divided into 10 slots, describing legal status, location, quantities, chemical (REE included), mineralogical, physical and radiological properties, life-cycle assessment, additional data, and data relevancy. The registry will act as a matchmaking tool between producers/holders of Al-rich secondary raw materials and potential producers of cement clinkers.
Keywords: cement, belite sulfoaluminate clinker, waste, by--product, deležniki
Published in DiRROS: 10.06.2022; Views: 528; Downloads: 319
Full text (2,23 MB)
This document has many files! More... |
3. The valorisation of selected quarry and mine waste for sustainable cement production within the concept of circular economyEmilija Fidanchevski, Katarina Šter, Maruša Mrak, Ljiljana Kljajević, Gorazd Žibret, Klemen Teran, Bojan Poletanovic, Monika Fidanchevska, Sabina Dolenec, Ildikó Merta, 2022, original scientific article Abstract: The cement industry could potentially consume large amounts of solid industrial waste in order to improve its sustainability. The suitability of selected quarry and mine waste as secondary raw materials (SRM) was examined for the sustainable production of cement following the concept of a circular economy. The chemical, mineralogical, and radiological characterization of SRM was conducted in this study. Its potential use in low-carbon and low-energy belite-sulfoaluminate cement was investigated by incorporating the examined SRM into cement clinker. Various characterization methods were used to characterize the cement, including X-ray powder diffraction (XRD), thermal analysis (DTA/TG), and isothermal calorimetry. Depending on the chemical composition of the waste, lower or higher amounts were allowed to be incorporated into the raw clinker mixture for a targeted clinker phase composition. Among the samples, differences were observed in the phase composition of synthesized clinkers, which slightly influenced the reactivity of the cement but did not significantly change the compressive strength of the final product.
Keywords: mineralne surovine, rudarski odpadki, rudniki, kamnolomi, cement, klinker, krožno gospodarstvo, BCSA clinker, cement, circular economy, clinker, mine wastes, quarry waste
Published in DiRROS: 10.06.2022; Views: 605; Downloads: 318
Full text (3,34 MB)
This document has many files! More... |
