Digital repository of Slovenian research organisations

Search the repository
A+ | A- | Help | SLO | ENG

Query: search in
search in
search in
search in

Options:
  Reset


Query: "author" (Janez Er%C5%BEen) .

141 - 150 / 523
First pagePrevious page11121314151617181920Next pageLast page
141.
142.
Flame retardant behaviour and physical-mechanical properties of polymer synergistic systems in rigid polyurethane foams
Branka Mušič, Nataša Knez, Janez Bernard, 2022, original scientific article

Abstract: In the presented work, the influence of two flame retardants—ammonium polyphosphates and 2,4,6-triamino-1,3,5-triazine on the polyurethane foam (PUR) systems were studied. In this paper, these interactive properties are studied by using the thermal analytical techniques, TGA and DTA, which enable the various thermal transitions and associated volatilization to be studied and enable the connection of the results with thermal and mechanical analysis, as are thermal conductivities, compression and bending behavior, hardness, flammability, and surface morphology. In this way, a greater understanding of what the addition of fire retardants to polyurethane foams means for system flammability itself and, on the other hand, how this addition affects the mechanical properties of PUR may be investigated. It was obtained that retardants significantly increase the fire resistance of the PURs systems while they do not affect the thermal conductivity and only slightly decrease the mechanical properties of the systems. Therefore, the presented systems seem to be applicable as thermal insulation where low heat conductivity coupled with high flame resistance is required.
Keywords: flammability, polyurethane polymer, foams, thermal conductivity, mechanical properties, open access
Published in DiRROS: 08.06.2023; Views: 393; Downloads: 178
.pdf Full text (10,71 MB)
This document has many files! More...

143.
144.
Environmental acceptability of geotechnical composites from recycled materials : comparative study of laboratory and field investigations
Marija Đurić, Vesna Zalar Serjun, Ana Mladenovič, Alenka Mauko Pranjić, Radmila Milačič, Janez Ščančar, Janko Urbanc, Nina Mali, Alenka Sešek Pavlin, Janez Turk, Primož Oprčkal, 2023, original scientific article

Abstract: The environmental properties of three geotechnical composites made by recycling wastes were investigated on a laboratory scale and in the field with the use of lysimeters designated for the revitalization of degraded mining sites. Composites were prepared by combining the mine waste with paper-mill sludge and foundry sand (Composite 1), with digestate from municipal waste and paper ash (Composite 2), and with coal ash, foundry slag and waste incineration bottom ash (Composite 3). The results of laboratory leaching tests proved that Composites 1 and 3 are envi- ronmentally acceptable, according to the legislative limits, as the potentially hazardous substances were immobilized, while in Composite 2, the legislative limits were exceeded. In the field lysimeters, the lowest rate of leaching was determined for optimally compacted Composites 1 and 3, while for Composite 2 the leaching of Cu was high. This study proved that optimally installed Composites 1 and 3 are environmentally acceptable for use in construction as an alternative to virgin materials, for the revitalization of degraded mining sites or, along with Composite 2, for closure operations with landfills. In this way, locally available waste streams are valorised and channelized into a beneficial and sustainable recycling practice.
Keywords: waste, recycling, lysimeter, potentiali hazardous substances, immobilization, revitalisation, environmental, open access
Published in DiRROS: 29.05.2023; Views: 345; Downloads: 253
.pdf Full text (3,42 MB)
This document has many files! More...

145.
Gozdarska tekmovanja v zimi 2023
Janez Konečnik, 2023, popular article

Keywords: gozdarska tekovanja, šport
Published in DiRROS: 19.05.2023; Views: 320; Downloads: 70
.pdf Full text (790,73 KB)

146.
The effects of large-scale forest disturbances on hydrology : an overview with special emphasis on karst aquifer systems
Urša Vilhar, Janez Kermavnar, Erika Kozamernik, Metka Petrič, Nataša Ravbar, 2022, original scientific article

Abstract: Large-scale forest disturbances (LSFD) are an essential component of forest ecosystem dynamics. The effects of rapid loss of forest cover and other changes in forest ecosystems are inextricably linked to hydrologic processes such as evapotranspiration, soil and recharge processes. Among all hydrogeological systems, karst aquifers are important because of their exceptionally rich and unique biodiversity, biomass, and groundwater resources. At the same time, they are characterized by specific hydrological processes that make them highly vulnerable to environmental changes. Therefore, this study paid special attention to the effects of LSFD on karst hydrology. Using the PRISMA checklist, a thorough literature review of studies published between 2001 and 2020 was compiled into a comprehensive matrix dataset. In addition, an initial assessment of the global and regional distribution of forests on carbonate rocks was made based on publicly available geodatabases of forests and karst aquifers. The compiled information provides the first global overview of hydrological processes affected by LSFD, and identifies important knowledge gaps and future research challenges. The matrix dataset contained 117 full-text articles with a total of 160 case studies. Most publications were from 2011 to 2017, with more than half of the studies at the plot level and more than one-third at the catchment level. Studies on the effects of fires and pest and diseases infestations predominated. However, no articles were found on the effects of ice storms on hydrology in general or on the effects of pest and disease infestations on hydrology in karst areas. Of the 45.6 M km2 of forested land worldwide, 6.3 M km2 or 13.9% of all forests are underlain by carbonate rocks. Carbonate rocks cover about 15% of the land surface, which means that 31.3% of the world's karst aquifers are covered by forest. 29% of all case studies were conducted in karst areas, which is a high proportion compared to the proportion of forests in karst areas. However, these studies are unevenly distributed geographically. Most studies were conducted at the plot level, and only 21% of studies focused on natural LSFD, so forest management and land use change studies predominated. Although studies on the effects of LSFD on evapotranspiration processes between vegetation, air and soil are fairly well represented, infiltration and recharge processes in karst areas remain poorly understood and knowledge is lacking, particularly on groundwater flow and related hydrological processes. Regional studies and impacts on groundwater resources are also insufficient. The results indicate an urgent need for an integrated holistic interdisciplinary approach and a comprehensive understanding of the individual influencing factors, which would allow more accurate modelling of hydrological processes in forested karst aquifers.
Keywords: natural disasters, climatic changes, evapotranspiration, hydrology, karst aquifers
Published in DiRROS: 19.05.2023; Views: 402; Downloads: 221
.pdf Full text (16,50 MB)
This document has many files! More...

147.
Effect of laser texturing pattern on Ti6Al4Vtribocorrosion in a physiological solution
Marjetka Conradi, Tadeja Kosec, Bojan Podgornik, Aleksandra Kocijan, Janez Kovač, Damjan Klobčar, 2022, original scientific article

Abstract: Laser texturing is a process that alters a material’s surface properties by modifying its morphology, which can improve properties like adherence, wettability, thermal and electrical conductivity and friction. Here, the effect of laser texturing was studied on an alpha-beta titanium alloy (Ti6Al4V) biomedical material. Two types of patterned surfaces, cross-hatch with varying scan-line separations, Dx = 100, 180 and 280 μm and dimples of 200 μm size, were prepared on the surface of alpha-beta titanium alloy by laser technology. Prepared samples were characterised for their surface properties, such as corrosion, wear-induced corrosion, friction and wettability. Electrochemical and tribocorrosion properties in a physiological solution were studied on the samples with different texture densities of cross-hatch pattern and dimples and compared to the as-received alpha-beta titanium alloy surface. Corrosion rate decreased for laser-textured samples, especially for cross-hatch texture (down to 1 μm/year for Dx = 180 μm) when compared to the as-received alpha-beta titanium alloy surface due to the changed laser-induced surface film and wetting properties. Friction coefficient slightly decreased for all laser-textured surfaces, most noticeably for cross-hatch patterns, from 0.38 (as-received) down to 0.34 (Dx = 180 and 280 μm). The main contribution to total wear in physiological solution increased due to the mechanical wear, which is governed by the removal of the surface oxide layer induced by laser texturing.
Keywords: TiAIV, laser texturing, tribocorrosion, open access
Published in DiRROS: 17.05.2023; Views: 298; Downloads: 121
.pdf Full text (2,19 MB)
This document has many files! More...

148.
Synthesis and characterization of plasmonic ▫$Au/TiO_2$▫ nanorod solids for heterogeneous photocatalysis
Špela Slapničar, Gregor Žerjav, Janez Zavašnik, Matjaž Finšgar, Albin Pintar, 2023, original scientific article

Abstract: Plasmonic Au (1 wt%) catalysts deposited on hydrothermally synthesized TiO2 nanorods (TNR) were investigated in this study. Based on the duration of mixing of the Au precursor/TNR suspension during the wet impregnation synthesis and parameters of the end calcination, Au/TiO2 catalysts with different sizes of Au nanoparticles (Au NPs) were obtained. The prepared solids were thoroughly characterized by several instrumental techniques to investigate property-activity relationships. Regardless of the size of Au particles on the catalyst surface, an absorption peak at 550 nm occurred in all UV-Vis diffuse reflectance spectra of the investigated Au/TiO2 catalysts, which is characteristic of the localized surface plasmon resonance effect exerted by metallic Au NPs. By measuring the formation of reactive oxygen species under visible-light illumination using various scavengers, the production of superoxide anion radicals (O2•single bond) and hydroxyl radicals were identified, however, the former were found to represent the main reactive oxygen species that govern the oxidation of aqueous bisphenol A (BPA) employed as a model organic pollutant. The activity of Au/TiO2 catalysts for the generation of O2•single bond radicals (and BPA oxidation) increases by increasing the Schottky barrier height, which is due to the slow reduction of water-dissolved O2 on the catalyst surface.
Keywords: heterogeneous photocatalysis, titanate nanorods, gold nanoparticles, wet impregnation, localized surface plasmon resonance effect
Published in DiRROS: 26.04.2023; Views: 516; Downloads: 231
.pdf Full text (4,16 MB)
This document has many files! More...

149.
New records and noteworthy data of plants, algae and fungi in SE Europe and adjacent regions, 11
Marko S. Sabovljević, Gordana Tomović, Marjan Niketić, Teodor T. Denchev, Cvetomir M. Denchev, Aneta D. Sabovljević, Sorin Stefanut, Gabriela Tamas, Zbigniew Szeląg, Boris Assyov, Lado Kutnar, Janez Kermavnar, 2023, original scientific article

Abstract: This paper presents new records and noteworthy data on the following taxa in SE Europe and adjacent regions: red algae Sheathia confusa, parasitic fungus Anthracoidea caryophylleae, mycorrhizal fugus Hydnellum caeruleum, bryoparasitic fungus Octospora erzbergeri, liverwort Cephaloziella baumgartneri, mosses Hamatocaulis vernicosus, Streblotrichum convolutum var. commutatum and Ulota crispula, monocots Ophrys bertolonii subsp. bertolonii, Ophrys scolopax subsp. cornuta and Spiranthes spiralis and dicots Androsace hedraeantha, Hieracium mrazii, Ramonda nathaliae and Triglochin palustris are given within SE Europe and adjacent regions
Published in DiRROS: 25.04.2023; Views: 505; Downloads: 192
.pdf Full text (223,52 KB)
This document has many files! More...

150.
Search done in 0.42 sec.
Back to top