1. Optimization and mechanical-physical characterization of geopolymers with construction and demolition waste (CDW) aggregates for construction productsMatteo Panizza, Marco Natali, Enrico Garbin, Vilma Ducman, Sergio Tamburini, 2020, original scientific article Abstract: The paper presents the mechanical and physical characterization of a metakaolin-slag-fly ash-potassium silicate geopolymer mortar embedding inorganic recycled aggregates from Construction and Demolition Waste (CDW). The binder was holistically optimized to comply with the pilot plant requirements for producing architectural panels of satisfactory quality, among them: reduced viscosity, minimum open time of 1 h, use of commercial reagents, sufficient strength and limited shrinkage. Size and aspect ratio of small scale cylindrical specimens were investigated in compression, comparing the performance of tested geopolymers to available provisions for natural rocks, cement concrete and mortars. Empirical correlations between compressive and splitting tensile strength were calibrated through the results of about 130 geopolymer mixtures produced in former and current activities. Lastly, the suitability of reusing geopolymers at their end-of-life as recycled aggregates in a new geopolymer production was preliminarily assessed to explore the feasibility of a closed-loop process.
Keywords: construction and demolition waste, alkali activated materials, geopolymers, properties
Published in DiRROS: 17.08.2023; Views: 272; Downloads: 152
 Full text (2,88 MB)
This document has many files! More... |
2. Innovative calcium carbonate-based products to repair cracked cement mortarsMartina Zuena, Andreja Pondelak, Enrico Garbin, Matteo Panizza, Luca Nodari, Andrijana Sever Škapin, Luka Škrlep, Gilberto Artioli, Patrizia Tomasin, 2022, original scientific article Abstract: The durability of Portland cement mortars is often affected by environmental factors, which can cause physicochemical and mechanical degradation processes. In this study, the performance of three products, calcium acetoacetate and calcium tetrahydrofurfuryloxide dissolved in two different solvents developed and tested as stone consolidants, was evaluated in terms of crack filling or sealing and consolidation. Realistic cracks were induced in quasibrittle cement mortar prisms using a custom-designed test rig. The effectiveness and the performance of the considered treatments, investigated on specimens, were evaluated by optical and scanning electron microscopy, colourimetry, water absorption rate, ultrasonic pulse velocity, and surface hardness measurements. Results revealed that, in the examined conditions, the products were more suitable as surface consolidants than as crack fillers.
Keywords: cement mortars, 20th century architecture conservation, calcium acetoacetate, calcium alkoxide, concrete repair, open access
Published in DiRROS: 04.05.2023; Views: 352; Downloads: 203
Full text (2,69 MB)
This document has many files! More... |
