1451. |
1452. |
1453. |
1454. |
1455. |
1456. The effect of heat treatment on the interface of 155 PH martensitic stainless steel and SAF 2507 duplex steel in functionally graded AM componentsMartina Koukolíková, Pavel Podaný, Sylwia Rzepa, Michal Brázda, Aleksandra Kocijan, 2023, original scientific article Abstract: Multi-material components, also known as functionally graded materials (FGMs), are innovative materials that possess unique properties due to their composition and have many potential applications in engineering and science. The effect of the heat treatment (HT) of functionally graded materials 15–5 precipitation-hardened (PH) martensitic steel and SAF 2507 duplex stainless steel (and the opposite order of deposition, i.e. SAF 2507 first followed by 15–5 PH stainless steel) on the interface microstructures was systematically investigated in the presented research. The choice of HT followed the trend of optimum post-processing for the individual alloys. A significant modification in the interface microstructure, characterized in the microstructural transition zone (MTZ) formed above the fusion line. Mechanical properties by miniaturized testing method including hardness measurement characterized both types of interfaces. The sequence of the materials’ application did not have a significant effect on their final mechanical tensile properties in the heat-treated states. Nevertheless, the microstructural change at the MTZ led to drop in the hardness at the interface. The research presents heat-treated FGMs in a horizontal configuration to form a high-quality metallurgical joint between heterogeneous materials manufactured by powder-based directed energy deposition method. Keywords: heat treatment, additive manufacturing, martensitic stainless steel, duplex steel, microstructure, mechanical properties Published in DiRROS: 04.04.2024; Views: 331; Downloads: 98
Link to file |
1457. |
1458. Additive manufacturing multi-material components of SAF 2507 duplex steel and 15-5 PH martensitic stainless steelMartina Koukolíková, Pavel Podaný, Sylwia Rzepa, Michal Brázda, Aleksandra Kocijan, 2023, original scientific article Abstract: The study reports the successful deposition of 15–5 precipitation-hardened (PH) martensitic steel on SAF 2507 duplex stainless steel (and vice versa) to form functionally graded materials (FGMs) using powder-based, directed-energy-deposition (DED) technology. The evolution of the microstructure and the mechanical properties of the 15–5 PH/SAF 2507 functionally graded material in the as-built state were investigated systematically. The results proved that the microstructural transition zone (MTZ) is formed above the fusion line due to the dilution effect of both steels. The phase composition of the MTZ consists of ferrite and, in comparison to the base materials, an increased amount of austenite. The interface has the lowest hardness owing to the formation of a significant proportion of the austenitic phase. However, the tensile mechanical properties were not affected by the interface as failure occurred in both SAF 2507 and at the interface regions. The research presents a promising application of FGMs in a horizontal configuration to form a high - quality, metallurgical joint between heterogeneous materials. This study introduces a novel approach by additive manufacturing (AM) of heterogeneous multi-materials, merging the favorable properties of duplex SAF 2507 and martensitic 15-5 PH stainless steels through superior metallurgical bonding. The combination of SAF 2507 and 15-5 PH in a functionally graded material has not been previously explored, as the existing studies deal with the duplex stainless steels SAF 2507 and either martensitic stainless-steel 15-5 PH deposited separately by laser powder-bed-fusion (L-PBF) or DED methods. This research pioneers the investigation of these materials in tandem, paving the way for the development of novel FGMs with optimized properties for specific applications. The resulting FGM exhibits exceptional corrosion resistance and high strength, making it highly versatile for applications in diverse industries such as offshore oil and gas production, aerospace, aviation, and chemical processing equipment. Keywords: directed energy deposition, functionally graded materials, miniaturized specimen testing methods, SAF 2507, 15-5 PH Published in DiRROS: 04.04.2024; Views: 283; Downloads: 114
Link to file |
1459. Consequence of the introduction of routine FCH PET/CT imaging for patients with prostate cancer : a dual centre surveyMarina Hodolič, Laure Michaud, V. Huchet, S. Balogova, V. Nataf, K. Kerrou, M. Vereb, Jurij Fettich, Jean-Noël Talbot, 2014, original scientific article Abstract: Background. Fluorocholine(18F) (FCH) was introduced at the beginning of April 2010 in France, Slovenia and three other EU member states for the localisation of bone metastases of prostate cancer with PET. The aim of the study was to compare the evolution of diagnostic imaging in patients with prostate cancer using a new radiopharmaceutical FCH, observed in France and in Slovenia, and to quantify the consequence of the results of new imaging modality on the detection rate of abnormal metastases and recurrences of prostate cancer.Patients and methods. In two centres (France/Slovenia), a survey of the number of nuclear medicine examinations in patients with prostate cancer was performed, covering 5 quarters of the year since the introduction of FCH. For each examination, the clinical and biological circumstances were recorded, as well as the detection of bone or soft tissue foci.Results. Six hundred and eighty-eight nuclear medicine examinations were performed impatients with prostate cancer. Nuclear medicine examinations were performed for therapy monitoring and follow-up in 23% of cases. The number of FCH PET/CT grew rapidly between the 1st and 5th period of the observation (+220%), while the number of bone scintigraphies (BS) and fluoride(18F) PET/CTs decreased (-42% and -23% respectively). Fluorodeoxyglucose(18F) (FDG) PET/CT remained limited to few cases of castrate-resistant or metastatic prostate cancer in Paris. The proportion of negative results was significantly lower with FCH PET/CT (14%) than with BS (49%) or fluoride(18F) PET/CT (54%). For bone metastases, the detection rate was similar, but FCH PET/CT was performed on average at lower prostate-specific antigen (PSA) levels and was less frequently doubtful (4% vs. 28% for BS). FCH PET/CT also showed foci in prostatic bed (53% of cases) or in soft tissue (35% of cases).Conclusions. A rapid development of FCH PET/CT was observed in both centres and led to a higher detection rate of prostate cancer lesions. Keywords: prostate cancer, PET/CT, fluorocholine (FCH), fluoride(18F), bone scintigraphy, indication of imaging, prostata, rak (medicina), slikovna diagnostika Published in DiRROS: 04.04.2024; Views: 679; Downloads: 507
Full text (595,04 KB) This document has many files! More... |
1460. |