1. Quantitative aspects of ToF-SIMS analysis of metals and alloys in a UHV, O2 and H2 atmosphereJernej Ekar, Saša Kos, Janez Kovač, 2024, original scientific article Abstract: Although secondary ion mass spectrometry (SIMS) is a versatile method used in the fields of surface analysis, depth profiling and elemental and molecular mapping, it also lacks quantification capabilities. The main reason for this is the matrix effect, which influences the ionization yield of secondary ions with respect to the substrate from which the analyzed compounds originate. There are several approaches to reduce the matrix effect, and gas flooding is one of the easiest methods to apply. In this work, we have investigated the possibilities of the ToF-SIMS method for the quantification of selected metals and alloys containing these metals in different ratios by reducing the matrix effect in the presence of different atmospheres. The measurements were performed in the ultra-high vacuum (UHV) environment, H2 and O2 atmospheres. H2 flooding shows the most significant improvements compared to the UHV analysis, while O2 is also promising but has some limitations. Improvements are most evident for the transition metals Ti, Cr, Fe, Co and Ni employed in our study, while the p-block elements such as Al and Si do not change so extensively. The deviations from the true atomic ratios of selected transition metals in different alloys reach a maximum of only 46 % when analyzed in the H2 atmosphere. In contrast, these values are 66 and 228 % for the O2 atmosphere and UHV environment, respectively. Our results suggest that gas adsorption and consequent formation of a new matrix on the surface, especially in the case of hydrogen, reduces the differences between the different chemical environments and electronic structures of the surface. In this way, the quantitative aspects of the SIMS method can be improved. Keywords: ToF-SIMS quantification, H2 and O2 gas flooding, matrix effect reduction, cluster secondary ions Published in DiRROS: 15.05.2024; Views: 264; Downloads: 203
Full text (1,15 MB) |
2. Quantitative aspects of ToF-SIMS analysis of metals and alloys in a UHV, O2 and H2 atmosphereJernej Ekar, Saša Kos, Janez Kovač, 2024, original scientific article Keywords: ToF-SIMS kvantifikacija, kovine, matrični efekt, preplavljanje, atmosferski plini Published in DiRROS: 09.05.2024; Views: 294; Downloads: 185
Full text (1,15 MB) |
3. |
4. ToF-SIMS depth profiling of metal, metal oxide, and alloy multilayers in atmospheres of ▫$H_2$▫, ▫$C_2H_2$▫, CO, and ▫$O_2$▫Jernej Ekar, Peter Panjan, Sandra Drev, Janez Kovač, 2022, original scientific article Keywords: Ions, Layers, Mass spectrometry, Metals, Oxides, SIMS depth profiling H2 C2H2 CO and O2 atmosphere gas flooding cluster secondary ions matrix effect Published in DiRROS: 18.10.2023; Views: 596; Downloads: 248
Full text (8,02 MB) This document has many files! More... |
5. Recombination of oxygen atoms on the surface of oxidized polycrystalline nickel—temperature and pressure dependencesDomen Paul, Miran Mozetič, Rok Zaplotnik, Jernej Ekar, Alenka Vesel, Gregor Primc, Denis Đonlagić, 2023, original scientific article Abstract: The recombination of neutral oxygen atoms in the ground state on the oxidized nickel samples was studied experimentally in the range of pressures where the maximum density occurs in weakly ionized low-pressure oxygen plasma, i.e. between 40 and 200 Pa. The recombination coefficient was determined in the flowing afterglow. The source of oxygen atoms was plasma sustained in a quartz tube of inner diameter 4.7 mm by a microwave discharge in the surfatron mode. The recombination coefficient was determined in the afterglow chamber, which was a Pyrex tube with an inner diameter of 36 mm. The density of oxygen atoms in the afterglow chamber was varied by adjusting the discharge power, the gas flow, the pressure, and the position of a recombinator. Such flexibility of the experimental system enabled adjustment of the temperature of the oxidized nickel samples independently from the O-atom density in its vicinity or other parameters. The density of oxygen atoms in the afterglow chamber at various system parameters was determined by the Šorli method, which is reliable, and has an accuracy of about 20%. The recombination coefficient was determined by calorimetry. The coefficient was inversely proportional to the square root of the pressure and exponentially to the sample temperature. Systematic measurements performed at various pressures and temperatures enabled empirical formula, which were explained qualitatively by recombination kinetics.
Keywords: heterogenous surface recombination, recombination coefficient, nickel, nickel oxide, temperature Published in DiRROS: 30.08.2023; Views: 516; Downloads: 317
Full text (2,44 MB) This document has many files! More... |
6. Loss of oxygen atoms on well-oxidized cobalt by heterogeneous surface recombinationDomen Paul, Miran Mozetič, Rok Zaplotnik, Jernej Ekar, Alenka Vesel, Gregor Primc, Denis Đonlagić, 2023, original scientific article Abstract: Calorimetry is a commonly used method in plasma characterization, but the accuracy of the method is tied to the accuracy of the recombination coefficient, which in turn depends on a number of surface effects. Surface effects also govern the kinetics in advanced methods such as atomic layer oxidation of inorganic materials and functionalization of organic materials. The flux of the reactive oxygen atoms for the controlled oxidation of such materials depends on the recombination coefficient of materials placed into the reaction chamber, which in turn depends on the surface morphology, temperature, and pressure in the processing chamber. The recombination coefficient of a well-oxidized cobalt surface was studied systematically in a range of temperatures from 300 to 800 K and pressures from 40 to 200 Pa. The coefficient increased monotonously with decreasing pressure and increasing temperature. The lowest value was about 0.05, and the highest was about 0.30. These values were measured for cobalt foils previously oxidized with oxygen plasma at the temperature of 1300 K. The oxidation caused a rich morphology with an average roughness as deduced from atomic force images of 0.9 µm. The results were compared with literature data, and the discrepancy between results reported by different authors was explained by taking into account the peculiarities of their experimental conditions. Published in DiRROS: 25.08.2023; Views: 529; Downloads: 258
Full text (3,59 MB) This document has many files! More... |