| Naslov: | Rapid radiation sintering of additively manufactured large-sized alumina tetrahedrons |
|---|
| Avtorji: | ID Iveković, Aljaž, Institut "Jožef Stefan" (Avtor)
ID Križaj, Miha, Mednarodna podiplomska šola Jožefa Stefana (Avtor)
ID Kocjan, Andraž, Institut "Jožef Stefan" (Avtor) |
|---|
| Datoteke: |  URL - Izvorni URL, za dostop obiščite https://www.sciencedirect.com/science/article/pii/S2666539526000775
 PDF - Predstavitvena datoteka, prenos (7,97 MB)
MD5: 213B73AD1FDFE25136D13084676E6C7F
|
|---|
| Jezik: | Angleški jezik |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: |  IJS - Institut Jožef Stefan
|
|---|
| Povzetek: | Rapid radiation techniques, such as pressureless spark plasma sintering (pSPS) and ultra-fast high-temperature sintering (UHS), have proven effective in achieving rapid densification of ceramics, including additively manufactured components. However, sintered component sizes tend to be small, disk-shaped or having thin-strutted geometries. Here, fused filament fabrication (FFF) of a commercial filament was used for manufacturing complex-shaped and large-sized alumina tetrahedra with edge thickness of 5 mm, varying the edge size (15‒40 mm). The aim was to investigate the effect of heating rate (33‒300°C/min) and tetrahedron size on the pSPS outcome. The pSPS reductive environment discoloured the tetrahedra, but were all successfully rapidly sintered to full density irrespective of their size and heating rate employed. The evolved thermal gradient contributed to differential, anisotropic densification related shrinkage, microstructure and mechanical properties specific to tetrahedra` edge position, i.e., core versus shell and base versus lateral, also triggering cracking of the largest tetrahedra. |
|---|
| Ključne besede: | additive manufacturing, fused filament fabrication, pressureless spark plasma sintering |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 15.01.2026 |
|---|
| Datum sprejetja članka: | 13.05.2026 |
|---|
| Datum objave: | 14.05.2026 |
|---|
| Založnik: | Elsevier |
|---|
| Leto izida: | 2026 |
|---|
| Št. strani: | str. 1-26 |
|---|
| Številčenje: | Vol. , article no. 100981 |
|---|
| Izvor: | Nizozemska |
|---|
| PID: | 20.500.12556/DiRROS-30090  |
|---|
| UDK: | 621.7+621.9 |
|---|
| ISSN pri članku: | 2666-5395 |
|---|
| DOI: | 10.1016/j.oceram.2026.100981 |
|---|
| COBISS.SI-ID: | 278483971 |
|---|
| Avtorske pravice: | © 2026 The Authors. |
|---|
| Opomba: | Nasl. z nasl. zaslona;
Opis vira z dne 18. 5. 2026;
|
|---|
| Datum objave v DiRROS: | 15.06.2026 |
|---|
| Število ogledov: | 59 |
|---|
| Število prenosov: | 47 |
|---|
| Metapodatki: |    |
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
