| Naslov: | Influence of test methodology on the characterization of the parallel-to-grain timber embedment strength and foundation modulus of dowels |
|---|
| Avtorji: | ID D. Aquino, Caroline (Avtor)
ID Leonardo G., Rodrigues (Avtor)
ID Schweigler, Michael (Avtor)
ID Kržan, Meta (Avtor)
ID Li, Zheng (Avtor)
ID Branco, Jorge M. (Avtor) |
|---|
| Datoteke: |  URL - Izvorni URL, za dostop obiščite https://www.tandfonline.com/doi/full/10.1080/17480272.2024.2328088
 PDF - Predstavitvena datoteka, prenos (3,96 MB)
MD5: 6FE8B1E360B92142ACCD92F05044900F
|
|---|
| Jezik: | Angleški jezik |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: |  ZAG - Zavod za gradbeništvo Slovenije
|
|---|
| Povzetek: | A reliable determination of the embedment strength and foundation modulus of timber elements is critical for the design and safety assessment of joints in timber structures. However, the existence of various test configurations for characterising the embedding properties of large diameter steel fasteners in timber elements poses challenges in directly comparing and utilising available test data. This paper aims to provide an insight into the influence of embedment property test methods, comparing experimental results from different test setups within the guidelines of the EN 383 and ASTM D 5764-97a standards for European softwood species, Scots pine wood (Pinus sylvestris) and Norway spruce (Picea abies). In addition to the test guidelines, the thickness of the specimen and the application of the load was evaluated within the protocols. A comprehensive statistical analysis was performed to identify statistically significant differences between the groups evaluated. The results of the analysis revealed disagreement between the standards in the evaluation of the strength of the embedding, highlighting the potential bias inserted by the experimental setup and protocol. Furthermore, it was proven that the thickness of the specimens influences both the embedding strength and the foundation modulus of the wood species tested. Finally, no distinctions were observed between tensile and compressive loading within the guidelines of the EN 383 standard. |
|---|
| Ključne besede: | embedment strength, foundation modulus, dowel-type connections, test methods |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Datum objave: | 08.04.2024 |
|---|
| Založnik: | Taylor & Francis |
|---|
| Leto izida: | 2024 |
|---|
| Št. strani: | str. 1-13 |
|---|
| PID: | 20.500.12556/DiRROS-18675  |
|---|
| UDK: | 620.1/.2 |
|---|
| ISSN pri članku: | 1748-0280 |
|---|
| DOI: | 10.1080/17480272.2024.2328088 |
|---|
| COBISS.SI-ID: | 191924739 |
|---|
| Avtorske pravice: | © 2024 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group |
|---|
| Opomba: | Nasl. z nasl. zaslona;
Opis vira z dne 9. 4. 2024;
|
|---|
| Datum objave v DiRROS: | 15.04.2024 |
|---|
| Število ogledov: | 465 |
|---|
| Število prenosov: | 246 |
|---|
| Metapodatki: |    |
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
