| Naslov: | Alternative alkali activators based on waste bottle glass and waste cathode-ray tube glass |
|---|
| Avtorji: | ID Koenig, Katja (Avtor)
ID Traven, Katja (Avtor)
ID Ducman, Vilma (Avtor) |
|---|
| Datoteke: |  PDF - Predstavitvena datoteka, prenos (14,96 MB)
MD5: 784B54F3B28983B358E004308C521C77
Opis: Odprti dostop
PDF - Predstavitvena datoteka, prenos (1,72 MB)
MD5: 9C43B4CE7C61DEF8FEF6FB1CF80E21C6
 URL - Izvorni URL, za dostop obiščite https://www.zag.si/dl/coms2020-21-proceedings-2-rev.pdf
|
|---|
| Jezik: | Angleški jezik |
|---|
| Tipologija: | 1.08 - Objavljeni znanstveni prispevek na konferenci |
|---|
| Organizacija: |  ZAG - Zavod za gradbeništvo Slovenije
|
|---|
| Povzetek: | Alkali-activated binders are an environmentally friendly alternative to Portland cement, particularly when locally-available raw materials are used. It is well known that alkali activation with a sodium silicate activator generates a hardened binder with higher compressive strength than a binder hardened with sodium hydroxide. As the alkali-silicate activators are produced through energy extensive processes, and their use can significantly increase the carbon footprint of the final products, it is of great significance to develop alternative alkaline activators based on locally-available waste materials. This article assesses the potential to apply waste bottle glass and waste cathode-ray tube (CRT) glass to synthesise alternative alkali activators by the hydrothermal method. Inductively coupled plasma-optical emission spectrometry (ICP-OES) was used to determine silicon and aluminium content in the alternative activators. The influence of dissolution process parameters (time, temperature, particle size) on the concentrations of silicon and aluminium in the alternative activators was investigated. The alternative activators with silicon concentration up to 19 g/L and aluminium concentration up to 0.9 g/L were prepared at T = 120 °C and boiling time 24 h. The alternative alkali activators and, for comparison, also commercial sodium silicate were used in the alkali activation of fly ash powder. The formed pastes were cured at 70 °C for 72 h. Mechanical strength measurements indicated that alkali activation of fly ash with the optimal alternative activator yielded hardened paste with compressive strength of 33 MPa. However, the compressive strength of hardened paste prepared from fly ash and commercial sodium silicate reached 70 MPa. Part of this difference can be ascribed to the lower density of hardened pastes prepared with alternative activators. |
|---|
| Ključne besede: | alkali -activated materials, alternative alkali activators, waste bottle glass, waste cathode -ray tube glass, fly ash, hydrothermal method |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Datum objave: | 01.01.2021 |
|---|
| Založnik: | Slovenian National Building and Civil Engineering Institute |
|---|
| Leto izida: | 2021 |
|---|
| Št. strani: | Str. 93-100 |
|---|
| PID: | 20.500.12556/DiRROS-17974  |
|---|
| UDK: | 624 |
|---|
| COBISS.SI-ID: | 69350659 |
|---|
| Avtorske pravice: | © 2021 Slovenian National Building and Civil Engineering Institute, Ljubljana 2021 |
|---|
| Opomba: | Nasl. z nasl. zaslona;
Opis vira z dne 6. 7. 2021;
|
|---|
| Datum objave v DiRROS: | 25.01.2024 |
|---|
| Število ogledov: | 171 |
|---|
| Število prenosov: | 113 |
|---|
| Metapodatki: |     |
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
