Digitalni repozitorij raziskovalnih organizacij Slovenije

Izpis gradiva
A+ | A- | Pomoč | SLO | ENG

Naslov:Production of lightweight alkali activated mortars using mineral wools
Avtorji:ID Alzaza, Ahmad (Avtor)
ID Mastali, Mohammad (Avtor)
ID Kinnunen, Paivo (Avtor)
ID Korat, Lidija (Avtor)
ID Abdollahnejad, Zahra (Avtor)
ID Ducman, Vilma (Avtor)
ID Illikainen, Mirja (Avtor)
Datoteke:URL URL - Izvorni URL, za dostop obiščite https://www.mdpi.com/1996-1944/12/10/1695
 
.pdf PDF - Predstavitvena datoteka, prenos (10,47 MB)
MD5: C315266A293594E6594E4BA80093F18F
 
Jezik:Angleški jezik
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:Logo ZAG - Zavod za gradbeništvo Slovenije
Povzetek:This experimental study aimed to develop a fiber-reinforced lightweight mineral wool-based alkali activated mortar. The lightweight mineral wool-based alkali activated mortars were produced using premade foam and reinforced by polypropylene (PP) fibers. They were assessed in terms of fresh and hardened-state properties. Fresh-state properties were investigated by mini-slump tests. Hardened-state characteristics were assessed by ultrasonic pulse velocity, dry density, compressive and flexural strengths, drying shrinkage, efflorescence, water absorption, and permeable porosity. For the first time, the resistance of the synthesized lightweight mineral wool-based alkali activated mortars against harsh conditions (carbonation, freeze and thaw, and high temperature) were evaluated. The porous structures of the developed lightweight alkali activated mortars were also analyzed using an X-ray micro-computed tomography (CT) technique. Lightweight mix compositions with densities in a range of 770%1510 kg/m3, compressive strengths of 1%9 MPa, and flexural strengths of 2.6%8 MPa were developed. Increases in both density and strength after carbonation were also recorded, while a decrease of strength was noticed after exposure to freeze/thaw and high temperatures of up to 500 %C.
Ključne besede:alkali activation, mineral wool, mortars
Status publikacije:Objavljeno
Verzija publikacije:Objavljena publikacija
Datum objave:24.05.2019
Založnik:Molecular Diversity Preservation International
Leto izida:2019
Št. strani:str. 1-34
Številčenje:Vol. 12, no. 10
PID:20.500.12556/DiRROS-17183 Novo okno
UDK:620.1/.2
ISSN pri članku:1996-1944
DOI:10.3390/ma12101695 Novo okno
COBISS.SI-ID:2461799 Novo okno
Avtorske pravice:© 2019 by the authors. Licensee MDPI, Basel, Switzerland.
Opomba:Nasl. z nasl. zaslona; Opis vira z dne 29. 5. 2019; Št. članka : 1965;
Datum objave v DiRROS:24.10.2023
Število ogledov:661
Število prenosov:304
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
  
Objavi na:Bookmark and Share


Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše podrobnosti ali sproži prenos.

Gradivo je del revije

Naslov:Materials
Skrajšan naslov:Materials
Založnik:Molecular Diversity Preservation International
ISSN:1996-1944
COBISS.SI-ID:33588485 Novo okno

Gradivo je financirano iz projekta

Financer:EC - European Commission
Program financ.:ERA-MIN2/Business
Številka projekta:24302797
Naslov:Lightweight alkali activated composite foams based on secondary raw materials
Akronim:FLOW

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:alkalna aktivacija, mineralna volna, malte


Nazaj