1. A numerical study of gas focused non-Newtonian micro-jetsRizwan Zahoor, Saša Bajt, Božidar Šarler, 2024, izvirni znanstveni članek Ključne besede: serial crystallography, micro jets, multiphase flow, fluid rheology, non-Newtonian fluid, flow focusing
Objavljeno v DiRROS: 28.02.2024; Ogledov: 137; Prenosov: 69
 Celotno besedilo (11,78 MB)
Gradivo ima več datotek! Več... |
2. Formulation of the method of fundamental solutions for two-phase Stokes flowZlatko Rek, Božidar Šarler, 2024, izvirni znanstveni članek Povzetek: The method of fundamental solutions with a subdomain technique is used for the solution of the free boundary problem associated with a two-phase Stokes flow in a 2D geometry. The solution procedure is based on the collocation of the boundary conditions with the Stokeslets. It is formulated for the flow of unmixing fluids in contact, where the velocity, pressure field, and position of the free boundary between the fluids must be determined. The standard formulation of the method of fundamental solutions is, for the first time, upgraded for the case with mixed velocity and pressure boundary conditions and verified on a T-splitter single-phase flow with unsymmetric pressure boundary conditions. The standard control volume method is used for the reference solution. The accurate evaluation of the velocity derivatives, which are required to calculate the balance of forces at the free boundary between the fluids, is achieved in a closed form in contrast to previous numerical attempts. An algorithm for iteratively calculating the position of the free boundary that involves displacement, smoothing and repositioning of the nodes is elaborated. The procedure is verified for a concurrent flow of two fluids in a channel. The velocity and velocity derivatives show fast convergence to the analytical solution. The developed boundary meshless method is easy to code, accurate and computationally efficient since only collocation at the fixed and free boundaries is needed.
Ključne besede: Stokes equations, two-phase flow, free boundary problems, method of fundamental solutions, subdomain technique
Objavljeno v DiRROS: 28.02.2024; Ogledov: 133; Prenosov: 88
Celotno besedilo (3,40 MB)
Gradivo ima več datotek! Več... |
3. An experimental study of liquid micro-jets produced with a gas dynamic virtual nozzle under the influence of an electric fieldBor Zupan, Gisel Esperanza Peña-Murillo, Rizwan Zahoor, Jurij Gregorc, Božidar Šarler, Juraj Knoška, Alfonso M. Gañán-Calvo, Henry N. Chapman, Saša Bajt, 2023, izvirni znanstveni članek Povzetek: The results of an experimental study of micro-jets produced with a gas dynamic virtual nozzle (GDVN) under the influence of an electric field are provided and discussed for the first time. The experimental study is performed with a 50% volume mixture of water and ethanol, and nitrogen focusing gas. The liquid sample and gas Reynolds numbers range from 0.09–5.4 and 0–190, respectively. The external electrode was positioned 400–500 μm downstream of the nozzle tip and an effect of electric potential between the electrode and the sample liquid from 0–7 kV was investigated. The jetting parametric space is examined as a function of operating gas and liquid flow rates, outlet chamber pressure, and an external electric field. The experimentally observed jet diameter, length and velocity ranged from 1–25 μm, 50–500 μm and 0.5–10 m/s, respectively. The jetting shape snapshots were processed automatically using purposely developed computer vision software. The velocity of the jet was calculated from the measured jet diameter and the sample flow rate. It is found that micro-jets accelerate in the direction of the applied electric field in the downstream direction at a constant acceleration as opposed to the standard GDVNs. New jetting modes were observed, where either the focusing gas or the electric forces dominate, encouraging further theoretical and numerical studies towards optimized system design. The study shows the potential to unlock a new generation of low background sample delivery for serial diffraction measurements of weakly scattering objects.
Ključne besede: micro jet, electric field, experimental study, flow focusing, Taylor cone, gas dynamic virtual nozzles
Objavljeno v DiRROS: 07.02.2024; Ogledov: 218; Prenosov: 96
Celotno besedilo (1,94 MB)
Gradivo ima več datotek! Več... |
4. A coupled domain–boundary type meshless method for phase-field modelling of dendritic solidification with the fluid flowTadej Dobravec, Boštjan Mavrič, Rizwan Zahoor, Božidar Šarler, 2023, izvirni znanstveni članek Povzetek: Purpose - This study aims to simulate the dendritic growth in Stokes flow by iteratively coupling a domain and boundary type meshless method. Design/methodology/approach - A preconditioned phase-field model for dendritic solidification of a pure supercooled melt is solved by the strong-form space-time adaptive approach based on dynamic quadtree domain decomposition. The domain-type space discretisation relies on monomial augmented polyharmonic splines interpolation. The forward Euler scheme is used for time evolution. The boundary-type meshless method solves the Stokes flow around the dendrite based on the collocation of the moving and fixed flow boundaries with the regularised Stokes flow fundamental solution. Both approaches are iteratively coupled at the moving solid–liquid interface. The solution procedure ensures computationally efficient and accurate calculations. The novel approach is numerically implemented for a 2D case. Findings - The solution procedure reflects the advantages of both meshless methods. Domain one is not sensitive to the dendrite orientation and boundary one reduces the dimensionality of the flow field solution. The procedure results agree well with the reference results obtained by the classical numerical methods. Directions for selecting the appropriate free parameters which yield the highest accuracy and computational efficiency are presented. Originality/value - A combination of boundary- and domain-type meshless methods is used to simulate dendritic solidification with the influence of fluid flow efficiently.
Ključne besede: dendritic solidification, Stokes flow, phase-field method, space-time adaptivity, meshless methods, RBF-FD, modified method of regularised sources
Objavljeno v DiRROS: 07.02.2024; Ogledov: 151; Prenosov: 66
Celotno besedilo (1,07 MB)
Gradivo ima več datotek! Več... |
5. Quality-assurance of heat-flow data: the new structure and evaluation scheme of the IHFC Global Heat Flow DatabaseSven Fuchs, Ben Norden, Florian Neumann, Norbert Kaul, Akiko Tanaka, Ilmo T. Kukkonen, Christophe Pascal, Rodolfo Christiansen, Gianluca Gola, Dušan Rajver, 2023, izvirni znanstveni članek Povzetek: Since 1963, the International Heat Flow Commission has been fostering the compilation of the Global Heat Flow Database to provide reliable heat-flow data. Over time, techniques and methodologies evolved, calling for a reorganization of the database structure and for a reassessment of stored heat-flow data. Here, we provide the results of a collaborative, community-driven approach to set-up a new, quality-approved global heat-flow database. We present background information on how heat-flow is determined and how this important thermal parameter could be systematically evaluated. The latter requires appropriate documentation of metadata to allow the application of a consistent evaluation scheme. The knowledge of basic data (name and coordinates of the site, depth range of temperature measurements, etc.), details on temperature and thermal-conductivity data and possible perturbing effects need to be given. The proposed heat-flow quality evaluation scheme can discriminate between different quality aspects affecting heat flow: numerical uncertainties, methodological uncertainties, and environmental effects. The resulting quality codes allow the evaluation of every stored heat-flow data entry. If mandatory basic data are missing, the entry is marked accordingly. In cases where more than one heat-flow determination is presented for one specific site, and all of them are considered for the site, the poorest evaluation score is inherited to the site level. The required data and the proposed scheme are presented in this paper. Due to the requirements of the newly developed evaluation scheme, the database structure as presented in 2021 has been updated and is available in the appendix of this paper. The new quality scheme will allow a comprehensible evaluation of the stored heat-flow data for the first time.
Ključne besede: heat-flow density, quality scheme, thermal geophysics, global heat flow database (GHFD), thermal parameter, data information system, International Heat Flow Commission (IHFC)
Objavljeno v DiRROS: 09.08.2023; Ogledov: 337; Prenosov: 129
Celotno besedilo (4,78 MB) |
6. A glimpse of the lost Upper Triassic to Middle Jurassic architecture of the Dinaric Carbonate Platform margin and slopeBoštjan Rožič, Luka Gale, Primož Oprčkal, Astrid Švara, Tomislav Popit, Lara Kunst, Dragica Turnšek, Tea Kolar-Jurkovšek, Andrej Šmuc, Aljaž Iveković, Jan Udovč, David Gerčar, 2022, izvirni znanstveni članek Povzetek: In the southernmost outcrops of the Slovenian Basin the Middle Jurassic coarse-grained limestone breccia (mega)beds are interstratified within a succession that is otherwise dominated by hemipelagites and distal turbidites. In this paper, these beds are described as the Ponikve Breccia Member of the Tolmin Formation. We provide descriptions of the studied sections with detailed geological maps and analysis of the breccia lithoclasts. From the latter, a non-outcropping margin of the Dinaric Carbonate Platform is reconstructed. In the Late Triassic the platform margin was characterized by a Dachstein-type marginal reef. After the end-Triassic extinction event, the platform architecture remained, but the reefs were replaced by sand shoals characterized by ooids. In the late Early Jurassic and/or early Middle Jurassic a slope area might have been dissected by normal faults and a step-like paleotopography was formed. In the Bajocian, during a period of major regional geodynamic perturbations, extensional or transtensional tectonic activity intensified and triggered the large-scale collapses of the Dinaric Carbonate Platform margin producing the limestone breccias described herein. This may in turn have caused a backstepping of the platform margin, as is evident from the occurrence of Late Jurassic marginal reefs that are installed directly above the Upper Triassic and Lower Jurassic inner platform successions.
Ključne besede: Slovenian Basin, Dinaric Carbonate Platform, Middle Jurassic, limestone breccia, debris-flow, stratigraphy, Ponikve breccia
Objavljeno v DiRROS: 18.01.2023; Ogledov: 518; Prenosov: 411
Celotno besedilo (24,45 MB)
Gradivo ima več datotek! Več... |
7. Review of the research and evolution of landslides in the hinterland of Koroška Bela settlement (NW Slovenia)Tina Peternel, Ela Šegina, Jernej Jež, Mateja Jemec Auflič, Mitja Janža, Janko Logar, Matjaž Mikoš, Miloš Bavec, 2022, izvirni znanstveni članek Povzetek: This paper gives an overview of landslide research and the activity of landslides located above the Koroška Bela settlement in Northwest Slovenia. There are several landslides in this area and they pose a direct threat to the settlement below. The settlement is very densely populated (about 2,100 inhabitants) and has well-developed industry and infrastructure. It is built on deposits from past debris flows, indicating that large slope mass movements have occurred in the past. In this regard, the hinterland of Koroška Bela has been investigated since 2006, within the framework of various research, technical and European projects. The most extensive geological and geotechnical investigations were carried out after April 2017, when part of the Čikla landslide collapsed and mobilised into a debris flow. All of the investigations which have been carried out over the years revealed that the hinterland of Koroška Bela is characterised by high landslide activity due to geological, hydrogeological and tectonic conditions. In order to protect people and their property, it is essential to implement a holistic mitigation measure which includes remediation works (drainage works, debris flow breaker, etc.) and non-structural measures (monitoring system, early warning system, risk management, etc.). Regular and continuous monitoring of all landslides is also crucial to observe the landslide dynamics and evaluate the effectiveness of structural mitigation measures.
Ključne besede: landslide, debris flow, research, monitoring, landslide evolution, Koroška Bela
Objavljeno v DiRROS: 03.10.2022; Ogledov: 666; Prenosov: 186
Celotno besedilo (11,09 MB) |
8. |
9. Effect of the N[sub]2/Ar flow ratio on the microstructure and mechanical properties of TiSiCN coatingsJin Wang, Mengting Wang, Yongqiang Wang, Dayan Ma, Hao Li, 2021, izvirni znanstveni članek Ključne besede: TiSiCN, multi-arc ion plating, magnetron sputtering, N[sub]2/Ar flow ratio, mechanical properties, tribological properties
Objavljeno v DiRROS: 06.05.2022; Ogledov: 442; Prenosov: 111
 Povezava na datoteko |
10. |
