Iskanje po repozitoriju

A+ | A- | | SLO | ENG

Povzetek: Reinforced concrete structures require continuous monitoring and maintenance to prevent corrosion of the carbon steel reinforcement. In this work, concrete columns with carbon and stainless steel reinforcements were exposed to a real marine environment. In order to monitor the corrosion processes, two types of corrosion probes were embedded in these columns at different height levels. The results from the monitoring of the probes were compared to the actual corrosion damage in the different exposure zones. Electrical resistance (ER) probes and coupled multi-electrodes (CMEs) were shown to be promising methods for long-term corrosion monitoring in concrete. Correlations between the different exposure zones and the corrosion processes of the steel in the concrete were found. Macrocell corrosion properties and the distribution of the separated anodic/cathodic places on the steel in chloride-contaminated concrete were addressed as two of the key issues for understanding the corrosion mechanisms in such environments. The specific advantages and limitations of the tested measuring techniques for long-term corrosion monitoring were also indicated. The results of the measurements and the corrosion damage evaluation clearly confirmed that the tested stainless steels (AISI 304 and AISI 304L) in a chloride-contaminated environment behave significantly better than ordinary carbon steel, with corrosion rates from 110% to 9500% lower in the most severe (tidal) exposure conditions.
Ključne besede: corrosion in concrete, steel reinforcement, long-term exposure, field exposure, electrical resistance (ER) probes, coupled multi-electrodes
Objavljeno v DiRROS: 21.08.2023; Ogledov: 249; Prenosov: 156
Celotno besedilo (4,42 MB)
Gradivo ima več datotek! Več...

Povzetek: The RILEM technical committee TC 247-DTA ‘Durability Testing of Alkali-Activated Materials’ conducted a round robin testing programme to determine the validity of various durability testing methods, originally developed for Portland cement based-concretes, for the assessment of the durability of alkali-activated concretes. The outcomes of the round robin tests evaluating sulfate resistance, alkali-silica reaction (ASR) and freeze–thaw resistance are presented in this contribution. Five different alkali-activated concretes, based on ground granulated blast furnace slag, fly ash, or metakaolin were investigated. The extent of sulfate damage to concretes based on slag or fly ash seems to be limited when exposed to an Na2SO4 solution. The mixture based on metakaolin showed an excessive, very early expansion, followed by a dimensionally stable period, which cannot be explained at present. In the slag-based concretes, MgSO4 caused more expansion and visual damage than Na2SO4; however, the expansion limits defined in the respective standards were not exceeded. Both the ASTM C1293 and RILEM AAR-3.1 test methods for the determination of ASR expansion appear to give essentially reliable identification of expansion caused by highly reactive aggregates. Alkali-activated materials in combination with an unreactive or potentially expansive aggregate were in no case seen to cause larger expansions; only the aggregates of known very high reactivity were seen to be problematic. The results of freeze–thaw testing (with/without deicing salts) of alkali-activated concretes suggest an important influence of the curing conditions and experimental conditions on the test outcomes, which need to be understood before the tests can be reliably applied and interpreted.
Ključne besede: alkali-activated materials/geopolymers, sulphate resistance, alkali silica reactivity, freeze-thaw resistance, Rilem TC
Objavljeno v DiRROS: 17.08.2023; Ogledov: 226; Prenosov: 163
Celotno besedilo (560,56 KB)
Gradivo ima več datotek! Več...

Povzetek: Equipment made of different stainless steels is often used in the hydrometallurgical processing industry. In this study, an electrical resistance sensor was developed for monitoring corrosion in acidic solutions at high temperature. Two types of stainless steel were used as the electrode materials, namely grade 316L stainless steel (EN 1.4404) and grade 2507 duplex stainless steel (EN 1.4410). The materials and sensors were exposed to a 10% H2SO4 solution containing 5000 mg/L of NaCl at various temperatures. Results from the sensors were verified using electrochemical techniques and postexposure examination. Results showed that the microstructure played an important role in the interpretation of corrosion rates, highlighting the importance of using an appropriate stainless steel for the production of sensors. Electrochemical tests and postexposure examination both showed that the grade 2507 had a significantly lower corrosion rate compared to the grade 316L. Under industrial‑process conditions, the results for the grade 2507 sensor were promising with respect to sensor durability and performance, despite the extremely harsh operating environment.
Ključne besede: stainless steel, hydrometallurgical industry, sulphuric acid, electrical resistance sensor, corrosion
Objavljeno v DiRROS: 05.07.2023; Ogledov: 325; Prenosov: 183
Celotno besedilo (5,12 MB)
Gradivo ima več datotek! Več...

Povzetek: Bisphenol A (BPA) is one of the most commonly used substances in the manufacture ofvarious everyday products. Growing concerns about its hazardous properties, including endocrinedisruption and genotoxicity, have led to its gradual replacement by presumably safer analogues inmanufacturing plastics. The widespread use of BPA and, more recently, its analogues has increasedtheir residues in the environment. However, our knowledge of their toxicological profiles is limitedand their combined effects are unknown. In the present study, we investigated the toxic effectscaused by single bisphenols and by the combined exposure of BPA and its two analogues, BPAP andBPC, after short (24-h) and prolonged (96-h) exposure in HepG2 spheroids. The results showed thatBPA did not reduce cell viability in HepG2 spheroids after 24-h exposure. In contrast, BPAP andBPC affected cell viability in HepG2 spheroids. Both binary mixtures (BPA/BPAP and BPA/BPC)decreased cell viability in a dose-dependent manner, but the significant difference was only observedfor the combination of BPA/BPC (both at 40μM). After 96-h exposure, none of the BPs studiedaffected cell viability in HepG2 spheroids. Only the combination of BPA/BPAP decreased cellviability in a dose-dependent manner that was significant for the combination of 4μM BPA and 4μMBPAP. None of the BPs and their binary mixtures studied affected the surface area and growth ofspheroids as measured by planimetry. In addition, all BPs and their binary mixtures studied triggeredoxidative stress, as measured by the production of reactive oxygen species and malondialdehyde,at both exposure times. Overall, the results suggest that it is important to study the effects of BPsas single compounds. It is even more important to study the effects of combined exposures, as thecombined effects may differ from those induced by single compounds.
Ključne besede: chloroplast redox state, hypersensitive response (HR)-conferred resistance, immune signaling, live cell imaging, Solanum tuberosum (potato), spatiotemporal analysis, stromules, virus resistance
Objavljeno v DiRROS: 13.04.2023; Ogledov: 393; Prenosov: 126
Povezava na datoteko

Povzetek: Interleukin 12 (IL-12) is a key cytokine that mediates antitumor activity of immune cells. To fulfill its clinical potential, the development is focused on localized delivery systems, such as gene electrotransfer, which can provide localized delivery of IL-12 to the tumor microenvironment. Gene electrotransfer of the plasmid encoding human IL-12 is already in clinical trials in USA, demonstrating positive results in the treatment of melanoma patients. To comply with EU regulatory requirements for clinical application, which recommend the use of antibiotic resistance gene-free plasmids, we constructed and developed the production process for the clinical grade quality antibiotic resistance gene-free plasmid encoding human IL-12 (p21-hIL-12-ORT) and its ortholog encoding murine IL-12 (p21-mIL-12-ORT). To demonstrate the suitability of the p21-hIL-12-ORT or p21-mIL-12-ORT plasmid for the first-in-human clinical trial, the biological activity of the expressed transgene, its level of expression and plasmid copy number were determined in vitro in the human squamous cell carcinoma cell line FaDu and the murine colon carcinoma cell line CT26. The results of the non-clinical evaluation in vitro set the basis for further in vivo testing and evaluation of antitumor activity of therapeutic molecules in murine models as well as provide crucial data for further clinical trials of the constructed antibiotic resistance gene-free plasmid in humans.
Ključne besede: interleukin 12, gene electrotransfer, antibiotic resistance, plasmids
Objavljeno v DiRROS: 07.09.2022; Ogledov: 503; Prenosov: 296
Celotno besedilo (4,73 MB)
Gradivo ima več datotek! Več...