| Naslov: | Characterization of steel corrosion in alkali-activated mortars using advanced techniques |
|---|
| Avtorji: | ID Gartner, Nina (Avtor)
ID Hren, Miha (Avtor)
ID Kosec, Tadeja (Avtor)
ID Legat, Andraž (Avtor) |
|---|
| Datoteke: |  URL - Izvorni URL, za dostop obiščite https://www.sciencedirect.com/science/article/pii/S2214509525009635
 PDF - Predstavitvena datoteka, prenos (12,04 MB)
MD5: 5A1D38E65F5AEB95AF1E72D83A9A8FAD
PDF - Priloga, prenos (668,68 KB)
MD5: 2CC50935D89163A538525E7C944C6618
To gradivo ima še več datotek. Celoten seznam je na voljo
spodaj. |
|---|
| Jezik: | Angleški jezik |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: |  ZAG - Zavod za gradbeništvo Slovenije
|
|---|
| Povzetek: | Alkali-activated materials have emerged as a promising substitute for ordinary Portland cement (OPC) in various applications. This study explores the use of different monitoring techniques for assessing the long-term corrosion behavior of steel in alkali-activated mortars, which remains relatively understudied. Three types of alkali-activated mortars (AAMs) were prepared, based on fly ash, slag, or metakaolin as the precursor material. The corrosion of embedded steel was investigated under wetting and drying cycles with chloride-containing solution for up to one year. Two unconventional techniques were used to monitor corrosion: coupled multi-electrode array sensors (CMEA) to measure partial currents, and electrical resistance (ER) sensors to track thickness reduction. The ER sensors enabled evaluation of general corrosion rates over time, while CMEA provided insight into corrosion initiation and its spatiotemporal distribution. In addition, the corrosion damage on the embedded steel and sensors was evaluated using X-ray computed microtomography (microCT). Distinct corrosion patterns were observed depending on the precursor material: severe corrosion in metakaolin-based AAMs, localized pitting in slag-based AAMs, and moderate damage in fly ash-based AAMs. The study demonstrates the complementary value of CMEA and ER sensors and highlights the challenges of characterizing the long-term corrosion processes in these alternative binder systems. |
|---|
| Ključne besede: | corrosion, alkali‐activated materials, coupled multi-electrode array (CMEA), electrical resistance (ER) sensor, X-ray computed microtomography (microCT), visual analysis |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Datum objave: | 11.08.2025 |
|---|
| Založnik: | Elsevier |
|---|
| Leto izida: | 2025 |
|---|
| Št. strani: | str. 1-17 |
|---|
| Številčenje: | Vol. 23, [article no.] e05165 |
|---|
| PID: | 20.500.12556/DiRROS-23422  |
|---|
| UDK: | 620.1/.2 |
|---|
| ISSN pri članku: | 2214-5095 |
|---|
| DOI: | 10.1016/j.cscm.2025.e05165 |
|---|
| COBISS.SI-ID: | 246113283 |
|---|
| Avtorske pravice: | © 2025 The Author(s). |
|---|
| Opomba: | Nasl. z nasl. zaslona;
Opis vira z dne 20. 8. 2025;
|
|---|
| Datum objave v DiRROS: | 27.08.2025 |
|---|
| Število ogledov: | 393 |
|---|
| Število prenosov: | 275 |
|---|
| Metapodatki: |    |
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
