| Naslov: | Is alloying a promising path to substitute critical raw materials? |
|---|
| Avtorji: | ID Rousseau, François (Avtor)
ID Nominé, Alexandre, Institut "Jožef Stefan" (Avtor)
ID Zavašnik, Janez, Institut "Jožef Stefan" (Avtor)
ID Cvelbar, Uroš, Institut "Jožef Stefan" (Avtor) |
|---|
| Datoteke: |  URL - Izvorni URL, za dostop obiščite https://www.sciencedirect.com/science/article/pii/S1369702125000288
 PDF - Predstavitvena datoteka, prenos (2,14 MB)
MD5: BBF8B99C8849C0D9E28FC7E7B1D3D678
|
|---|
| Jezik: | Angleški jezik |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: |  IJS - Institut Jožef Stefan
|
|---|
| Povzetek: | A long-standing problem in metallurgy has been the alloying of metals and the search for new alloys that can improve performance and replace expensive metals. This decades-long quest for high-performance alloys has led to increasingly complex compositions. The number of possible alloy compositions to explore is literally astronomical. While this enormous range gives hope for the discovery of alternative materials, it also makes trial-and-error research highly speculative. This article will show that while alloying can offer alternatives, the supply risks increases with the number of elements involved and quickly outweigh the supply risks of the element being replaced. Therefore, the possibilities of alloying are not unlimited and a balance must be found between the overall supply risk and the number of elements used. In substitution scenarios, the supply risk increases almost linearly with the number of elements in the alloy. As a rule, effective combinations comprise no more than five elements, all of which are selected from the elements with the lowest supply risk. This significantly limits the range of possible candidates and makes the task of synthesis and characterization more manageable for materials scientists. By considering the multiple dimensions stepping in the supply risk, the list of suitable elements can be further refined and prioritized. |
|---|
| Ključne besede: | critical raw materials, risk assessment, supply chain sustainability, material dependency reduction |
|---|
| Datum objave: | 31.01.2025 |
|---|
| Založnik: | Elsevier |
|---|
| Leto izida: | 2025 |
|---|
| Št. strani: | str. 1-8 |
|---|
| Številčenje: | Vol. |
|---|
| Izvor: | Nizozemska |
|---|
| PID: | 20.500.12556/DiRROS-21447  |
|---|
| UDK: | 620.1/.2 |
|---|
| ISSN pri članku: | 1873-4103 |
|---|
| DOI: | 10.1016/j.mattod.2025.01.015 |
|---|
| COBISS.SI-ID: | 224837891 |
|---|
| Avtorske pravice: | © 2025 The Author(s). |
|---|
| Opomba: | Nasl. z nasl. zaslona;
Soavtorja iz Slovenije: Janez Zavašnik, Uroš Cvelbar;
Opis vira z dne 3. 2. 2025;
|
|---|
| Datum objave v DiRROS: | 05.02.2025 |
|---|
| Število ogledov: | 1315 |
|---|
| Število prenosov: | 346 |
|---|
| Metapodatki: |    |
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
