| Naslov: | Exploratory study on the bending performance of thermo-hydro-mechanically densified Scots pine (Pinus sylvestris L.) at elevated temperatures |
|---|
| Avtorji: | ID Han, Lei (Avtor)
ID Schwarzkopf, Matthew (Avtor)
ID Pečnik, Jaka Gašper (Avtor)
ID Rojas Alva, Wilson Ulises (Avtor)
ID Lucherini, Andrea (Avtor)
ID Kutnar, Andreja (Avtor)
ID Sandberg, Dick (Avtor) |
|---|
| Datoteke: |  URL - Izvorni URL, za dostop obiščite https://doi.org/10.1080/17480272.2024.2350685
URL - Izvorni URL, za dostop obiščite https://www.tandfonline.com/doi/full/10.1080/17480272.2024.2350685
 PDF - Predstavitvena datoteka. (618,48 KB, Vsebina dokumenta nedostopna do 21.05.2025)
MD5: 4DF25175752267D47F0315EC21BF8AE8
|
|---|
| Jezik: | Angleški jezik |
|---|
| Tipologija: | 1.03 - Drugi znanstveni članki |
|---|
| Organizacija: |  ZAG - Zavod za gradbeništvo Slovenije
|
|---|
| Povzetek: | Thermo-hydro-mechanical (THM) densification is a well-known wood modification procedure for improving the mechanical properties of low-density wood species, but its performance at elevated temperatures is not well understood. The objective of this study was to determine the bending behaviour of densified Scots pine at elevated temperatures. A total of 48 specimens (200 mm (longitudinonal) × 20 mm (radial) × 20 mm (tangential)) were tested to investigate the bending performance under constant temperatures at 25, 50, 125 and 175°C, respectively. It was found that the modulus of rupture (MOR) and modulus of elasticity (MOE) of both un-densified and densified pine decreased with increasing temperature. However, the densified wood exhibited more brittle shear failure but retained higher MOR and MOE than the untreated specimens treated at the same temperature level. In general, the results demonstrate that densification can be a potentially effective method to retain the mechanical properties of wood at elevated temperatures, thereby having a potential maintain the load-bearing capacity during and after fire. |
|---|
| Ključne besede: | densification, wood, fire safety |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Recenzirani rokopis |
|---|
| Datum objave: | 20.05.2024 |
|---|
| Založnik: | Taylor & Francis |
|---|
| Leto izida: | 2024 |
|---|
| Št. strani: | str. 829-832 |
|---|
| Številčenje: | Vol. 19, iss. 3 |
|---|
| PID: | 20.500.12556/DiRROS-20894  |
|---|
| UDK: | 630*2 |
|---|
| ISSN pri članku: | 1748-0272 |
|---|
| DOI: | 10.1080/17480272.2024.2350685 |
|---|
| COBISS.SI-ID: | 196872963 |
|---|
| Avtorske pravice: | © 2024 Informa UK Limited, trading as Taylor & Francis Group |
|---|
| Opomba: | Soavtorji: Matthew Schwarzkopf, Jaka Gašper Pečnik, Ulises Rojas-Alvac, Andrea Lucherini, Andreja Kutnar, & Dick Sandberg;
|
|---|
| Datum objave v DiRROS: | 28.11.2024 |
|---|
| Število ogledov: | 59 |
|---|
| Število prenosov: | 43 |
|---|
| Metapodatki: |    |
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
