| Naslov: | Laser powder bed fusion parameters optimization for enhanced mechanical properties of EOS Co-Cr dental alloy |
|---|
| Avtorji: | ID Viderščak, Dalibor (Avtor)
ID Schauperl, Zdravko (Avtor)
ID Runje, Biserka (Avtor)
ID Šolić, Sanja (Avtor)
ID Ćatić, Amir (Avtor)
ID Godec, Matjaž (Avtor)
ID Paulin, Irena (Avtor)
ID Donik, Črtomir (Avtor) |
|---|
| Datoteke: |  PDF - Predstavitvena datoteka, prenos (8,69 MB)
MD5: 919D63A8145948EA5C213AAC5BBAD1E4
 URL - Izvorni URL, za dostop obiščite https://www.mdpi.com/1996-1944/17/20/4993
|
|---|
| Jezik: | Angleški jezik |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: |  IMT - Inštitut za kovinske materiale in tehnologije
|
|---|
| Povzetek: | This research explores how variations in laser powder bed fusion (LPBF) parameters—laser power (P), scanning speed (v), and base plate preheating temperature (ϑp)—affect the mechanical properties of the EOS Co-Cr SP2 dental alloy. A central composite design (CCD) was used to optimize the process parameters. Mechanical testing focused on crucial properties for dental applications, including yield strength (Rp0.2), elongation (ε), toughness (KVa), and flexural strength (Rms). Microstructural analysis was conducted using light and electron microscopy, while XRD identified microstructural phases. Statistical analysis (ANOVA, Scheffé post hoc test, α = 0.05) revealed significant effects of P, v, and ϑp on the mechanical properties. Response surface models (RSMs) were developed, and optimal parameters were determined to achieve maximum toughness and flexural strength. Maximum values were obtained with laser power above 205Wand base plate preheating at 310 ◦C. The mathematical model predicted toughness values with less than 5% deviation from experimental results, indicating high accuracy. |
|---|
| Ključne besede: | LPBF, production parameters, Co-Cr dental alloy, CCD, mechanical properties, ANOVA |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Datum objave: | 12.10.2024 |
|---|
| Založnik: | MDPI |
|---|
| Leto izida: | 2024 |
|---|
| Št. strani: | str. 1-15 |
|---|
| Številčenje: | Vol. 17, iss. 20, [article no.] 4993 |
|---|
| Izvor: | Švica |
|---|
| PID: | 20.500.12556/DiRROS-20543  |
|---|
| UDK: | 621.7 :620.1:669.2/.8 |
|---|
| ISSN pri članku: | 1996-1944 |
|---|
| DOI: | 10.3390/ma17204993 |
|---|
| COBISS.SI-ID: | 211864579 |
|---|
| Avtorske pravice: | © 2024 by the authors |
|---|
| Opomba: | Nasl. z nasl. zaslona;
Opis vira z dne 17. 10. 2024;
|
|---|
| Datum objave v DiRROS: | 18.10.2024 |
|---|
| Število ogledov: | 165 |
|---|
| Število prenosov: | 8151 |
|---|
| Metapodatki: |    |
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
