| Naslov: | A hybrid radial basis function-finite difference method for modelling two-dimensional thermo-elasto-plasticity : Application to cooling of hot-rolled steel bars on a cooling bed |
|---|
| Avtorji: | ID Vuga, Gašper (Avtor)
ID Mavrič, Boštjan (Avtor)
ID Hanoglu, Umut (Avtor)
ID Šarler, Božidar (Avtor) |
|---|
| Datoteke: |  URL - Izvorni URL, za dostop obiščite https://www.sciencedirect.com/science/article/pii/S0955799723005714
 PDF - Predstavitvena datoteka, prenos (8,55 MB)
MD5: 7CA6A07908512F88AC7885CD75824C63
|
|---|
| Jezik: | Angleški jezik |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: |  IMT - Inštitut za kovinske materiale in tehnologije
|
|---|
| Povzetek: | This paper represents Part 2 of the parallel paper Part 1, where the strong form hybrid RBF-FD method was developed for solving thermo-elasto-plastic problems. It addresses the industrial application of this novel meshless method to steel bars cooling on a cooling bed (CB) where the formation of residual stress is of primary interest. The study investigates the impact of the distance between the bars and the distance to the heat shield above the CB on radiative heat fluxes and, consequently, on thermo-mechanical response. The thermal model is solved on bars cross-section with a RBF-FD method where augmented polyharmonic splines are used for the local approximation. View factors, computed with a Monte-Carlo method, are included in radiative heat fluxes. The thermal solution is incrementally applied on a mechanical model that assumes a generalised plane strain state and captures bars bending. The study employs a hybrid RBF-FD method to resolve a nonlinear discontinuous mechanical problem successfully. The simulation of the process shows how different process parameters influence the thermo-mechanical response of the bars. |
|---|
| Ključne besede: | steel bars, cooling bed, thermo-mechanical modelling, hybrid radial basis function, generated finite differences, residual stresses |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Datum objave: | 01.02.2024 |
|---|
| Založnik: | Elsevier |
|---|
| Leto izida: | 2024 |
|---|
| Št. strani: | str. 331-341 |
|---|
| Številčenje: | Vol. 159 |
|---|
| Izvor: | Nizozemska |
|---|
| PID: | 20.500.12556/DiRROS-18278  |
|---|
| UDK: | 539.4 |
|---|
| ISSN pri članku: | 0955-7997 |
|---|
| DOI: | 10.1016/j.enganabound.2023.12.001 |
|---|
| COBISS.SI-ID: | 179241219 |
|---|
| Avtorske pravice: | © 2023 The Author(s). Published by Elsevier Ltd. |
|---|
| Datum objave v DiRROS: | 28.02.2024 |
|---|
| Število ogledov: | 456 |
|---|
| Število prenosov: | 273 |
|---|
| Metapodatki: |    |
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
