Digitalni repozitorij raziskovalnih organizacij Slovenije

Izpis gradiva
A+ | A- | Pomoč | SLO | ENG

Naslov:Influence of curing / drying methods including microwave heating on alkali activation of waste casting cores
Avtorji:ID Horvat, Barbara (Avtor)
ID Ducman, Vilma (Avtor)
Datoteke:.pdf PDF - Predstavitvena datoteka, prenos (9,29 MB)
MD5: 9894BB38311A12D91AA0F5BC762F8F04
Opis: Odprti dostop
 
.pdf PDF - Predstavitvena datoteka, prenos (3,06 MB)
MD5: 4CAD53A9FB8BC4BA79390E267E4A1120
 
URL URL - Izvorni URL, za dostop obiščite https://www.zag.si/dl/coms2020-21-proceedings-2.pdf
 
Jezik:Angleški jezik
Tipologija:1.08 - Objavljeni znanstveni prispevek na konferenci
Organizacija:Logo ZAG - Zavod za gradbeništvo Slovenije
Povzetek:Within previous investigation alkali activation of waste casting cores at room temperature did not give promising results, i.e. when the precursor was gently ground and sieved below 600 %m the alkali activated material fell apart at demolding, and when the precursor was ground below 90 %m, the alkali activated material did not solidify in more than 2 years. , Therefore different drying/curing methods were applied to enhance the reaction. Waste casting cores were prepared in two granulations (sieved below 600 %m and below 90 %m), activated with Na -water glass and 10 M NaOH, cured at different temperatures (70 °C and room temperature), and subsequently cured/dried at three different conditions: room temperature, 110 °C, and irradiated with microwaves. The highest compressive strength, 25 MPa, was gained with subsequent curing/drying at 110 °C. The lowest density, 0.5 kg/l, with compressive strength above 3 MPa, was achieved with subsequent curing/drying with microwaves .
Ključne besede:waste casting cores, alkali activation, curing, drying, microwaves, mechanical strength
Status publikacije:Objavljeno
Verzija publikacije:Objavljena publikacija
Datum objave:01.01.2021
Založnik:Slovenian National Building and Civil Engineering Institute (ZAG)
Leto izida:2021
Št. strani:Str. 48-57
PID:20.500.12556/DiRROS-17933 Novo okno
UDK:621.742.4
COBISS.SI-ID:64285187 Novo okno
Avtorske pravice:© 2021 Slovenian National Building and Civil Engineering Institute
Opomba:Nasl. z nasl. zaslona; Opis vira z dne 24. 5. 2021;
Datum objave v DiRROS:22.01.2024
Število ogledov:567
Število prenosov:367
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
  
Objavi na:Bookmark and Share


Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše podrobnosti ali sproži prenos.

Gradivo je del monografije

Naslov:Construction materials for a sustainable future : proceedings of the 2nd International Conference CoMS 2020/21
Uredniki:Aljoša Šajna, Andraž Legat, Sabina Jordan, Petra Horvat, Ema Kemperle, Sabina Dolenec, Metka Ljubešek, Matej Michelizza
Kraj izida:Ljubljana
Založnik:Slovenian National Building and Civil Engineering Institute
Leto izida:2021
ISBN:978-961-7125-01-6
COBISS.SI-ID:60496131 Novo okno

Gradivo je financirano iz projekta

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:P2-0273
Naslov:Gradbeni objekti in materiali

Licence

Licenca:CC BY-NC-ND 4.0, Creative Commons Priznanje avtorstva-Nekomercialno-Brez predelav 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by-nc-nd/4.0/deed.sl
Opis:Najbolj omejujoča licenca Creative Commons. Uporabniki lahko prenesejo in delijo delo v nekomercialne namene in ga ne smejo uporabiti za nobene druge namene.

Nazaj