Digital repository of Slovenian research organisations

Show document
A+ | A- | Help | SLO | ENG

Title:The corrosion properties of steel in pore solutions obtained from alkali‐activated mortars
Authors:ID Gartner, Nina (Author)
ID Kosec, Tadeja (Author)
ID Poyet, Stéphane (Author)
ID Legat, Andraž (Author)
Files:.pdf PDF - Presentation file, download (2,73 MB)
MD5: 772C88CAFACD58CB8A6743920ADAB420
 
URL URL - Source URL, visit https://doi.org/10.1002/maco.202313729
 
Language:English
Typology:1.01 - Original Scientific Article
Organization:Logo ZAG - Slovenian National Building and Civil Engineering Institute
Abstract:Alkali‐activated materials (AAMs) are considered a promising alternative to materials made from ordinary Portland cement (OPC). Other than considering the durability of the material itself, the use of AAMs for reinforced concrete elements also raises the question of steel corrosion processes in these materials, which are still relatively unknown. Three different alkali‐activated mortars were prepared for this study, based on either fly ash, slag, or metakaolin. Pore solutions were then extracted from each mortar and chemically analyzed. Electrochemical techniques were used to study the corrosion of steel in synthetic pore solutions containing varying concentrations of chlorides. In parallel, the same corrosion tests were performed in a generic pore solution representing OPC mortar. It was shown that the chemical composition differed in each pore solution tested, thus affecting the corrosion properties of the steel. The addition of chloride also had a varying effect on the corrosion properties of the steel in each type of pore solution tested. This study provided a basic overview of the corrosion behavior and mechanisms of the various AAM environments in comparison to that of OPC.
Keywords:alkali-aktivated materials, corrosion, electrochemical corrosion techniques, extracted pore solution
Publication status:Published
Publication version:Author Accepted Manuscript
Publication date:28.03.2023
Publisher:Wiley VCH
Year of publishing:2023
Number of pages:str. 1009-1021
Numbering:Vol. 74, iss. 7
PID:20.500.12556/DiRROS-17292 New window
UDC:544.5/.6
ISSN on article:1521-4176
DOI:10.1002/maco.202313729 New window
COBISS.SI-ID:151389443 New window
Copyright:© 2023 Wiley‐VCH GmbH.
Note:Nasl. z nasl. zaslona; Opis vira z dne 9. 5. 2023;
Publication date in DiRROS:20.11.2023
Views:589
Downloads:237
Metadata:XML DC-XML DC-RDF
:
Copy citation
  
Share:Bookmark and Share


Hover the mouse pointer over a document title to show the abstract or click on the title to get all document metadata.

Record is a part of a journal

Title:Materials and corrosion
Shortened title:Mater. corros.
Publisher:Wiley VCH
ISSN:1521-4176
COBISS.SI-ID:21828101 New window

Document is financed by a project

Funder:Other - Other funder or multiple funders
Name:Phenomenological modelling of steel corrosion in concretes for service life prediction

Funder:ARRS - Slovenian Research Agency
Project number:P2-0273
Name:Gradbeni objekti in materiali

Licences

License:Other
Description:This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions. This article may not be enhanced, enriched or otherwise transformed into a derivative work, without express permission from Wiley or by statutory rights under applicable legislation. Copyright notices must not be removed, obscured or modified. The article must be linked to Wiley’s version of record on Wiley Online Library and any embedding, framing or otherwise making available the article or pages thereof by third parties from platforms, services and websites other than Wiley Online Library must be prohibited.

Secondary language

Language:Slovenian
Keywords:alkalijsko aktivirani materiali, korozija, elektrokemijske korozijske tehnike, iztisnjena porna voda


Back