41. Napotki za premagovanje neželenih učinkov sistemskega zdravljenja raka : kaj morate vedeti?Simona Borštnar, Boštjan Šeruga, Marjana Bernot, Marika Horvat, Barbara Jezeršek Novaković, Denis Mlakar-Mastnak, Janja Ocvirk, Samo Rožman, Monika Sonc, Snežana Umičević, Metka Zajc, Branko Zakotnik, 2023, slovar, enciklopedija, leksikon, priročnik, atlas, zemljevid Ključne besede: onkologija, bolniki, nasveti
Objavljeno v DiRROS: 22.11.2023; Ogledov: 359; Prenosov: 138
 Celotno besedilo (798,13 KB) |
42. |
43. Influence of laser colour marking on the corrosion properties of low alloyed TiTadeja Kosec, Andraž Legat, Janez Kovač, Damjan Klobčar, 2019, izvirni znanstveni članek Povzetek: In the field of surface treatment, laser colour marking can be used to produce coloured marks on the surfaces of metals. Laser colour markings can be applied to various materials, but on titanium alloys a wide spectra of vivid colours can be achieved. This study presents an analysis of the corrosion properties of laser treated surfaces that were exposed to aggressive environments. Different samples were prepared with laser light of various power intensities and processing speeds. The samples were prepared on low alloyed Ti. Electrochemical, spectroscopic and microstructural analyses were conducted in order to study the properties of the laser treated surfaces. Corrosion testing showed different effects of laser power and production speed on the properties of the laser treated surfaces. It was shown that a high intensity and slow processing rate affect the surfaces by forming oxides that are relatively stable in a corrosive environment of 0.1 M NaCl. Spectroscopic investigations including scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) analyses showed the differences in chemical structure of the surface layer formed after laser treatment. Similarly, microstructural investigations showed different effects on the surface and sub-surface layer of the laser treated samples.
Ključne besede: Ti alloy, laser treatment, XPS, corrosion
Objavljeno v DiRROS: 25.10.2023; Ogledov: 398; Prenosov: 162
Celotno besedilo (3,16 MB)
Gradivo ima več datotek! Več... |
44. |
45. A red Roman column from Emona (Ljubljana, Slovenia)Andreja Maver, Bernarda Županek, Maja Gutman, Dragomir Skaberne, Sabina Dolenec, 2020, izvirni znanstveni članek Povzetek: The excavation conducted in 1999 in Ljubljana (Slovenia), in Insula XXVII of the Roman colonia Iulia Emona, un-earthed the remains of a column shaft with an organic core set onto a stone block. The contribution presents this find, its context and likely parallels, the mineralogical-petrographic composition of the stucco, type of the pigments used, as well as the rock of the plinth and its provenance. Of the shaft, only the stucco survives, applied in four mortar layers and painted in red ochre, while its interior surface shows the impressions of reeds. The plinth is a rectangular block made of locally available Lower Jurassic oolitic limestone, presumably from Podpeč. The column may have formed part of a porticus or peristyle, possibly associated with a pool or a bath complex in this part of Late Roman Emona.
Ključne besede: NUK II Site (Ljubljana, Slovenia), columns, Roman architecture, reed impressions, stucco, limestone, Late Roman period
Objavljeno v DiRROS: 04.08.2023; Ogledov: 315; Prenosov: 229
Celotno besedilo (12,00 MB)
Gradivo ima več datotek! Več... |
46. Effect of laser texturing pattern on Ti6Al4Vtribocorrosion in a physiological solutionMarjetka Conradi, Tadeja Kosec, Bojan Podgornik, Aleksandra Kocijan, Janez Kovač, Damjan Klobčar, 2022, izvirni znanstveni članek Povzetek: Laser texturing is a process that alters a material’s surface properties by modifying its morphology, which can improve properties like adherence, wettability, thermal and electrical conductivity and friction. Here, the effect of laser texturing was studied on an alpha-beta titanium alloy (Ti6Al4V) biomedical material. Two types of patterned surfaces, cross-hatch with varying scan-line separations, Dx = 100, 180 and 280 μm and dimples of 200 μm size, were prepared on the surface of alpha-beta titanium alloy by laser technology. Prepared samples were characterised for their surface properties, such as corrosion, wear-induced corrosion, friction and wettability. Electrochemical and tribocorrosion properties in a physiological solution were studied on the samples with different texture densities of cross-hatch pattern and dimples and compared to the as-received alpha-beta titanium alloy surface. Corrosion rate decreased for laser-textured samples, especially for cross-hatch texture (down to 1 μm/year for Dx = 180 μm) when compared to the as-received alpha-beta titanium alloy surface due to the changed laser-induced surface film and wetting properties. Friction coefficient slightly decreased for all laser-textured surfaces, most noticeably for cross-hatch patterns, from 0.38 (as-received) down to 0.34 (Dx = 180 and 280 μm). The main contribution to total wear in physiological solution increased due to the mechanical wear, which is governed by the removal of the surface oxide layer induced by laser texturing.
Ključne besede: TiAIV, laser texturing, tribocorrosion, open access
Objavljeno v DiRROS: 17.05.2023; Ogledov: 304; Prenosov: 123
Celotno besedilo (2,19 MB)
Gradivo ima več datotek! Več... |
47. Vpliv opustitve dopolnilne kemoterapije na preživetje bolnic z zgodnjim ER+/HER2+ rakom dojkValentina Jerič Horvat, Damjan Manevski, Barbara Gazić, Primož Drev, Domen Ribnikar, Erika Matos, Boštjan Šeruga, 2022, objavljeni povzetek strokovnega prispevka na konferenci Ključne besede: onkologija, rak dojke, kemoterapija
Objavljeno v DiRROS: 27.01.2023; Ogledov: 414; Prenosov: 113
Celotno besedilo (47,33 KB) |
48. |
49. |
50. |
