11. Effects of specific parameters on simulations of energy use and air temperatures in offices equipped with radiant heating/cooling panelsSabina Jordan, Jože Hafner, Martina Zbašnik-Senegačnik, Andraž Legat, 2019, izvirni znanstveni članek Povzetek: When creating a simulation model to assess the performance of buildings, there is usually a lack of feedback information. Only in the case of measurements of a real building is a direct comparison of the measured values and simulated results possible. Parameter data related to users’ behavior or other events can also be obtained. Their evaluated frequency, magnitude and duration, along with boundary conditions, are crucial for the results. It is clear that none of them can be predicted very accurately. Most of them, however, are needed for computer modeling. In this paper we analyzed the well-defined TRNSYS simulation model of offices equipped with radiant ceiling panels for heating and cooling. The model was based on real case offices and was validated based on measurements for 1 year. The analysis included simulations in order to define what effect the parameters related mainly to users have on the energy use and the indoor air temperatures. The study confirmed that specific human activities influence the annual energy use to a relatively small degree and that their effects often counteract. It also confirmed the even more important fact that although small, these activities can influence the thermal comfort of users. It is believed that despite the fact that this research was based on an analysis of offices equipped with radiant ceiling panels, most of the results could be applied generally.
Ključne besede: measurements, modeling, simulation, validation, analysis, energy use, temperature
Objavljeno v DiRROS: 15.09.2023; Ogledov: 322; Prenosov: 152
 Celotno besedilo (1,83 MB)
Gradivo ima več datotek! Več... |
12. The role of electricity mix and production efficiency improvements on greenhouse gas (GHG) emissions of building components and future refurbishment measuresTajda Potrč Obrecht, Sabina Jordan, Andraž Legat, Alexander Passer, 2021, izvirni znanstveni članek Povzetek: Purpose: An estimation of the environmental impact of buildings by means of a life cycle assessment (LCA) raises uncertainty related to the parameters that are subject to major changes over longer time spans. The main aim of the present study is to evaluate the influence of modifications in the electricity mix and the production efficiency in the chosen reference year on the embodied impacts (i.e., greenhouse gas (GHG) emissions) of building materials and components and the possible impact of this on future refurbishment measures.
Methods: A new LCA methodological approach was developed and implemented that can have a significant impact on the way in which existing buildings are assessed at the end of their service lives. The electricity mixes of different reference years were collected and assessed, and the main datasets and sub-datasets were modified according to the predefined substitution criteria. The influence of the electricity-mix modification and production efficiency were illustrated on a selected existing reference building, built in 1970. The relative contribution of the electricity mix to the embodied impact of the production phase was calculated for four different electricity mixes, with this comprising the electricity mix from 1970, the current electricity mix and two possible future electricity-mix scenarios for 2050. The residual value of the building was also estimated.
Results and discussion: In the case presented, the relative share of the electricity mix GHG emission towards the total value was as high as 20% for separate building components. If this electricity mix is replaced with an electricity mix having greater environmental emissions, the relative contribution of the electricity mix to the total emissions can be even higher. When, by contrast, the modified electricity mix is almost decarbonized, the relative contribution to the total emissions may well be reduced to a point where it becomes negligible. The modification of the electricity mix can also influence the residual value of a building. In the observed case, the differences due to different electricity mixes were in the range of 10%.
Conclusions: It was found that those parameters that are subject to a major change during the reference service period of the building should be treated dynamically in order to obtain reliable results. Future research is foreseen to provide additional knowledge concerning the influence of dynamic parameters on both the use phase and the end-of-life phase of buildings, and these findings will also be important when planning future refurbishment measures.
Ključne besede: global warming potential (GWP), production phase, electricity mix, production efciency, residual value, refurbishment, building components, life cycle assessment (LCA)
Objavljeno v DiRROS: 31.07.2023; Ogledov: 395; Prenosov: 201
Celotno besedilo (1,44 MB)
Gradivo ima več datotek! Več... |
13. An LCA methodolody for assessing the environmental impacts of building components before and after refurbishmentTajda Potrč Obrecht, Sabina Jordan, Andraž Legat, Marcella Ruschi Mendes Saade, Alexander Passer, 2021, izvirni znanstveni članek Povzetek: Refurbishment is one of the most important measures for reducing the environmental impacts of the construction sector in the near future. According to the life cycle assessment (LCA) methodology for buildings, the environmental impacts of refurbishment measures should be assessed within the whole life cycle of the building and reflected in separate modules. However, in practice, refurbishment is often treated as the beginning of a new building life cycle. This leads to difficulties in correctly assessing the environmental impacts for the components that are reused or recycled after the refurbishment. The division of a building’s life cycle into two separate life cycles indicates that the environmental impacts must be divided between the life cycle before and the life cycle after the refurbishment for a correct assessment of the environmental impacts and a calculation of the residual value. We propose a newly developed methodology for calculating the environmental impacts and the residual value of refurbishment measures that also involves a division between life cycles. The new methodology is a combi-nation of already exiting methodologies that are innovatively combined and consists of four sequential steps. In the first step, the input, output and reuse flows between the life cycles before and after the refurbishment are defined. In the second step, the environmental impacts are assessed using the chosen allocation approach (i.e., the cut-off, cut-off with module D, avoided-burden, 50:50 and the product environmental footprint (PEF)). In the third step, a maintenance scenario is implemented according to the selected reference-service-life (RSL) database. In the fourth step, the residual value is estimated. The methodology was tested on selected building components. A sensitivity analysis for different allocation approaches and RSL databases was performed to show how the choice of these parameters can influence the results. The differences between the selected allocation approaches emerge if materials with recycled content are used or if the materials are being recycled or reused at the end of their life cycle. The developed methodology reliably estimates the environmental impacts as well as the residual value of the life cycle before and after the refurbishment. We expect that this research will stimulate practitioners to avoid the negligence of previous environmental flows, bringing scientific consistency to future assessments of refurbishment measures.
Ključne besede: Life cycle assessment (LCA), refurbishment, allocation approaches, residual value, reference service life (RSL)
Objavljeno v DiRROS: 28.07.2023; Ogledov: 354; Prenosov: 227
Celotno besedilo (8,59 MB)
Gradivo ima več datotek! Več... |
