1. Green transition in slovenian building and civil engineering industry : 10 years of research on alkali-activated materials and alkali-activated foamsBarbara Horvat, Branka Mušič, 2024, published scientific conference contribution (invited lecture) Abstract: The building and civil engineering industry yearly causes more than 40% of man-made CO2 and consumes raw materials for two-thirds of Mont Everest. To decrease the carbon footprint and consumption of raw materials, alkali-activated materials (AAMs) are researched as an alternative to conventional building and civil engineering products like cements, mortar, and ceramics. Ideally, locally available waste materials are used as ingredients: (i) as precursors that react with alkali and form an aluminosilicate network, and (ii) as fillers that get permanently encapsulated and safely stored in AAMs. The addition of gas bubbles and lightweight fillers transforms AAMs into alkali-activated foams and alkali-activated lightweight materials that have the potential to be used as thermal and acoustic insulation materials. Although AAMs are researched worldwide, this review focuses on the state-of-the-art localised solely to Slovenia, particularly on the materials and curing procedures used, as well as on the scientific contribution of the basic research. Besides, the year 2024 marks 10 years of research on alkali activation of raw and waste inorganic materials in Slovenia.
Keywords: secondary raw material, alkali-activated material, alkali-activated foams, alkali, circular economy, microwave irradiation, mechanical strength
Published in DiRROS: 12.03.2024; Views: 108; Downloads: 104
 Full text (84,58 MB)
This document has many files! More... |
2. Waste rubber incorporated in the alkali-activated metakaolin’s aluminosilicate network enhanced by microwave irradiationBarbara Horvat, Branka Mušič, 2024, published scientific conference contribution Abstract: Building materials represent the possibility of prolonging the life of waste materials. The key is to ensure that the products are suitable for their function. So we activated metakaolin with the alkaline Na-silicate solution in the ratio that ensures the prevention of efflorescence and high mechanical strength (Horvat and Ducman, 2019). As the waste material (to be incorporated in the aluminosilicate network (ASN) of the alkali-activated metakaolin) ground waste rubber from electric cables was used in the preselected mass ratios. Its inclusion in products, like paving stones, can reduce stiffness, improve durability, dampen vibrations, and reduce road noise. The mechanical strengths of test samples with rubber present on the active surface or slightly below were higher compared to samples where rubber was encapsulated throughout the volume. Compressive strength was higher when samples were irradiated with low powers of microwaves while irradiation with higher powers led to the foaming of alkali-activated slurry. The encapsulation quality of the ground rubber was evaluated by SEM while the chemical influence on ASN was determined by EDS, FTIR, and XRD. Slipperiness change on the active surface of pavement stones proved that the addition of the ground rubber enhanced the walking safety of the product.
Keywords: secondary raw material, alkali activated material, waste rubber, metakaolin, encapsulation of organic in inorganic material, microwave irradiation, mechanical strength
Published in DiRROS: 12.03.2024; Views: 100; Downloads: 47
Full text (13,99 MB)
This document has many files! More... |
3. Fibre reinforced alkali-activated rock woolMajda Pavlin, Barbara Horvat, Vilma Ducman, 2022, published scientific conference contribution Abstract: Mineral wool, i.e. rock and glass wool, represents considerable challenge after its functional-time runs out due to its small density leading to large volume consumption during transport and in landfills where it usually ends. Because rock wool is mineralogically and chemically a promising precursor material for alkali-activation, it was milled from few centimetres-decimeters long fibres to micron-sized fibres. Since fibres in alkali-activated materials generally show an increase in mechanical strength, especially the bending strength, 1 m% of additional fibres (basalt, cellulose (2 types), glass, polypropylene, polyvinyl alcohol and steel fibres) was used in the alkali mixture, that was curred at 40 °C for 3 days. Time dependence of the mechanical strengths of alkali- activated materials with and without additional fibres was followed. Maximal increase of compressive and bending strength after 28 days was reached with polypropylene fibres, i.e. it was 20% and 30% higher than compressive and bending strength of alkali- activated material without additional fibres respectively.
Keywords: secondary raw material, alkali activated material, foaming, homogenization, mechanical strength
Published in DiRROS: 21.12.2023; Views: 233; Downloads: 79
Full text (8,39 MB)
This document has many files! More... |
4. Influence of homogenization of alkali-activated slurry on mechanical strengthBarbara Horvat, Mark Češnovar, Katja Traven, Majda Pavlin, Katja Koenig, Vilma Ducman, 2022, published scientific conference contribution Abstract: Alkali-activated materials are promising materials for the construction industry due to the accessibility of the precursors, which are mainly secondary industrial by-products, and their cost- effective and energy-efficient production. Although these materials are not new, some of the parameters in the technological process are not yet fully understood and tested. Therefore, in this paper in the means of mechanical strength, the preparation of alkali-activated pastes by using a three-roll mill homogenization method is discussed. The influence of homogenization of alkali- activated slurry has been evaluated on different waste materials (fly ash, fly ash with metakaolin, slag mixture (electric arc furnace slag and ladle slag), glass wool, waste green ceramics), which are treated with different alkali activators (NaOH, commercial sodium silicate solution, laboratory-produced alkali activators based on waste cathode- ray tube glass) with different curing regimes (60 °C and 70 °C) and different drying methods (drying at room temperature, drying at 105 °C). The viscosity of the slurry before homogenization was higher than after homogenization, the distribution of elements was more uniform and the compressive strength higher in all homogenized alkali activated materials, regardless of other parameters.
Keywords: secondary raw material, alkali activated material, foaming, homogenization, mechanical strength
Published in DiRROS: 21.12.2023; Views: 248; Downloads: 84
Full text (15,82 MB)
This document has many files! More... |
