31. |
32. |
33. |
34. Influence of homogenization of alkali-activated slurry on mechanical strengthBarbara Horvat, Mark Češnovar, Katja Traven, Majda Pavlin, Katja Koenig, Vilma Ducman, 2022, published scientific conference contribution Abstract: Alkali-activated materials are promising materials for the construction industry due to the accessibility of the precursors, which are mainly secondary industrial by-products, and their cost- effective and energy-efficient production. Although these materials are not new, some of the parameters in the technological process are not yet fully understood and tested. Therefore, in this paper in the means of mechanical strength, the preparation of alkali-activated pastes by using a three-roll mill homogenization method is discussed. The influence of homogenization of alkali- activated slurry has been evaluated on different waste materials (fly ash, fly ash with metakaolin, slag mixture (electric arc furnace slag and ladle slag), glass wool, waste green ceramics), which are treated with different alkali activators (NaOH, commercial sodium silicate solution, laboratory-produced alkali activators based on waste cathode- ray tube glass) with different curing regimes (60 °C and 70 °C) and different drying methods (drying at room temperature, drying at 105 °C). The viscosity of the slurry before homogenization was higher than after homogenization, the distribution of elements was more uniform and the compressive strength higher in all homogenized alkali activated materials, regardless of other parameters.
Keywords: secondary raw material, alkali activated material, foaming, homogenization, mechanical strength
Published in DiRROS: 21.12.2023; Views: 267; Downloads: 87
 Full text (15,82 MB)
This document has many files! More... |
35. Merjeni in izračunani fotobiološki učinki odbite svetlobe na ljudiKatja Malovrh Rebec, 2018, original scientific article Abstract: Pri načrtovanju osvetlitve izračuni le delno napovejo vplive svetlobe na uporabnike prostorov. Svetloba ima namreč poleg dobro poznanih slikovnih učinkov, ki jih možgani interpretirajo na podlagi odzivov čepkov in paličic, tudi neslikovne učinke. Ti ne pripomorejo k orientaciji v prostoru, temveč sporočajo telesu ključne informacije, ki vplivajo na tvorbo hormonov. Vrh te zaznave je v modrem delu spektra vidne svetlobe. Žal delovanja teh fotoreceptorjev še ne opisujemo s parametri, ustaljenimi v praksi projektiranja, zato so vplivi na uporabnike pogosto prezrti. Dodaten izziv pomeni praksa, pri kateri svetlobne učinke preračunavamo v lukse, kar pomeni, da jih množimo s povprečnim človeškim dnevnim vidom. Tak pristop ni primeren za vrednotenje neslikovnih učinkov, ker imajo drugo akcijsko krivuljo. Izmerili smo spektralno sestavo odbitih dnevnih svetlob v modelnem prostoru, ker nas je zanimalo, kakšne razlike nastanejo v slikovni in neslikovni zaznavi, če pobarvamo stene z različnimi barvami. Modra in vijoličasta stena neslikovno stimulirata opazovalca bolj kot slikovno v obeh opazovanih smereh pogleda, oranžna v obeh primerih neslikovno vpliva manj, pri zeleni pa je bila neslikovna zaznava bolj stimulirana od slikovne pri pogledu naprej, pri pogledu v mizo pa je bilo obratno.
Keywords: svetloba, fotobiološki vpliv, spektralna sestava svetlobe, dnevna svetloba
Published in DiRROS: 21.12.2023; Views: 216; Downloads: 76
Full text (355,93 KB)
This document has many files! More... |
36. Pathway toward sustainable winter road maintenance (case study)Katja Malovrh Rebec, Janez Turk, 2023, independent scientific component part or a chapter in a monograph Abstract: Life Cycle Assessment (LCA) method was applied to evaluate the environmental impacts of winter road maintenance managed by an innovative road-weather information system and the impacts of vehicles passing the road during the snowstorm event. A case study refers to 10-hour lasting snowstorm event, considering a specific road section and application of a road-weather information management system to help winter road maintenance agency optimizing activities (salt gritting and/or plowing). Reliable information on the timing of the beginning of the snowstorm event affects (1) the activities of winter road maintenance, (2) the mobility of all vehicles passing the road, and (3) the fuel consumption of the vehicles. Since activities are optimized in case of preventive operation of winter road maintenance, less salt is needed overall. The road remains free of snow cover in case of preventive winter road maintenance operation, meaning that passenger cars and trucks pass the road at normal speed, without undesirable acceleration and braking caused by wheels slipping if snow accumulates on the road. Fuel consumption of vehicles passing salted and snow-free road remains unchanged, while fuel consumption increases in case of snow cover. Reduction of environmental burdens in case of such optimized winter road maintenance operation, is shown in this case study. The overall results of the comparative LCA analysis showed that the use of the road-weather information system in road traffic allows for as much as 25% reduction of environmental footprints. In the scenario where the winter service does not use information system the winter service also uses 40% more salt, which is also related with additional environmental impacts.
Keywords: LCA, okoljski odtisi, cesta, snežne razmere, preventivno delovanje, promet, poraba goriva, varnost, LCA, environmental impacts, road, snow cover, preventive operation, traffic, fuel consumption, safety
Published in DiRROS: 11.12.2023; Views: 191; Downloads: 136
Full text (19,01 MB)
This document has many files! More... |
37. Pozicioniranje in kontrola kakovosti mamogramaZvonko Krajnc, Miljeva Rener, Alenka Rataj, Patricija Rusjan, Gregor Novak, Katja Čebulj, 2004, published scientific conference contribution Abstract: Izhodišča. Pravilno pozicioniranje je predpogoj za zagotavljanje kakovosti mamografskih slik. Zato je pomembno, da dobro poznamo anatomijo in tehnike pozicioniranja, slikanja in razvijanja. Zaključki. Da bi dosegli optimalen prikaz tkiv, rnorarno pravilno nastaviti nosilec kasete in kompresorij ter izkoristiti premakljivost dojk, pomembna pa je tudi pravilna uporaba aparatur.Ob izvajanju mamografije moramo nujno upoštevati kriterije za kontrolo kakovosti. Pri tem nam pomaga pravilnik o pogojih, ki jih morajo izpolnjevati primarni centri za dojke v Republiki Sloveniji, ter evropske smernice. S kontrolo kakovosti bomo u Sloveniji zvišali kvaliteto in s tem prispevali k čirn zgodnejšemu odkrivanju sprememb na dojkah.
Published in DiRROS: 01.12.2023; Views: 255; Downloads: 62
Full text (2,14 MB) |
38. |
39. Particle size manipulation as an influential parameter in the development of mechanical properties in electric arc furnace slag-based AAMKatja Traven, Mark Češnovar, Vilma Ducman, 2019, original scientific article Abstract: Alkali-activated materials (AAM) have gained recognition as a promising alternative to technical ceramic and building materials owing to the lower energy demands for production and the potential to use slag as a precursor. In the present study, five sets of slag-based AAM pastes were prepared with different particle sizes (fractions d < 63, 63 < d < 90, and 90 < d < 125 μm in different mass ratios) under the same curing regime and using a fixed precursor to activator (water) mass ratio. Precursors and the hardened AAM are evaluated using BET, XRD, XRF, SEM, FTIR, reactivity of precursors by leaching, and mercury intrusion porosimetry (MIP). Chemical analysis indicated only marginal differences among the different-sized fractions of input materials, whereas the BET surface area and reactivity among the precursors differed significantly-smaller particles had the largest surface area, and thus, higher reactivity. The mineralogical differences between the precursors and hardened AAM were negligible. The results revealed that compressive strength was significantly influenced by particle size, i.e., a threefold increase in strength when the particle size was halved. Microstructural evaluation using MIP confirmed that the porosity was the lowest in AAM with the smallest particle size. The low porosity and high reactivity of the fine fractions led to the highest compressive strength, confirming that manipulation of particle size can significantly influence the mechanical properties.
Keywords: alkalijsko aktivirani materiali, žlindra iz obločne peči, mehanska aktivacija, mehanske lastnosti, poroznost, alkali-activated materials (AAM), electric arc furnace steel slag, mechanical activation, mechanical properties, porosity
Published in DiRROS: 22.11.2023; Views: 295; Downloads: 145
Full text (2,26 MB)
This document has many files! More... |
40. |
