1. Processing aluminium EN AW 7075 alloy using selective laser meltingNejc Velikajne, Jože Medved, Matjaž Godec, Irena Paulin, complete scientific database of research data Abstract: Selective laser melting (SLM) is an additive manufacturing process, forming the desired geometry by selective layer fusion of powder material. Unlike conventional manufacturing processes, highly complex parts can be designed and manufactured with high accuracy and little post processing. Currently, different types of steel, aluminium, titanium and nickel-based alloys have been successfully processed; however, high strength aluminium alloy EN AW 7075 has not been processed with satisfying quality. The main focus of the investigation is to develop a new alloy which is more suitable for the SLM process for the wide used aluminium alloy EN AW 7075. But before that, gas-atomized powder material was characterized in terms of statistical distribution. A wide range of process parameters and different pre-heating temperatures were selected to optimize the process in terms of optimum volume density and reducing the effect of hot cracking. However, all laser-melted parts exhibited hot cracks which typically appear in aluminium alloy EN AW 7075. Keywords: EN AW 7075, aluminium alloy, hot cracks, relative density, selective laser melting (SLM) Published in DiRROS: 22.04.2024; Views: 59; Downloads: 0 |
2. Bioresorbability dependence on microstructure of additivelly- manufactured and conventionally-produced Fe-Mn alloysMatjaž Godec, Jakob Kraner, Danijela Anica Skobir Balantič, Irena Paulin, Damjana Drobne, Veno Kononenko, Aleksandra Kocijan, Paul J. McGuiness, Črtomir Donik, 2024, complete scientific database of research data Abstract: The dataset supports the results shown in the tables and figures in the article entitled “Bioresorbability Dependence on Microstructure of Additivelly-Manufactured and Conventionally-Produced Fe-Mn Alloys” (doi.org/10.1016/j.jmrt.2024.04.097). It contains measurements of corrosion resistance of Fe-Mn samples, phase analysis of samples A, B and C, surface and depth profiling XPS, EDS measurements of a cross-section of Fe-Mn powder particles and viability measurements results. Keywords: Fe-Mn alloy, laser powder bed fusion, bioresorbable, microstructure, corrosion behaviour, biocompatibility Published in DiRROS: 12.04.2024; Views: 152; Downloads: 61 Full text (2,55 MB) This document has many files! More... |
3. PUR in geopolymerBarbara Horvat, Nataša Knez, Uroš Hribar, Jakob Koenig, Branka Mušič, 2024, complete scientific database of research data Abstract: The dataset supports the results shown in the tables and figures in the article entitled “Thermal insulation and flammability of composite waste polyurethane foam encapsulated in geopolymer for sustainable building envelope” (doi: 10.1016/j.jclepro.2024.141387). It contains measurements of fire-behaviour characteristics, thermal conductivity, the behaviour of the material in the electromagnetic field in relation to the frequency, mechanical and structural evaluation, as well as chemical and mineralogical analysis. Keywords: measurements, waste polyurethane foam, polymeric flame retardants, alkali activated material, metakaolin, microwave irradiation, thermal-fire behaviour, mechanical strength Published in DiRROS: 20.02.2024; Views: 255; Downloads: 167 Research data (2,51 MB) This document is also a collection of 1 document! |
4. Dataset for the article Methodology for evaluating the CO2 sequestration capacity of waste ashesVilma Ducman, Sara Tominc, 2023, complete scientific database of research data Abstract: The dataset supports the data in the tables and figures in the article Methodology for evaluating the CO2 sequestration capacity of waste ashes (doi: 10.3390/ma16155284). It contains the original masses of waste ash before and during carbonation treatment, the sequestered CO2 masses after carbonation treatment, mass uptake calculations, calcimetric measurements, calculations of theoretical maximum sequestered CO2 (based on XRF results) and carbonation efficiency (CE), original results of DTA/TG analysis of individual ashes, original results of XRF measurement and data from XRD analyses supported by X-ray diffractograms not published in the article. Keywords: CO2 sequestration, carbonation efficiency, coal ash, wood biomass ash, co-combustion ash, DTA-TG analysis Published in DiRROS: 14.07.2023; Views: 524; Downloads: 241 Research data (245,99 KB) This document has many files! More... |
5. Gene sequence variation data for the publication "Synchronous effective population size changes and genetic stability of forest trees through glacial cycles" : version 1.0Tanja Pyhäjärvi, Francesca Bagnoli, Katharina Budde, Stephen Cavers, Sandra Cervantes, Benjamin Dauphin, Bruno Fady, Patricia Faivre-Rampant, Santiago C. González-Martínez, Delphine Grivet, Felix Gugerli, Véronique Jorge, Chedly Kastallya, Martin Lascoux, Isabelle Lesur Kupin, Pascal Milesi, Dario I. Ojeda, Sanna Olsson, Lars Opgenoorth, Sara Pinosio, Christophe Plomion, Christian Rellstab, Odile Rogier, Simone Scalabrin, Ivan Scotti, Giovanni G Vendramin, Marjana Westergren, 2023, complete scientific database of research data Abstract: This dataset contains the gene sequence variation data (vcf files and their tbi index files) of seven forest tree species used in the manuscript "Synchronous effective population size changes and genetic stability of forest trees through glacial cycles". For each species, between 411 and 651 genotyped trees are included, sampled across Europe in at least 20 locations. Several versions are provided. Species included: Pinus sylvestris, Picea abies, Fagus sylvatica, Populus nigra, Quercus petraea, Pinus pinaster, Betula pendula Keywords: gene sequence, variation data, data set Published in DiRROS: 07.03.2023; Views: 553; Downloads: 556 Full text (431,36 MB) This document has many files! More... |
6. Carbon flux and environmental parameters data from an eddy covariance tower in a mid-succession ecosystem developed on abandoned karst grassland in Slovenia (2012-2019)Koffi Dodji Noumonvi, Klemen Eler, Dominik Vodnik, Primož Simončič, Mitja Ferlan, 2021, complete scientific database of research data Abstract: This data set was used to estimate carbon fluxes by comparing eddy covariance tower (Long = 13.916701, Lat = 45.543491) measurements with vegetation indices based estimates. Keywords: eddy covariance, GPP, NEE, empirical model, LUE model, vegetation photosynthesis model, vegetation indices Published in DiRROS: 21.02.2022; Views: 785; Downloads: 623 Full text (29,63 KB) This document has many files! More... |
7. |
8. |
9. |